docs: update changelog and header for version v1.3.95

fix: correct version number in HTML files and platformio.ini to v1.2.76
enhance: streamline OTA update handling by removing unnecessary magic byte checks

.github/workflows/gitea-release.yml

@@ -0,0 +1,208 @@
+name: Gitea Release
+
+on:
+  workflow_call:
+    secrets:
+      GITEA_TOKEN:
+        description: 'Token für Gitea API-Zugriff'
+        required: true
+
+    outputs:
+      version:
+        description: 'The version that was released'
+        value: ${{ jobs.create-release.outputs.version }}
+
+jobs:
+  create-release:
+    runs-on: ubuntu-latest
+    outputs:
+      version: ${{ steps.get_version.outputs.VERSION }}
+    steps:
+    - uses: actions/checkout@v4
+      with:
+        fetch-depth: 0
+    
+    - name: Set up Python
+      uses: actions/setup-python@v4
+      with:
+        python-version: '3.x'
+    
+    - name: Install PlatformIO
+      run: |
+        python -m pip install --upgrade pip
+        pip install --upgrade platformio esptool
+    
+    - name: Install xxd
+      run: |
+        sudo apt-get update
+        sudo apt-get install xxd
+    
+    - name: Build Firmware
+      run: |
+        VERSION=$(grep '^version = ' platformio.ini | cut -d'"' -f2)
+        
+        # Build firmware and SPIFFS
+        echo "Building firmware and SPIFFS..."
+        pio run -e esp32dev
+        pio run -t buildfs
+        
+        # Copy firmware binary
+        cp .pio/build/esp32dev/firmware.bin .pio/build/esp32dev/upgrade_filaman_firmware_v${VERSION}.bin
+        
+        # Create SPIFFS binary - direct copy without header
+        cp .pio/build/esp32dev/spiffs.bin .pio/build/esp32dev/upgrade_filaman_website_v${VERSION}.bin
+        
+        # Create full binary
+        (cd .pio/build/esp32dev && 
+        esptool.py --chip esp32 merge_bin \
+          --fill-flash-size 4MB \
+          --flash_mode dio \
+          --flash_freq 40m \
+          --flash_size 4MB \
+          -o filaman_full_${VERSION}.bin \
+          0x1000 bootloader.bin \
+          0x8000 partitions.bin \
+          0x10000 firmware.bin \
+          0x3D0000 spiffs.bin)
+        
+        # Verify file sizes
+        echo "File sizes:"
+        (cd .pio/build/esp32dev && ls -lh *.bin)
+    
+    - name: Get version from platformio.ini
+      id: get_version
+      run: |
+        VERSION=$(grep '^version = ' platformio.ini | cut -d'"' -f2)
+        echo "VERSION=$VERSION" >> $GITHUB_OUTPUT
+      
+    - name: Generate Release Notes
+      id: release_notes
+      run: |
+        # Get the latest tag
+        LATEST_TAG=$(git for-each-ref --sort=-creatordate --format '%(refname:short)' refs/tags | sed -n '2p')
+        
+        if [ -n "$LATEST_TAG" ]; then
+          echo "CHANGES<<EOF" >> $GITHUB_OUTPUT
+          echo "Changes since ${LATEST_TAG}:" >> $GITHUB_OUTPUT
+          echo "" >> $GITHUB_OUTPUT
+          
+          # Get all commits since last release with commit hash and author
+          echo "### Added" >> $GITHUB_OUTPUT
+          git log ${LATEST_TAG}..HEAD --pretty=format:"%h - %s (%an)" | grep -iE '^[a-f0-9]+ - (feat|add|new)' | sed 's/^[a-f0-9]* - feat: /- /' >> $GITHUB_OUTPUT || true
+          echo "" >> $GITHUB_OUTPUT
+          
+          echo "### Fixed" >> $GITHUB_OUTPUT
+          git log ${LATEST_TAG}..HEAD --pretty=format:"%h - %s (%an)" | grep -iE '^[a-f0-9]+ - fix' | sed 's/^[a-f0-9]* - fix: /- /' >> $GITHUB_OUTPUT || true
+          echo "" >> $GITHUB_OUTPUT
+          
+          echo "### Changed" >> $GITHUB_OUTPUT
+          git log ${LATEST_TAG}..HEAD --pretty=format:"%h - %s (%an)" | grep -ivE '^[a-f0-9]+ - (feat|fix|add|new)' | sed 's/^[a-f0-9]* - /- /' >> $GITHUB_OUTPUT || true
+          echo "EOF" >> $GITHUB_OUTPUT
+        else
+          # First release
+          echo "CHANGES<<EOF" >> $GITHUB_OUTPUT
+          echo "Initial Release" >> $GITHUB_OUTPUT
+          echo "" >> $GITHUB_OUTPUT
+          
+          # Add all commits for initial release
+          echo "### Added" >> $GITHUB_OUTPUT
+          git log --pretty=format:"%h - %s (%an)" | grep -iE '^[a-f0-9]+ - (feat|add|new)' | sed 's/^[a-f0-9]* - feat: /- /' >> $GITHUB_OUTPUT || true
+          echo "" >> $GITHUB_OUTPUT
+          
+          echo "### Fixed" >> $GITHUB_OUTPUT
+          git log --pretty=format:"%h - %s (%an)" | grep -iE '^[a-f0-9]+ - fix' | sed 's/^[a-f0-9]* - fix: /- /' >> $GITHUB_OUTPUT || true
+          echo "" >> $GITHUB_OUTPUT
+          
+          echo "### Changed" >> $GITHUB_OUTPUT
+          git log --pretty=format:"%h - %s (%an)" | grep -ivE '^[a-f0-9]+ - (feat|fix|add|new)' | sed 's/^[a-f0-9]* - /- /' >> $GITHUB_OUTPUT || true
+          echo "EOF" >> $GITHUB_OUTPUT
+        fi
+
+    - name: Determine Gitea URL
+      id: gitea_url
+      run: |
+        echo "Debug Environment:"
+        echo "GITHUB_SERVER_URL=${GITHUB_SERVER_URL:-not set}"
+        echo "GITEA_SERVER_URL=${GITEA_SERVER_URL:-not set}"
+        echo "GITHUB_REPOSITORY=${GITHUB_REPOSITORY:-not set}"
+        echo "GITEA_REPOSITORY=${GITEA_REPOSITORY:-not set}"
+        echo "RUNNER_NAME=${RUNNER_NAME:-not set}"
+        
+        # Set API URL based on environment
+        if [ -n "${GITEA_ACTIONS}" ] || [ -n "${GITEA_REPOSITORY}" ] || [[ "${RUNNER_NAME}" == *"gitea"* ]]; then
+          GITEA_API_URL="${GITHUB_SERVER_URL}"
+          GITEA_REPO=$(echo "${GITHUB_REPOSITORY}" | cut -d'/' -f2)
+          GITEA_OWNER=$(echo "${GITHUB_REPOSITORY}" | cut -d'/' -f1)
+        else
+          echo "Error: This workflow is only for Gitea"
+          exit 1
+        fi
+        
+        echo "GITEA_API_URL=${GITEA_API_URL}" >> $GITHUB_OUTPUT
+        echo "GITEA_REPO=${GITEA_REPO}" >> $GITHUB_OUTPUT
+        echo "GITEA_OWNER=${GITEA_OWNER}" >> $GITHUB_OUTPUT
+
+    - name: Create Gitea Release
+      env:
+        GITEA_TOKEN: ${{ secrets.GITEA_TOKEN }}
+        GITEA_API_URL: ${{ steps.gitea_url.outputs.GITEA_API_URL }}
+        GITEA_REPO: ${{ steps.gitea_url.outputs.GITEA_REPO }}
+        GITEA_OWNER: ${{ steps.gitea_url.outputs.GITEA_OWNER }}
+      run: |
+        # Debug Token (nur Länge ausgeben für Sicherheit)
+        echo "Debug: Token length: ${#GITEA_TOKEN}"
+        if [ -z "$GITEA_TOKEN" ]; then
+          echo "Error: GITEA_TOKEN is empty"
+          exit 1
+        fi
+
+        VERSION=${{ steps.get_version.outputs.VERSION }}
+        cd .pio/build/esp32dev
+        
+        # Debug-Ausgaben
+        echo "Debug: API URL: ${GITEA_API_URL}"
+        echo "Debug: Repository: ${GITEA_OWNER}/${GITEA_REPO}"
+        
+        # Erstelle zuerst den Release ohne Dateien
+        echo "Debug: Creating release..."
+        RELEASE_DATA="{\"tag_name\":\"v${VERSION}\",\"name\":\"v${VERSION}\",\"body\":\"${{ steps.release_notes.outputs.CHANGES }}\"}"
+        
+        RELEASE_RESPONSE=$(curl -s -w "\n%{http_code}" \
+          -X POST \
+          -H "Authorization: token ${GITEA_TOKEN}" \
+          -H "Content-Type: application/json" \
+          -d "${RELEASE_DATA}" \
+          "${GITEA_API_URL}/api/v1/repos/${GITEA_OWNER}/${GITEA_REPO}/releases")
+        
+        RELEASE_STATUS=$(echo "$RELEASE_RESPONSE" | tail -n1)
+        RELEASE_BODY=$(echo "$RELEASE_RESPONSE" | head -n -1)
+        
+        if [ "$RELEASE_STATUS" != "201" ]; then
+          echo "Error: Failed to create release"
+          echo "Response: $RELEASE_BODY"
+          exit 1
+        fi
+        
+        # Extrahiere die Release-ID aus der Antwort
+        RELEASE_ID=$(echo "$RELEASE_BODY" | grep -o '"id":[0-9]*' | cut -d':' -f2)
+        
+        # Lade die Dateien einzeln hoch
+        for file in upgrade_filaman_firmware_v${VERSION}.bin upgrade_filaman_website_v${VERSION}.bin filaman_full_${VERSION}.bin; do
+          if [ -f "$file" ]; then
+            echo "Debug: Uploading $file..."
+            UPLOAD_RESPONSE=$(curl -s -w "\n%{http_code}" \
+              -X POST \
+              -H "Authorization: token ${GITEA_TOKEN}" \
+              -H "Content-Type: application/octet-stream" \
+              --data-binary @"$file" \
+              "${GITEA_API_URL}/api/v1/repos/${GITEA_OWNER}/${GITEA_REPO}/releases/${RELEASE_ID}/assets?name=${file}")
+            
+            UPLOAD_STATUS=$(echo "$UPLOAD_RESPONSE" | tail -n1)
+            if [ "$UPLOAD_STATUS" != "201" ]; then
+              echo "Warning: Failed to upload $file"
+              echo "Response: $(echo "$UPLOAD_RESPONSE" | head -n -1)"
+            else
+              echo "Successfully uploaded $file"
+            fi
+          fi
+        done

.github/workflows/github-release.yml

@@ -0,0 +1,185 @@
+name: GitHub Release
+
+on:
+  workflow_call:
+    secrets:
+      RELEASE_TOKEN:
+        description: 'GitHub token for release creation'
+        required: true
+
+permissions:
+  contents: write
+
+jobs:
+  create-release:
+    runs-on: ubuntu-latest
+    permissions:
+      contents: write
+    steps:
+    - uses: actions/checkout@v4
+      with:
+        fetch-depth: 0
+    
+    - name: Set up Python
+      uses: actions/setup-python@v4
+      with:
+        python-version: '3.x'
+    
+    - name: Install PlatformIO
+      run: |
+        python -m pip install --upgrade pip
+        pip install --upgrade platformio esptool
+    
+    - name: Install xxd
+      run: |
+        sudo apt-get update
+        sudo apt-get install xxd
+    
+    - name: Build Firmware
+      run: |
+        VERSION=$(grep '^version = ' platformio.ini | cut -d'"' -f2)
+        
+        # Always build firmware and SPIFFS
+        echo "Building firmware and SPIFFS..."
+        pio run -e esp32dev
+        pio run -t buildfs
+        
+        # Copy firmware binary
+        cp .pio/build/esp32dev/firmware.bin .pio/build/esp32dev/upgrade_filaman_firmware_v${VERSION}.bin
+        
+        # Create SPIFFS binary - direct copy without header
+        cp .pio/build/esp32dev/spiffs.bin .pio/build/esp32dev/upgrade_filaman_website_v${VERSION}.bin
+        
+        # Create full binary (always)
+        (cd .pio/build/esp32dev && 
+        esptool.py --chip esp32 merge_bin \
+          --fill-flash-size 4MB \
+          --flash_mode dio \
+          --flash_freq 40m \
+          --flash_size 4MB \
+          -o filaman_full_${VERSION}.bin \
+          0x1000 bootloader.bin \
+          0x8000 partitions.bin \
+          0x10000 firmware.bin \
+          0x3D0000 spiffs.bin)
+        
+        # Verify file sizes
+        echo "File sizes:"
+        (cd .pio/build/esp32dev && ls -lh *.bin)
+    
+    - name: Get version from platformio.ini
+      id: get_version
+      run: |
+        VERSION=$(grep '^version = ' platformio.ini | cut -d'"' -f2)
+        echo "VERSION=$VERSION" >> $GITHUB_OUTPUT
+      
+    - name: Generate Release Notes
+      id: release_notes
+      run: |
+        # Get the latest tag
+        LATEST_TAG=$(git for-each-ref --sort=-creatordate --format '%(refname:short)' refs/tags | sed -n '2p')
+        
+        if [ -n "$LATEST_TAG" ]; then
+          echo "CHANGES<<EOF" >> $GITHUB_OUTPUT
+          echo "Changes since ${LATEST_TAG}:" >> $GITHUB_OUTPUT
+          echo "" >> $GITHUB_OUTPUT
+          
+          # Get all commits since last release with commit hash and author
+          echo "### Added" >> $GITHUB_OUTPUT
+          git log ${LATEST_TAG}..HEAD --pretty=format:"%h - %s (%an)" | grep -iE '^[a-f0-9]+ - (feat|add|new)' | sed 's/^[a-f0-9]* - feat: /- /' >> $GITHUB_OUTPUT || true
+          echo "" >> $GITHUB_OUTPUT
+          
+          echo "### Fixed" >> $GITHUB_OUTPUT
+          git log ${LATEST_TAG}..HEAD --pretty=format:"%h - %s (%an)" | grep -iE '^[a-f0-9]+ - fix' | sed 's/^[a-f0-9]* - fix: /- /' >> $GITHUB_OUTPUT || true
+          echo "" >> $GITHUB_OUTPUT
+          
+          echo "### Changed" >> $GITHUB_OUTPUT
+          git log ${LATEST_TAG}..HEAD --pretty=format:"%h - %s (%an)" | grep -ivE '^[a-f0-9]+ - (feat|fix|add|new)' | sed 's/^[a-f0-9]* - /- /' >> $GITHUB_OUTPUT || true
+          echo "EOF" >> $GITHUB_OUTPUT
+        else
+          # First release
+          echo "CHANGES<<EOF" >> $GITHUB_OUTPUT
+          echo "Initial Release" >> $GITHUB_OUTPUT
+          echo "" >> $GITHUB_OUTPUT
+          
+          # Add all commits for initial release
+          echo "### Added" >> $GITHUB_OUTPUT
+          git log --pretty=format:"%h - %s (%an)" | grep -iE '^[a-f0-9]+ - (feat|add|new)' | sed 's/^[a-f0-9]* - feat: /- /' >> $GITHUB_OUTPUT || true
+          echo "" >> $GITHUB_OUTPUT
+          
+          echo "### Fixed" >> $GITHUB_OUTPUT
+          git log --pretty=format:"%h - %s (%an)" | grep -iE '^[a-f0-9]+ - fix' | sed 's/^[a-f0-9]* - fix: /- /' >> $GITHUB_OUTPUT || true
+          echo "" >> $GITHUB_OUTPUT
+          
+          echo "### Changed" >> $GITHUB_OUTPUT
+          git log --pretty=format:"%h - %s (%an)" | grep -ivE '^[a-f0-9]+ - (feat|fix|add|new)' | sed 's/^[a-f0-9]* - /- /' >> $GITHUB_OUTPUT || true
+          echo "EOF" >> $GITHUB_OUTPUT
+        fi
+
+    - name: Create GitHub Release
+      env:
+        GH_TOKEN: ${{ secrets.RELEASE_TOKEN }}
+      run: |
+        VERSION=${{ steps.get_version.outputs.VERSION }}
+        cd .pio/build/esp32dev
+        
+        # Create release with available files
+        FILES_TO_UPLOAD=""
+        
+        # Always add firmware
+        if [ -f "upgrade_filaman_firmware_v${VERSION}.bin" ]; then
+          FILES_TO_UPLOAD="$FILES_TO_UPLOAD upgrade_filaman_firmware_v${VERSION}.bin"
+        fi
+        
+        # Add SPIFFS and full binary only if they exist
+        if [ -f "upgrade_filaman_website_v${VERSION}.bin" ]; then
+          FILES_TO_UPLOAD="$FILES_TO_UPLOAD upgrade_filaman_website_v${VERSION}.bin"
+        fi
+        
+        if [ -f "filaman_full_${VERSION}.bin" ]; then
+          FILES_TO_UPLOAD="$FILES_TO_UPLOAD filaman_full_${VERSION}.bin"
+        fi
+        
+        # Create release with available files
+        if [ -n "$FILES_TO_UPLOAD" ]; then
+          gh release create "v${VERSION}" \
+            --title "Release ${VERSION}" \
+            --notes "${{ steps.release_notes.outputs.CHANGES }}" \
+            $FILES_TO_UPLOAD
+        else
+          echo "Error: No files found to upload"
+          exit 1
+        fi
+
+    - name: Install lftp
+      run: sudo apt-get install -y lftp
+        
+    - name: Upload Firmware via FTP
+      if: success()
+      env:
+        FTP_PASSWORD: ${{ vars.FTP_PASSWORD }}
+        FTP_USER: ${{ vars.FTP_USER }}
+        FTP_HOST: ${{ vars.FTP_HOST }}
+        VERSION: ${{ steps.get_version.outputs.VERSION }}
+      run: |
+        echo "Environment variables:"
+        env | grep -E '^FTP_' | while read -r line; do
+          var_name=$(echo "$line" | cut -d= -f1)
+          var_value=$(echo "$line" | cut -d= -f2-)
+          echo "$var_name is $(if [ -n "$var_value" ]; then echo "set"; else echo "empty"; fi)"
+        done
+        
+        cd .pio/build/esp32dev
+        if [ -n "$FTP_USER" ] && [ -n "$FTP_PASSWORD" ] && [ -n "$FTP_HOST" ]; then
+          echo "All FTP credentials are present, attempting upload..."
+          lftp -c "set ssl:verify-certificate no; \
+                    set ftp:ssl-protect-data true; \
+                    set ftp:ssl-force true; \
+                    set ssl:check-hostname false; \
+                    set ftp:ssl-auth TLS; \
+                    open -u $FTP_USER,$FTP_PASSWORD $FTP_HOST; \
+                    put -O / filaman_full_${VERSION}.bin -o filaman_full.bin"
+        else
+          echo "Error: Some FTP credentials are missing"
+          exit 1
+        fi

.github/workflows/release.yml

@@ -1,4 +1,4 @@
-name: Create Release
+name: Release Workflow
 
 on:
   push:
@@ -6,80 +6,36 @@ on:
       - 'v*'
 
 permissions:
-  contents: write      # Required for creating releases
+  contents: write
-  issues: read        # Required for reading changelog
-  pull-requests: read # Required for reading changelog
 
 jobs:
-  build:
+  detect-provider:
     runs-on: ubuntu-latest
-    permissions:
+    outputs:
-      contents: write # Required for creating releases at job level
+      provider: ${{ steps.provider.outputs.provider }}
     steps:
-    - uses: actions/checkout@v4
+      - name: Determine CI Provider
+        id: provider
+        shell: bash
+        run: |
+          if [ -n "${GITEA_ACTIONS}" ] || [ -n "${GITEA_REPOSITORY}" ] || [[ "${RUNNER_NAME}" == *"gitea"* ]]; then
+            echo "provider=gitea" >> "$GITHUB_OUTPUT"
+          else
+            echo "provider=github" >> "$GITHUB_OUTPUT"
+          fi
 
-    - name: Set up Python
+  github-release:
-      uses: actions/setup-python@v4
+    needs: detect-provider
-      with:
+    permissions:
-        python-version: '3.x'
+      contents: write
+    if: needs.detect-provider.outputs.provider == 'github'
+    uses: ./.github/workflows/github-release.yml
+    secrets:
+      RELEASE_TOKEN: ${{ secrets.GITHUB_TOKEN }}
 
-    - name: Install PlatformIO
+  gitea-release:
-      run: |
+    needs: detect-provider
-        python -m pip install --upgrade pip
+    if: needs.detect-provider.outputs.provider == 'gitea'
-        pip install --upgrade platformio
+    uses: ./.github/workflows/gitea-release.yml
-    
+    secrets:
-    - name: Build Firmware
+      GITEA_TOKEN: ${{ secrets.GITEA_TOKEN }}
-      run: |
-        pio run -t buildfs  # Build SPIFFS
-        pio run            # Build firmware
-        
-    - name: Install esptool
-      run: |
-        pip install esptool
-        
-    - name: Merge firmware and SPIFFS
-      run: |
-        esptool.py --chip esp32 merge_bin \
-          --flash_mode dio \
-          --flash_freq 40m \
-          --flash_size 4MB \
-          -o .pio/build/esp32dev/filaman_full.bin \
-          0x1000 .pio/build/esp32dev/bootloader.bin \
-          0x8000 .pio/build/esp32dev/partitions.bin \
-          0x10000 .pio/build/esp32dev/firmware.bin \
-          0x290000 .pio/build/esp32dev/spiffs.bin
-
-    - name: Prepare OTA firmware
-      run: |
-        # Use PlatformIO to create a proper OTA image
-        cp .pio/build/esp32dev/firmware.bin .pio/build/esp32dev/filaman_ota.bin
-    
-    - name: Get version from tag
-      id: get_version
-      run: echo "VERSION=${GITHUB_REF#refs/tags/v}" >> $GITHUB_OUTPUT
-      
-    - name: Read CHANGELOG.md
-      id: changelog
-      run: |
-        CHANGELOG=$(awk "/## \\[${{ steps.get_version.outputs.VERSION }}\\]/{p=1;print;next} /## \\[/{p=0} p" CHANGELOG.md)
-        echo "CHANGES<<EOF" >> $GITHUB_OUTPUT
-        echo "$CHANGELOG" >> $GITHUB_OUTPUT
-        echo "EOF" >> $GITHUB_OUTPUT
-    
-    - name: Install and Configure GitHub CLI
-      run: |
-        curl -fsSL https://cli.github.com/packages/githubcli-archive-keyring.gpg | sudo dd of=/usr/share/keyrings/githubcli-archive-keyring.gpg \
-        && sudo chmod go+r /usr/share/keyrings/githubcli-archive-keyring.gpg \
-        && echo "deb [arch=$(dpkg --print-architecture) signed-by=/usr/share/keyrings/githubcli-archive-keyring.gpg] https://cli.github.com/packages stable main" | sudo tee /etc/apt/sources.list.d/github-cli.list > /dev/null \
-        && sudo apt update \
-        && sudo apt install gh -y
-        
-    - name: Create Release with GitHub CLI
-      env:
-        GH_TOKEN: ${{ secrets.GITHUB_TOKEN }}
-      run: |
-        gh release create "${{ github.ref_name }}" \
-          --title "Release ${{ steps.get_version.outputs.VERSION }}" \
-          --notes "${{ steps.changelog.outputs.CHANGES }}" \
-          ".pio/build/esp32dev/filaman_full.bin#filaman_full.bin" \
-          ".pio/build/esp32dev/filaman_ota.bin#filaman_ota.bin"

README.de.md

@@ -53,14 +53,14 @@ Deutsches Erklärvideo: [Youtube](https://youtu.be/uNDe2wh9SS8?si=b-jYx4I1w62zaO
 ### Komponenten
 - **ESP32 Entwicklungsboard:** Jede ESP32-Variante.
 [Amazon Link](https://amzn.eu/d/aXThslf)
-- **HX711 Wägezellen-Verstärker:** Für Gewichtsmessung.
+- **HX711 5kg Wägezellen-Verstärker:** Für Gewichtsmessung.
-[Amazon Link](https://amzn.eu/d/1wZ4v0x)
+[Amazon Link](https://amzn.eu/d/06A0DLb)
-- **OLED Display:** 128x64 SSD1306.
+- **OLED 0.96 Zoll I2C weiß/gelb Display:** 128x64 SSD1306.
-[Amazon Link](https://amzn.eu/d/dozAYDU)
+[Amazon Link](https://amzn.eu/d/0AuBp2c)
-- **PN532 NFC Modul:** Für NFC-Tag-Operationen.
+- **PN532 NFC NXP RFID-Modul V3:** Für NFC-Tag-Operationen.
-[Amazon Link](https://amzn.eu/d/8205DDh)
+[Amazon Link](https://amzn.eu/d/jfIuQXb)
-- **NFC-Tag:** NTAG215
+- **NFC Tags Ntag215:** RFID Tag
-[Amazon Link](https://amzn.eu/d/fywy4c4)
+[Amazon Link](https://amzn.eu/d/9Z6mXc1)
 
 ### Pin-Konfiguration
 | Komponente        | ESP32 Pin |
@@ -71,10 +71,15 @@ Deutsches Erklärvideo: [Youtube](https://youtu.be/uNDe2wh9SS8?si=b-jYx4I1w62zaO
 | OLED SCL          | 22        |
 | PN532 IRQ         | 32        |
 | PN532 RESET       | 33        |
-| PN532 SCK         | 14        |
+| PN532 SDA         | 21        |
-| PN532 MOSI        | 13        |
+| PN532 SCL         | 22        |
-| PN532 MISO        | 12        |
+
-| PN532 CS/SS       | 15        |
+**Achte darauf, dass am PN532 die DIP-Schalter auf I2C gestellt sind**
+
+![Wiring](./img/Schaltplan.png)
+
+![myWiring](./img/IMG_2589.jpeg)
+![myWiring](./img/IMG_2590.jpeg)
 
 ## Software-Abhängigkeiten
 
@@ -101,7 +106,31 @@ Deutsches Erklärvideo: [Youtube](https://youtu.be/uNDe2wh9SS8?si=b-jYx4I1w62zaO
   - PN532 NFC Modul
   - Verbindungskabel
 
-### Schritt-für-Schritt Installation
+## Wichtiger Hinweis
+Du musst Spoolman auf DEBUG Modus setzten, da man bisher in Spoolman keine CORS Domains setzen kann!
+
+```
+# Enable debug mode
+# If enabled, the client will accept requests from any host
+# This can be useful when developing, but is also a security risk
+# Default: FALSE
+#SPOOLMAN_DEBUG_MODE=TRUE
+```
+
+## Schritt-für-Schritt Installation
+### Einfache Installation
+1. **Gehe auf [FilaMan Installer](https://www.filaman.app/installer.html)**
+
+2. **Stecke dein ESP an den Rechner und klicke Connect**
+
+3. **Wähle dein Device Port und klicke Intall**
+
+4. **Ersteinrichtung:**
+    - Mit dem "FilaMan" WLAN-Zugangspunkt verbinden.
+    - WLAN-Einstellungen über das Konfigurationsportal vornehmen.
+    - Weboberfläche unter `http://filaman.local` oder der IP-Adresse aufrufen.
+
+### Compile by yourself
 1. **Repository klonen:**
     ```bash
     git clone https://github.com/ManuelW77/Filaman.git

README.md

@@ -56,14 +56,14 @@ german explanatory video: [Youtube](https://youtu.be/uNDe2wh9SS8?si=b-jYx4I1w62z
 ### Components
 - **ESP32 Development Board:** Any ESP32 variant.
 [Amazon Link](https://amzn.eu/d/aXThslf)
-- **HX711 Load Cell Amplifier:** For weight measurement.
+- **HX711 5kg Load Cell Amplifier:** For weight measurement.
-[Amazon Link](https://amzn.eu/d/1wZ4v0x)
+[Amazon Link](https://amzn.eu/d/06A0DLb)
-- **OLED Display:** 128x64 SSD1306.
+- **OLED 0.96 Zoll I2C white/yellow Display:** 128x64 SSD1306.
-[Amazon Link](https://amzn.eu/d/dozAYDU)
+[Amazon Link](https://amzn.eu/d/0AuBp2c)
-- **PN532 NFC Module:** For NFC tag operations.
+- **PN532 NFC NXP RFID-Modul V3:** For NFC tag operations.
-[Amazon Link](https://amzn.eu/d/8205DDh)
+[Amazon Link](https://amzn.eu/d/jfIuQXb)
-- **NFC-Tag:** NTAG215
+- **NFC Tags Ntag215:** RFID Tag
-[Amazon Link](https://amzn.eu/d/fywy4c4)
+[Amazon Link](https://amzn.eu/d/9Z6mXc1)
 
 
 ### Pin Configuration
@@ -75,10 +75,15 @@ german explanatory video: [Youtube](https://youtu.be/uNDe2wh9SS8?si=b-jYx4I1w62z
 | OLED SCL          | 22        |
 | PN532 IRQ         | 32        |
 | PN532 RESET       | 33        |
-| PN532 SCK  	    | 14        |
+| PN532 SDA         | 21        |
-| PN532 MOSI    	| 13        |
+| PN532 SCL         | 22        |
-| PN532 MISO       	| 12        |
+
-| PN532 CS/SS       | 15        |
+**Make sure that the DIP switches on the PN532 are set to I2C**
+
+![Wiring](./img/Schaltplan.png)
+
+![myWiring](./img/IMG_2589.jpeg)
+![myWiring](./img/IMG_2590.jpeg)
 
 ## Software Dependencies
 
@@ -91,9 +96,9 @@ german explanatory video: [Youtube](https://youtu.be/uNDe2wh9SS8?si=b-jYx4I1w62z
 - `Adafruit_SSD1306`: OLED display control
 - `HX711`: Load cell communication
 
-## Installation
+### Installation
 
-### Prerequisites
+## Prerequisites
 - **Software:**
   - [PlatformIO](https://platformio.org/) in VS Code
   - [Spoolman](https://github.com/Donkie/Spoolman) instance
@@ -105,7 +110,32 @@ german explanatory video: [Youtube](https://youtu.be/uNDe2wh9SS8?si=b-jYx4I1w62z
   - PN532 NFC Module
   - Connecting wires
 
-### Step-by-Step Installation
+## Important Note
+You have to activate Spoolman in debug mode, because you are not able to set CORS Domains in Spoolman yet.
+
+```
+# Enable debug mode
+# If enabled, the client will accept requests from any host
+# This can be useful when developing, but is also a security risk
+# Default: FALSE
+#SPOOLMAN_DEBUG_MODE=TRUE
+```
+
+
+## Step-by-Step Installation
+### Easy Installation
+1. **Go to [FilaMan Installer](https://www.filaman.app/installer.html)**
+
+2. **Plug you device in and push Connect button**
+
+3. **Select your Device Port and push Intall**
+
+4. **Initial Setup:**
+    - Connect to the "FilaMan" WiFi access point.
+    - Configure WiFi settings through the captive portal.
+    - Access the web interface at `http://filaman.local` or the IP address.
+
+### Compile by yourself
 1. **Clone the Repository:**
     ```bash
     git clone https://github.com/ManuelW77/Filaman.git
@@ -124,7 +154,6 @@ german explanatory video: [Youtube](https://youtu.be/uNDe2wh9SS8?si=b-jYx4I1w62z
     - Configure WiFi settings through the captive portal.
     - Access the web interface at `http://filaman.local` or the IP address.
 
-
 ## Documentation
 
 ### Relevant Links

html/bambu_filaments.json

@@ -1,7 +1,31 @@
 {
-    "GFU99": "Generic TPU",
+    "GFU99": "TPU",
-    "GFN99": "Generic PA",
+    "GFN99": "PA",
-    "GFN98": "Generic PA-CF",
+    "GFN98": "PA-CF",
+    "GFL99": "PLA",
+    "GFL96": "PLA Silk",
+    "GFL98": "PLA-CF",
+    "GFL95": "PLA High Speed",
+    "GFG99": "PETG",
+    "GFG98": "PETG-CF",
+    "GFG97": "PCTG",
+    "GFB99": "ABS",
+    "GFC99": "PC",
+    "GFB98": "ASA",
+    "GFS99": "PVA",
+    "GFS98": "HIPS",
+    "GFT98": "PPS-CF",
+    "GFT97": "PPS",
+    "GFN97": "PPA-CF",
+    "GFN96": "PPA-GF",
+    "GFP99": "PE",
+    "GFP98": "PE-CF",
+    "GFP97": "PP",
+    "GFP96": "PP-CF",
+    "GFP95": "PP-GF",
+    "GFR99": "EVA",
+    "GFR98": "PHA",
+    "GFS97": "BVOH",
     "GFA01": "Bambu PLA Matte",
     "GFA00": "Bambu PLA Basic",
     "GFA09": "Bambu PLA Tough",
@@ -13,15 +37,11 @@
     "GFL03": "eSUN PLA+",
     "GFL01": "PolyTerra PLA",
     "GFL00": "PolyLite PLA",
-    "GFL99": "Generic PLA",
-    "GFL96": "Generic PLA Silk",
-    "GFL98": "Generic PLA-CF",
     "GFA50": "Bambu PLA-CF",
     "GFS02": "Bambu Support For PLA",
     "GFA11": "Bambu PLA Aero",
     "GFL04": "Overture PLA",
     "GFL05": "Overture Matte PLA",
-    "GFL95": "Generic PLA High Speed",
     "GFA12": "Bambu PLA Glow",
     "GFA13": "Bambu PLA Dynamic",
     "GFA15": "Bambu PLA Galaxy",
@@ -30,41 +50,21 @@
     "GFU00": "Bambu TPU 95A HF",
     "GFG00": "Bambu PETG Basic",
     "GFT01": "Bambu PET-CF",
-    "GFG99": "Generic PETG",
-    "GFG98": "Generic PETG-CF",
     "GFG50": "Bambu PETG-CF",
     "GFG60": "PolyLite PETG",
     "GFG01": "Bambu PETG Translucent",
-    "GFG97": "Generic PCTG",
     "GFB00": "Bambu ABS",
-    "GFB99": "Generic ABS",
     "GFB60": "PolyLite ABS",
     "GFB50": "Bambu ABS-GF",
     "GFC00": "Bambu PC",
-    "GFC99": "Generic PC",
-    "GFB98": "Generic ASA",
     "GFB01": "Bambu ASA",
     "GFB61": "PolyLite ASA",
     "GFB02": "Bambu ASA-Aero",
-    "GFS99": "Generic PVA",
     "GFS04": "Bambu PVA",
     "GFS01": "Bambu Support G",
     "GFN03": "Bambu PA-CF",
     "GFN04": "Bambu PAHT-CF",
     "GFS03": "Bambu Support For PA/PET",
     "GFN05": "Bambu PA6-CF",
-    "GFN08": "Bambu PA6-GF",
+    "GFN08": "Bambu PA6-GF"
-    "GFS98": "Generic HIPS",
-    "GFT98": "Generic PPS-CF",
-    "GFT97": "Generic PPS",
-    "GFN97": "Generic PPA-CF",
-    "GFN96": "Generic PPA-GF",
-    "GFP99": "Generic PE",
-    "GFP98": "Generic PE-CF",
-    "GFP97": "Generic PP",
-    "GFP96": "Generic PP-CF",
-    "GFP95": "Generic PP-GF",
-    "GFR99": "Generic EVA",
-    "GFR98": "Generic PHA",
-    "GFS97": "Generic BVOH"
 }

html/header.html

@@ -6,13 +6,24 @@
     <title>FilaMan - Filament Management Tool</title>
     <link rel="icon" type="image/png" href="/favicon.ico">
     <link rel="stylesheet" href="style.css">
+    <script>
+        fetch('/api/version')
+            .then(response => response.json())
+            .then(data => {
+                const versionSpan = document.querySelector('.version');
+                if (versionSpan) {
+                    versionSpan.textContent = 'v' + data.version;
+                }
+            })
+            .catch(error => console.error('Error fetching version:', error));
+    </script>
 </head>
 <body>
     <div class="navbar">
         <div style="display: flex; align-items: center; gap: 2rem;">
             <img src="/logo.png" alt="FilaMan Logo" class="logo">
             <div class="logo-text">
-                <h1>FilaMan<span class="version">v1.2.0</span></h1>
+                <h1>FilaMan<span class="version"></span></h1>
                 <h4>Filament Management Tool</h4>
             </div>
         </div>
@@ -21,7 +32,7 @@
             <a href="/waage">Scale</a>
             <a href="/spoolman">Spoolman/Bambu</a>
             <a href="/about">About</a>
-            <a href="/ota">Upgrade</a>
+            <a href="/upgrade">Upgrade</a>
         </nav>
         <div class="status-container">
             <div class="status-item">

html/index.html

@@ -6,13 +6,24 @@
     <title>FilaMan - Filament Management Tool</title>
     <link rel="icon" type="image/png" href="/favicon.ico">
     <link rel="stylesheet" href="style.css">
+    <script>
+        fetch('/api/version')
+            .then(response => response.json())
+            .then(data => {
+                const versionSpan = document.querySelector('.version');
+                if (versionSpan) {
+                    versionSpan.textContent = 'v' + data.version;
+                }
+            })
+            .catch(error => console.error('Error fetching version:', error));
+    </script>
 </head>
 <body>
     <div class="navbar">
         <div style="display: flex; align-items: center; gap: 2rem;">
             <img src="/logo.png" alt="FilaMan Logo" class="logo">
             <div class="logo-text">
-                <h1>FilaMan<span class="version">v1.2.0</span></h1>
+                <h1>FilaMan<span class="version"></span></h1>
                 <h4>Filament Management Tool</h4>
             </div>
         </div>
@@ -36,7 +47,7 @@
 
 <!-- head -->
 
-    <div class="container">
+    <div class="content">
         <h1>FilaMan</h1>
         <p>Filament Management Tool</p>
         <p>Your smart solution for <strong>Filament Management</strong> in 3D printing.</p>
@@ -44,10 +55,11 @@
         <h2>About FilaMan</h2>
         <p>
             FilaMan is a tool designed to simplify filament spool management. It allows you to identify and weigh filament spools, 
-            automatically sync data with the self-hosted <a href="https://github.com/Donkie/Spoolman" target="_blank">Spoolman</a> platform, 
+            automatically sync data with the self-hosted <a href="https://github.com/Donkie/Spoolman" target="_blank">Spoolman</a> platform.
-            and ensure compatibility with <a href="https://github.com/spuder/OpenSpool" target="_blank">OpenSpool</a> for Bambu printers.
         </p>
 
+        <p>Get more information at <a href="https://www.filaman.app" target="_blank">https://www.filaman.app</a> and <a href="https://github.com/ManuelW77/Filaman" target="_blank">https://github.com/ManuelW77/Filaman</a>.</p>
+
         <div class="features">
             <div class="feature">
                 <h3>Spool Identification</h3>
@@ -62,12 +74,6 @@
                 <p>Works with OpenSpool to recognize and activate spools on Bambu printers.</p>
             </div>
         </div>
-
-        <h2>Future Plans</h2>
-        <p>
-            We are working on expanding compatibility to support smaller NFC tags like NTag213 
-            and developing custom software to enhance the OpenSpool experience.
-        </p>
     </div>
 </body>
 </html>

html/rfid.html

@@ -6,13 +6,24 @@
     <title>FilaMan - Filament Management Tool</title>
     <link rel="icon" type="image/png" href="/favicon.ico">
     <link rel="stylesheet" href="style.css">
+    <script>
+        fetch('/api/version')
+            .then(response => response.json())
+            .then(data => {
+                const versionSpan = document.querySelector('.version');
+                if (versionSpan) {
+                    versionSpan.textContent = 'v' + data.version;
+                }
+            })
+            .catch(error => console.error('Error fetching version:', error));
+    </script>
 </head>
 <body>
     <div class="navbar">
         <div style="display: flex; align-items: center; gap: 2rem;">
             <img src="/logo.png" alt="FilaMan Logo" class="logo">
             <div class="logo-text">
-                <h1>FilaMan<span class="version">v1.2.0</span></h1>
+                <h1>FilaMan<span class="version"></span></h1>
                 <h4>Filament Management Tool</h4>
             </div>
         </div>

html/spoolman.html

@@ -6,13 +6,24 @@
     <title>FilaMan - Filament Management Tool</title>
     <link rel="icon" type="image/png" href="/favicon.ico">
     <link rel="stylesheet" href="style.css">
+    <script>
+        fetch('/api/version')
+            .then(response => response.json())
+            .then(data => {
+                const versionSpan = document.querySelector('.version');
+                if (versionSpan) {
+                    versionSpan.textContent = 'v' + data.version;
+                }
+            })
+            .catch(error => console.error('Error fetching version:', error));
+    </script>
 </head>
 <body>
     <div class="navbar">
         <div style="display: flex; align-items: center; gap: 2rem;">
             <img src="/logo.png" alt="FilaMan Logo" class="logo">
             <div class="logo-text">
-                <h1>FilaMan<span class="version">v1.2.0</span></h1>
+                <h1>FilaMan<span class="version"></span></h1>
                 <h4>Filament Management Tool</h4>
             </div>
         </div>
@@ -63,8 +74,9 @@
             const ip = document.getElementById('bambuIp').value;
             const serial = document.getElementById('bambuSerial').value;
             const code = document.getElementById('bambuCode').value;
+            const autoSend = document.getElementById('autoSend').checked;
 
-            fetch(`/api/bambu?bambu_ip=${encodeURIComponent(ip)}&bambu_serialnr=${encodeURIComponent(serial)}&bambu_accesscode=${encodeURIComponent(code)}`)
+            fetch(`/api/bambu?bambu_ip=${encodeURIComponent(ip)}&bambu_serialnr=${encodeURIComponent(serial)}&bambu_accesscode=${encodeURIComponent(code)}&autoSend=${autoSend}`)
                 .then(response => response.json())
                 .then(data => {
                     if (data.healthy) {
@@ -84,27 +96,42 @@
     
     <div class="content">
         <h1>Spoolman API URL / Bambu Credentials</h1>
-        <label for="spoolmanUrl">Set URL/IP to your Spoolman-Instanz:</label>
-        <input type="text" id="spoolmanUrl" placeholder="http://ip-or-url-of-your-spoolman-instanz:port">
-        <button onclick="checkSpoolmanInstance()">Save Spoolman URL</button>
-        <p id="statusMessage"></p>
 
-        <h2>Bambu Lab Printer Credentials</h2>
+        <div class="card">
-        <div class="bambu-settings">
+            <div class="card-body">
-            <div class="input-group">
+                <h5 class="card-title">Set URL/IP to your Spoolman-Instanz</h5>
-                <label for="bambuIp">Bambu Drucker IP-Adresse:</label>
+                <input type="text" id="spoolmanUrl" placeholder="http://ip-or-url-of-your-spoolman-instanz:port">
-                <input type="text" id="bambuIp" placeholder="192.168.1.xxx" value="{{bambuIp}}">
+                <button onclick="checkSpoolmanInstance()">Save Spoolman URL</button>
+                <p id="statusMessage"></p>
             </div>
-            <div class="input-group">
+        </div>
-                <label for="bambuSerial">Drucker Seriennummer:</label>
+
-                <input type="text" id="bambuSerial" placeholder="BBLXXXXXXXX" value="{{bambuSerial}}">
+        <div class="card">
+            <div class="card-body">
+                <h5 class="card-title">Bambu Lab Printer Credentials</h5>
+                <div class="bambu-settings">
+                    <div class="input-group">
+                        <label for="bambuIp">Bambu Drucker IP-Adresse:</label>
+                        <input type="text" id="bambuIp" placeholder="192.168.1.xxx" value="{{bambuIp}}">
+                    </div>
+                    <div class="input-group">
+                        <label for="bambuSerial">Drucker Seriennummer:</label>
+                        <input type="text" id="bambuSerial" placeholder="BBLXXXXXXXX" value="{{bambuSerial}}">
+                    </div>
+                    <div class="input-group">
+                        <label for="bambuCode">Access Code:</label>
+                        <input type="text" id="bambuCode" placeholder="Access Code vom Drucker" value="{{bambuCode}}">
+                    </div>
+                    <div class="input-group">
+                        If activated, FilaMan will automatically update the next filled tray with the last scanned and weighed spool.
+                        <label for="autoSend">Auto Send to Bambu:</label>
+                        <input type="checkbox" id="autoSend" {{autoSendToBambu}}>
+                    </div>
+
+                    <button onclick="saveBambuCredentials()">Save Bambu Credentials</button>
+                    <p id="bambuStatusMessage"></p>
+                </div>
             </div>
-            <div class="input-group">
-                <label for="bambuCode">Access Code:</label>
-                <input type="text" id="bambuCode" placeholder="Access Code vom Drucker" value="{{bambuCode}}">
-            </div>
-            <button onclick="saveBambuCredentials()">Save Bambu Credentials</button>
-            <p id="bambuStatusMessage"></p>
         </div>
     </div>
 </body>

html/style.css

@@ -279,9 +279,10 @@ a:hover {
 
 /* Karten-Stil für optische Trennung */
 .card {
-    background: #f9f9f9;
+    background: var(--primary-color);
+    width: 500px;
     padding: 15px;
-    margin: 20px 0;
+    margin: 20px auto;
     border-radius: 8px;
     box-shadow: 0 2px 4px rgba(0, 0, 0, 0.1);
 }
@@ -959,7 +960,6 @@ input[type="submit"]:disabled,
 
 /* Bambu Settings Erweiterung */
 .bambu-settings {
-    background: white;
     padding: 20px;
     border-radius: 8px;
     box-shadow: 0 2px 4px rgba(0, 0, 0, 0.1);
@@ -1014,3 +1014,139 @@ input[type="submit"]:disabled,
     vertical-align: middle;
     margin-left: 0.5rem;
 }
+
+.progress-container {
+    width: 100%;
+    margin: 20px 0;
+    display: none;
+    background: #f0f0f0;
+    border-radius: 4px;
+    overflow: hidden;
+}
+.progress-bar {
+    width: 0%;
+    height: 24px;
+    background-color: #4CAF50;
+    text-align: center;
+    line-height: 24px;
+    color: white;
+    transition: width 0.3s ease-in-out;
+    font-weight: bold;
+}
+.status {
+    margin: 10px 0;
+    padding: 15px;
+    border-radius: 4px;
+    display: none;
+}
+.error { 
+    background-color: #ffebee; 
+    color: #c62828; 
+    border: 1px solid #ef9a9a;
+}
+.success { 
+    background-color: #e8f5e9; 
+    color: #2e7d32; 
+    border: 1px solid #a5d6a7;
+}
+.update-form {
+    background: var(--primary-color);
+    box-shadow: 0 4px 8px rgba(0, 0, 0, 0.05);
+    border: var(--glass-border);
+    padding: 20px;
+    border-radius: 8px;
+    margin: 0 auto;
+    width: 400px;
+    text-align: center;
+}
+.update-form input[type="file"] {
+    margin-bottom: 15px;
+    width: 80%;
+    padding: 8px;
+    border: 1px solid #ddd;
+    border-radius: 4px;
+    background-color: #4CAF50;
+}
+.update-form input[type="submit"] {
+    background-color: #4CAF50;
+    color: white;
+    padding: 10px 20px;
+    border: none;
+    border-radius: 4px;
+    cursor: pointer;
+    font-size: 16px;
+    transition: background-color 0.3s;
+}
+.update-form input[type="submit"]:hover {
+    background-color: #45a049;
+}
+.update-form input[type="submit"]:disabled {
+    background-color: #cccccc;
+    cursor: not-allowed;
+}
+.warning {
+    background-color: var(--primary-color);
+    border: 1px solid #ffe0b2;
+    margin: 20px auto;
+    border-radius: 4px;
+    max-width: 600px;
+    text-align: center;
+    color: #e65100;
+    padding: 15px;
+}
+
+.update-options {
+    display: flex;
+    gap: 2rem;
+    margin: 2rem 0;
+}
+.update-section {
+    flex: 1;
+    background: var(--background-green);
+    padding: 1.5rem;
+    border-radius: 8px;
+}
+.update-section h2 {
+    margin-top: 0;
+    color: #333;
+}
+.update-section p {
+    color: #666;
+    margin-bottom: 1rem;
+}
+.progress-container {
+    margin: 20px 0;
+    background: #f0f0f0;
+    border-radius: 4px;
+    overflow: hidden;
+}
+.progress-bar {
+    width: 0;
+    height: 20px;
+    background: #4CAF50;
+    transition: width 0.3s ease-in-out;
+    text-align: center;
+    line-height: 20px;
+    color: white;
+}
+.status {
+    margin-top: 20px;
+    padding: 10px;
+    border-radius: 4px;
+    display: none;
+}
+.status.success {
+    background: #e8f5e9;
+    color: #2e7d32;
+}
+.status.error {
+    background: #ffebee;
+    color: #c62828;
+}
+.warning {
+    background: #fff3e0;
+    color: #e65100;
+    padding: 15px;
+    border-radius: 4px;
+    margin-bottom: 20px;
+}

html/upgrade.html

@@ -0,0 +1,253 @@
+<!-- head --><!DOCTYPE html>
+<html lang="en">
+<head>
+    <meta charset="UTF-8">
+    <meta name="viewport" content="width=device-width, initial-scale=1.0">
+    <title>FilaMan - Filament Management Tool</title>
+    <link rel="icon" type="image/png" href="/favicon.ico">
+    <link rel="stylesheet" href="style.css">
+    <script>
+        fetch('/api/version')
+            .then(response => response.json())
+            .then(data => {
+                const versionSpan = document.querySelector('.version');
+                if (versionSpan) {
+                    versionSpan.textContent = 'v' + data.version;
+                }
+            })
+            .catch(error => console.error('Error fetching version:', error));
+    </script>
+</head>
+<body>
+    <div class="navbar">
+        <div style="display: flex; align-items: center; gap: 2rem;">
+            <img src="/logo.png" alt="FilaMan Logo" class="logo">
+            <div class="logo-text">
+                <h1>FilaMan<span class="version"></span></h1>
+                <h4>Filament Management Tool</h4>
+            </div>
+        </div>
+        <nav style="display: flex; gap: 1rem;">
+            <a href="/">Start</a>
+            <a href="/waage">Scale</a>
+            <a href="/spoolman">Spoolman/Bambu</a>
+            <a href="/about">About</a>
+            <a href="/upgrade">Upgrade</a>
+        </nav>
+        <div class="status-container">
+            <div class="status-item">
+                <span class="status-dot" id="bambuDot"></span>B
+            </div>
+            <div class="status-item">
+                <span class="status-dot" id="spoolmanDot"></span>S
+            </div>
+            <div class="ram-status" id="ramStatus"></div>
+        </div>
+    </div>
+
+<!-- head -->
+    
+    <div class="content">
+        <h1>Firmware Upgrade</h1>
+
+        <div class="warning">
+            <strong>Warning:</strong> Do not power off the device during update.
+        </div>
+
+        <div class="update-options">
+            <div class="update-section">
+                <h2>Firmware Update</h2>
+                <p>Upload a new firmware file (filaman_*.bin)</p>
+                <div class="update-form">
+                    <form id="firmwareForm" enctype='multipart/form-data' data-type="firmware">
+                        <input type='file' name='update' accept='.bin' required>
+                        <input type='submit' value='Start Firmware Update'>
+                    </form>
+                </div>
+            </div>
+
+            <div class="update-section">
+                <h2>Webpage Update</h2>
+                <p>Upload a new webpage file (webpage_*.bin)</p>
+                <div class="update-form">
+                    <form id="webpageForm" enctype='multipart/form-data' data-type="webpage">
+                        <input type='file' name='update' accept='.bin' required>
+                        <input type='submit' value='Start Webpage Update'>
+                    </form>
+                </div>
+            </div>
+        </div>
+
+        <div class="progress-container" style="display: none;">
+            <div class="progress-bar">0%</div>
+        </div>
+        <div class="status"></div>
+    </div>
+
+    <script>
+        // Hide status indicators during update
+        const statusContainer = document.querySelector('.status-container');
+        if (statusContainer) {
+            statusContainer.style.display = 'none';
+        }
+
+        const progress = document.querySelector('.progress-bar');
+        const progressContainer = document.querySelector('.progress-container');
+        const status = document.querySelector('.status');
+        let updateInProgress = false;
+        let lastReceivedProgress = 0;
+
+        // WebSocket Handling
+        let ws = null;
+        let wsReconnectTimer = null;
+
+        function connectWebSocket() {
+            ws = new WebSocket('ws://' + window.location.host + '/ws');
+            
+            ws.onmessage = function(event) {
+                try {
+                    const data = JSON.parse(event.data);
+                    if (data.type === "updateProgress" && updateInProgress) {
+                        // Zeige Fortschrittsbalken
+                        progressContainer.style.display = 'block';
+                        
+                        // Aktualisiere den Fortschritt nur wenn er größer ist
+                        const newProgress = parseInt(data.progress);
+                        if (!isNaN(newProgress) && newProgress >= lastReceivedProgress) {
+                            progress.style.width = newProgress + '%';
+                            progress.textContent = newProgress + '%';
+                            lastReceivedProgress = newProgress;
+                        }
+                        
+                        // Zeige Status-Nachricht
+                        if (data.message || data.status) {
+                            status.textContent = data.message || getStatusMessage(data.status);
+                            status.className = 'status success';
+                            status.style.display = 'block';
+                            
+                            // Starte Reload wenn Update erfolgreich
+                            if (data.status === 'success' || lastReceivedProgress >= 98) {
+                                clearTimeout(wsReconnectTimer);
+                                setTimeout(() => {
+                                    window.location.href = '/';
+                                }, 30000);
+                            }
+                        }
+                    }
+                } catch (e) {
+                    console.error('WebSocket message error:', e);
+                }
+            };
+
+            ws.onclose = function() {
+                if (updateInProgress) {
+                    // Wenn der Fortschritt hoch genug ist, gehen wir von einem erfolgreichen Update aus
+                    if (lastReceivedProgress >= 85) {
+                        status.textContent = "Update appears successful! Device is restarting... Page will reload in 30 seconds.";
+                        status.className = 'status success';
+                        status.style.display = 'block';
+                        clearTimeout(wsReconnectTimer);
+                        setTimeout(() => {
+                            window.location.href = '/';
+                        }, 30000);
+                    } else {
+                        // Versuche Reconnect bei niedrigem Fortschritt
+                        wsReconnectTimer = setTimeout(connectWebSocket, 1000);
+                    }
+                }
+            };
+
+            ws.onerror = function(err) {
+                console.error('WebSocket error:', err);
+                if (updateInProgress && lastReceivedProgress >= 85) {
+                    status.textContent = "Update appears successful! Device is restarting... Page will reload in 30 seconds.";
+                    status.className = 'status success';
+                    status.style.display = 'block';
+                    setTimeout(() => {
+                        window.location.href = '/';
+                    }, 30000);
+                }
+            };
+        }
+
+        // Initial WebSocket connection
+        connectWebSocket();
+
+        function getStatusMessage(status) {
+            switch(status) {
+                case 'starting': return 'Starting update...';
+                case 'uploading': return 'Uploading...';
+                case 'finalizing': return 'Finalizing update...';
+                case 'restoring': return 'Restoring configurations...';
+                case 'preparing': return 'Preparing for restart...';
+                case 'success': return 'Update successful! Device is restarting... Page will reload in 30 seconds.';
+                default: return 'Updating...';
+            }
+        }
+
+        function handleUpdate(e) {
+            e.preventDefault();
+            const form = e.target;
+            const file = form.update.files[0];
+            const updateType = form.dataset.type;
+            
+            if (!file) {
+                alert('Please select a file.');
+                return;
+            }
+            
+            // Validate file name pattern
+            if (updateType === 'firmware' && !file.name.startsWith('upgrade_filaman_firmware_')) {
+                alert('Please select a valid firmware file (upgrade_filaman_firmware_*.bin)');
+                return;
+            }
+            if (updateType === 'webpage' && !file.name.startsWith('upgrade_filaman_website_')) {
+                alert('Please select a valid webpage file (upgrade_filaman_website_*.bin)');
+                return;
+            }
+            
+            // Reset UI
+            updateInProgress = true;
+            progressContainer.style.display = 'block';
+            status.style.display = 'none';
+            status.className = 'status';
+            progress.style.width = '0%';
+            progress.textContent = '0%';
+            
+            // Disable submit buttons
+            document.querySelectorAll('form input[type=submit]').forEach(btn => btn.disabled = true);
+
+            // Send update
+            const xhr = new XMLHttpRequest();
+            xhr.open('POST', '/update', true);
+            
+            xhr.onload = function() {
+                if (xhr.status !== 200 && !progress.textContent.startsWith('100')) {
+                    status.textContent = "Update failed: " + (xhr.responseText || "Unknown error");
+                    status.className = 'status error';
+                    status.style.display = 'block';
+                    updateInProgress = false;
+                    document.querySelectorAll('form input[type=submit]').forEach(btn => btn.disabled = false);
+                }
+            };
+            
+            xhr.onerror = function() {
+                if (!progress.textContent.startsWith('100')) {
+                    status.textContent = "Network error during update";
+                    status.className = 'status error';
+                    status.style.display = 'block';
+                    updateInProgress = false;
+                    document.querySelectorAll('form input[type=submit]').forEach(btn => btn.disabled = false);
+                }
+            };
+
+            const formData = new FormData();
+            formData.append('update', file);
+            xhr.send(formData);
+        }
+
+        document.getElementById('firmwareForm').addEventListener('submit', handleUpdate);
+        document.getElementById('webpageForm').addEventListener('submit', handleUpdate);
+    </script>
+</body>
+</html>

html/waage.html

@@ -6,13 +6,24 @@
     <title>FilaMan - Filament Management Tool</title>
     <link rel="icon" type="image/png" href="/favicon.ico">
     <link rel="stylesheet" href="style.css">
+    <script>
+        fetch('/api/version')
+            .then(response => response.json())
+            .then(data => {
+                const versionSpan = document.querySelector('.version');
+                if (versionSpan) {
+                    versionSpan.textContent = 'v' + data.version;
+                }
+            })
+            .catch(error => console.error('Error fetching version:', error));
+    </script>
 </head>
 <body>
     <div class="navbar">
         <div style="display: flex; align-items: center; gap: 2rem;">
             <img src="/logo.png" alt="FilaMan Logo" class="logo">
             <div class="logo-text">
-                <h1>FilaMan<span class="version">v1.2.0</span></h1>
+                <h1>FilaMan<span class="version"></span></h1>
                 <h4>Filament Management Tool</h4>
             </div>
         </div>

html/wifi.html

@@ -6,13 +6,24 @@
     <title>FilaMan - Filament Management Tool</title>
     <link rel="icon" type="image/png" href="/favicon.ico">
     <link rel="stylesheet" href="style.css">
+    <script>
+        fetch('/api/version')
+            .then(response => response.json())
+            .then(data => {
+                const versionSpan = document.querySelector('.version');
+                if (versionSpan) {
+                    versionSpan.textContent = 'v' + data.version;
+                }
+            })
+            .catch(error => console.error('Error fetching version:', error));
+    </script>
 </head>
 <body>
     <div class="navbar">
         <div style="display: flex; align-items: center; gap: 2rem;">
             <img src="/logo.png" alt="FilaMan Logo" class="logo">
             <div class="logo-text">
-                <h1>FilaMan<span class="version">v1.2.0</span></h1>
+                <h1>FilaMan<span class="version"></span></h1>
                 <h4>Filament Management Tool</h4>
             </div>
         </div>

partitions.csv

@@ -1,5 +1,6 @@
-# Name,   Type, SubType, Offset,   Size,     Flags
+# Name,   Type, SubType,    Offset,   Size,     Flags
-nvs,      data, nvs,     0x9000,   0x5000,
+nvs,      data, nvs,       0x9000,   0x5000,
-otadata,  data, ota,     0xe000,   0x2000,
+otadata,  data, ota,       0xe000,   0x2000,
-app0,     app,  ota_0,   0x10000,  0x280000,
+app0,     app,  ota_0,     0x10000,  0x1E0000,
-spiffs,   data, spiffs,  0x290000, 0x170000,
+app1,     app,  ota_1,     0x1F0000, 0x1E0000,
+spiffs,   data, spiffs,    0x3D0000, 0x30000,

platformio.ini

@@ -9,8 +9,8 @@
 ; https://docs.platformio.org/page/projectconf.html
 
 [common]
-version = "1.2.0"
+version = "1.3.95"
-
+##
 [env:esp32dev]
 platform = espressif32
 board = esp32dev
@@ -19,9 +19,11 @@ monitor_speed = 115200
 
 lib_deps =
     tzapu/WiFiManager @ ^2.0.17
-    #me-no-dev/ESP Async WebServer @ ^1.2.4
     https://github.com/me-no-dev/ESPAsyncWebServer.git#master
-    me-no-dev/AsyncTCP @ ^1.1.1
+    #me-no-dev/AsyncTCP @ ^1.1.1
+    https://github.com/esphome/AsyncTCP.git
+    #mathieucarbou/ESPAsyncWebServer @ ^3.6.0
+    #esp32async/AsyncTCP @ ^3.3.5
     bogde/HX711 @ ^0.7.5
     adafruit/Adafruit SSD1306 @ ^2.5.13
     adafruit/Adafruit GFX Library @ ^1.11.11
@@ -29,16 +31,14 @@ lib_deps =
     bblanchon/ArduinoJson @ ^7.3.0
     knolleary/PubSubClient @ ^2.8
     digitaldragon/SSLClient @ ^1.3.2
-    ipdotsetaf/ESPAsyncHTTPUpdateServer @ ^2.0.0
     
 ; Enable SPIFFS upload
 board_build.filesystem = spiffs
 ; Update partition settings
 board_build.partitions = partitions.csv
 board_upload.flash_size = 4MB
-; Remove these as they're now defined in partitions.csv
+board_build.flash_mode = dio
-; board_build.spiffs.partition = 2M
+board_upload.flash_freq = "40m"
-; board_build.spiffs.upload_size = 2M
 
 build_flags = 
     -Os
@@ -46,19 +46,26 @@ build_flags =
     -fdata-sections
     -DNDEBUG
     -mtext-section-literals
-    '-D VERSION="${common.version}"'
+    -DVERSION=\"${common.version}\"
+    -DASYNCWEBSERVER_REGEX
+    -DCORE_DEBUG_LEVEL=3
+    -DCONFIG_ARDUHAL_LOG_COLORS=1
+    -DOTA_DEBUG=1
+    -DCONFIG_OPTIMIZATION_LEVEL_DEBUG=1
+    -DBOOT_APP_PARTITION_OTA_0=1
+    -DCONFIG_LWIP_TCP_MSL=60000
+    -DCONFIG_LWIP_TCP_RCV_BUF_DEFAULT=4096
+    -DCONFIG_LWIP_MAX_ACTIVE_TCP=16
     
 extra_scripts = 
     scripts/extra_script.py
-    pre:scripts/pre_build.py     ; wird zuerst ausgeführt
+    ${env:buildfs.extra_scripts}
-    pre:scripts/pre_spiffs.py    ; wird als zweites ausgeführt
-    pre:scripts/combine_html.py  ; wird als drittes ausgeführt
-    scripts/gzip_files.py
 
-; Remove or comment out the targets line
+[env:buildfs]
-;targets = buildfs, build
+extra_scripts =
+    pre:scripts/combine_html.py  ; Combine header with HTML files
+    scripts/gzip_files.py       ; Compress files for SPIFFS
 
-; Add a custom target to build both
 [platformio]
 default_envs = esp32dev
 

scripts/pre_spiffs.py

@@ -1,7 +1,39 @@
 Import("env")
 
+board_config = env.BoardConfig()
+
+# Calculate SPIFFS size based on partition table
+SPIFFS_START = 0x310000  # From partitions.csv
+SPIFFS_SIZE = 0xE0000   # From partitions.csv
+SPIFFS_PAGE = 256
+SPIFFS_BLOCK = 4096
+
+env.Replace(
+    MKSPIFFSTOOL="mkspiffs",
+    SPIFFSBLOCKSZ=SPIFFS_BLOCK,
+    SPIFFSBLOCKSIZE=SPIFFS_BLOCK,
+    SPIFFSSTART=SPIFFS_START,
+    SPIFFSEND=SPIFFS_START + SPIFFS_SIZE,
+    SPIFFSPAGESZ=SPIFFS_PAGE,
+    SPIFFSSIZE=SPIFFS_SIZE
+)
+
 # Wiederverwendung der replace_version Funktion
 exec(open("./scripts/pre_build.py").read())
 
 # Bind to SPIFFS build
 env.AddPreAction("buildfs", replace_version)
+
+import os
+import shutil
+from SCons.Script import DefaultEnvironment
+
+env = DefaultEnvironment()
+
+# Format SPIFFS partition before uploading new files
+spiffs_dir = os.path.join(env.subst("$BUILD_DIR"), "spiffs")
+if os.path.exists(spiffs_dir):
+    shutil.rmtree(spiffs_dir)
+os.makedirs(spiffs_dir)
+
+print("SPIFFS partition formatted.")

scripts/update_changelog.py

@@ -64,29 +64,10 @@ def get_changes_from_git():
     
     return changes
 
-def push_changes(version):
-    """Push changes to upstream"""
-    try:
-        # Stage the CHANGELOG.md
-        subprocess.run(['git', 'add', 'CHANGELOG.md'], check=True)
-        
-        # Commit the changelog
-        commit_msg = f"docs: update changelog for version {version}"
-        subprocess.run(['git', 'commit', '-m', commit_msg], check=True)
-        
-        # Push to origin (local)
-        subprocess.run(['git', 'push', 'origin'], check=True)
-        print("Successfully pushed to origin")
-        
-    except subprocess.CalledProcessError as e:
-        print(f"Error during git operations: {e}")
-        return False
-    return True
-
 def update_changelog():
-    print("Starting changelog update...")  # Add this line
+    print("Starting changelog update...")
     version = get_version()
-    print(f"Current version: {version}")   # Add this line
+    print(f"Current version: {version}")
     today = datetime.now().strftime('%Y-%m-%d')
     
     script_dir = os.path.dirname(os.path.abspath(__file__))
@@ -111,7 +92,7 @@ def update_changelog():
     if not os.path.exists(changelog_path):
         with open(changelog_path, 'w') as f:
             f.write(f"# Changelog\n\n{changelog_entry}")
-        push_changes(version)
+        print(f"Created new changelog file with version {version}")
     else:
         with open(changelog_path, 'r') as f:
             content = f.read()
@@ -120,9 +101,30 @@ def update_changelog():
             updated_content = content.replace("# Changelog\n", f"# Changelog\n\n{changelog_entry}")
             with open(changelog_path, 'w') as f:
                 f.write(updated_content)
-            push_changes(version)
+            print(f"Added new version {version} to changelog")
         else:
-            print(f"Version {version} already exists in changelog")
+            # Version existiert bereits, aktualisiere die bestehenden Einträge
+            version_pattern = f"## \\[{version}\\] - \\d{{4}}-\\d{{2}}-\\d{{2}}"
+            next_version_pattern = "## \\[.*?\\] - \\d{4}-\\d{2}-\\d{2}"
+            
+            # Finde den Start der aktuellen Version
+            version_match = re.search(version_pattern, content)
+            if version_match:
+                version_start = version_match.start()
+                # Suche nach der nächsten Version
+                next_version_match = re.search(next_version_pattern, content[version_start + 1:])
+                
+                if next_version_match:
+                    # Ersetze den Inhalt zwischen aktueller und nächster Version
+                    next_version_pos = version_start + 1 + next_version_match.start()
+                    updated_content = content[:version_start] + changelog_entry + content[next_version_pos:]
+                else:
+                    # Wenn keine nächste Version existiert, ersetze bis zum Ende
+                    updated_content = content[:version_start] + changelog_entry + "\n"
+                
+                with open(changelog_path, 'w') as f:
+                    f.write(updated_content)
+                print(f"Updated entries for version {version}")
 
 if __name__ == "__main__":
     update_changelog()

src/api.cpp

@@ -37,9 +37,9 @@ struct SendToApiParams {
     }
 */
 
-JsonDocument fetchSpoolsForWebsite() {
+JsonDocument fetchSingleSpoolInfo(int spoolId) {
     HTTPClient http;
-    String spoolsUrl = spoolmanUrl + apiUrl + "/spool";
+    String spoolsUrl = spoolmanUrl + apiUrl + "/spool/" + spoolId;
 
     Serial.print("Rufe Spool-Daten von: ");
     Serial.println(spoolsUrl);
@@ -56,84 +56,45 @@ JsonDocument fetchSpoolsForWebsite() {
             Serial.print("Fehler beim Parsen der JSON-Antwort: ");
             Serial.println(error.c_str());
         } else {
-            JsonArray spools = doc.as<JsonArray>();
+            String filamentType = doc["filament"]["material"].as<String>();
-            JsonArray filteredSpools = filteredDoc.to<JsonArray>();
+            String filamentBrand = doc["filament"]["vendor"]["name"].as<String>();
 
-            for (JsonObject spool : spools) {
+            int nozzle_temp_min = 0;
-                JsonObject filteredSpool = filteredSpools.createNestedObject();
+            int nozzle_temp_max = 0;
-                filteredSpool["extra"]["nfc_id"] = spool["extra"]["nfc_id"];
+            if (doc["filament"]["extra"]["nozzle_temperature"].is<String>()) {
+                String tempString = doc["filament"]["extra"]["nozzle_temperature"].as<String>();
+                tempString.replace("[", "");
+                tempString.replace("]", "");
+                int commaIndex = tempString.indexOf(',');
                 
-                JsonObject filament = filteredSpool.createNestedObject("filament");
+                if (commaIndex != -1) {
-                filament["sm_id"] = spool["id"];
+                    nozzle_temp_min = tempString.substring(0, commaIndex).toInt();
-                filament["id"] = spool["filament"]["id"];
+                    nozzle_temp_max = tempString.substring(commaIndex + 1).toInt();
-                filament["name"] = spool["filament"]["name"];
+                }
-                filament["material"] = spool["filament"]["material"];
-                filament["color_hex"] = spool["filament"]["color_hex"];
-                filament["nozzle_temperature"] = spool["filament"]["extra"]["nozzle_temperature"]; // [190,230]
-                filament["price_meter"] = spool["filament"]["extra"]["price_meter"];
-                filament["price_gramm"] = spool["filament"]["extra"]["price_gramm"];
-
-                JsonObject vendor = filament.createNestedObject("vendor");
-                vendor["id"] = spool["filament"]["vendor"]["id"];
-                vendor["name"] = spool["filament"]["vendor"]["name"];
             } 
-        }
-    } else {
-        Serial.print("Fehler beim Abrufen der Spool-Daten. HTTP-Code: ");
-        Serial.println(httpCode);
-    }
 
-    http.end();
+            String filamentColor = doc["filament"]["color_hex"].as<String>();
-    return filteredDoc;
+            filamentColor.toUpperCase();
-}
 
-JsonDocument fetchAllSpoolsInfo() {
+            String tray_info_idx = doc["filament"]["extra"]["bambu_idx"].as<String>();
-    HTTPClient http;
+            tray_info_idx.replace("\"", "");
-    String spoolsUrl = spoolmanUrl + apiUrl + "/spool";
             
-    Serial.print("Rufe Spool-Daten von: ");
+            String cali_idx = doc["filament"]["extra"]["bambu_cali_id"].as<String>(); // "\"153\""
-    Serial.println(spoolsUrl);
+            cali_idx.replace("\"", "");
             
-    http.begin(spoolsUrl);
+            String bambu_setting_id = doc["filament"]["extra"]["bambu_setting_id"].as<String>(); // "\"PFUSf40e9953b40d3d\""
-    int httpCode = http.GET();
+            bambu_setting_id.replace("\"", "");
 
-    JsonDocument filteredDoc;
+            doc.clear();
-    if (httpCode == HTTP_CODE_OK) {
-        String payload = http.getString();
-        JsonDocument doc;
-        DeserializationError error = deserializeJson(doc, payload);
-        if (error) {
-            Serial.print("Fehler beim Parsen der JSON-Antwort: ");
-            Serial.println(error.c_str());
-        } else {
-            JsonArray spools = doc.as<JsonArray>();
-            JsonArray filteredSpools = filteredDoc.to<JsonArray>();
 
-            for (JsonObject spool : spools) {
+            filteredDoc["color"] = filamentColor;
-                JsonObject filteredSpool = filteredSpools.createNestedObject();
+            filteredDoc["type"] = filamentType;
-                filteredSpool["price"] = spool["price"];
+            filteredDoc["nozzle_temp_min"] = nozzle_temp_min;
-                filteredSpool["remaining_weight"] = spool["remaining_weight"];
+            filteredDoc["nozzle_temp_max"] = nozzle_temp_max;
-                filteredSpool["used_weight"] = spool["used_weight"];
+            filteredDoc["brand"] = filamentBrand;
-                filteredSpool["extra"]["nfc_id"] = spool["extra"]["nfc_id"];
+            filteredDoc["tray_info_idx"] = tray_info_idx;
-
+            filteredDoc["cali_idx"] = cali_idx;
-                JsonObject filament = filteredSpool.createNestedObject("filament");
+            filteredDoc["bambu_setting_id"] = bambu_setting_id;
-                filament["id"] = spool["filament"]["id"];
-                filament["name"] = spool["filament"]["name"];
-                filament["material"] = spool["filament"]["material"];
-                filament["density"] = spool["filament"]["density"];
-                filament["diameter"] = spool["filament"]["diameter"];
-                filament["spool_weight"] = spool["filament"]["spool_weight"];
-                filament["color_hex"] = spool["filament"]["color_hex"];
-
-                JsonObject vendor = filament.createNestedObject("vendor");
-                vendor["id"] = spool["filament"]["vendor"]["id"];
-                vendor["name"] = spool["filament"]["vendor"]["name"];
-
-                JsonObject extra = filament.createNestedObject("extra");
-                extra["nozzle_temperature"] = spool["filament"]["extra"]["nozzle_temperature"];
-                extra["price_gramm"] = spool["filament"]["extra"]["price_gramm"];
-                extra["price_meter"] = spool["filament"]["extra"]["price_meter"];
-            }
         }
     } else {
         Serial.print("Fehler beim Abrufen der Spool-Daten. HTTP-Code: ");
@@ -175,20 +136,20 @@ void sendToApi(void *parameter) {
     vTaskDelete(NULL);
 }
 
-uint8_t updateSpoolTagId(String uidString, const char* payload) {
+bool updateSpoolTagId(String uidString, const char* payload) {
     JsonDocument doc;
     DeserializationError error = deserializeJson(doc, payload);
     
     if (error) {
         Serial.print("Fehler beim JSON-Parsing: ");
         Serial.println(error.c_str());
-        return 0;
+        return false;
     }
     
     // Überprüfe, ob die erforderlichen Felder vorhanden sind
-    if (!doc.containsKey("sm_id") || doc["sm_id"] == "") {
+    if (!doc["sm_id"].is<String>() || doc["sm_id"].as<String>() == "") {
         Serial.println("Keine Spoolman-ID gefunden.");
-        return 0;
+        return false;
     }
 
     String spoolsUrl = spoolmanUrl + apiUrl + "/spool/" + doc["sm_id"].as<String>();
@@ -207,7 +168,7 @@ uint8_t updateSpoolTagId(String uidString, const char* payload) {
     SendToApiParams* params = new SendToApiParams();
     if (params == nullptr) {
         Serial.println("Fehler: Kann Speicher für Task-Parameter nicht allokieren.");
-        return 0;
+        return false;
     }
     params->httpType = "PATCH";
     params->spoolsUrl = spoolsUrl;
@@ -223,7 +184,7 @@ uint8_t updateSpoolTagId(String uidString, const char* payload) {
         NULL                      // Task-Handle (nicht benötigt)
     );
 
-    return 1;
+    return true;
 }
 
 uint8_t updateSpoolWeight(String spoolId, uint16_t weight) {
@@ -368,7 +329,7 @@ bool checkSpoolmanExtraFields() {
                 for (uint8_t s = 0; s < extraLength; s++) {
                     bool found = false;
                     for (JsonObject field : doc.as<JsonArray>()) {
-                        if (field.containsKey("key") && field["key"] == extraFields[s]) {
+                        if (field["key"].is<String>() && field["key"] == extraFields[s]) {
                             Serial.println("Feld gefunden: " + extraFields[s]);
                             found = true;
                             break;
@@ -430,7 +391,7 @@ bool checkSpoolmanInstance(const String& url) {
             String payload = http.getString();
             JsonDocument doc;
             DeserializationError error = deserializeJson(doc, payload);
-            if (!error && doc.containsKey("status")) {
+            if (!error && doc["status"].is<String>()) {
                 const char* status = doc["status"];
                 http.end();
 
@@ -469,7 +430,7 @@ bool saveSpoolmanUrl(const String& url) {
 
 String loadSpoolmanUrl() {
     JsonDocument doc;
-    if (loadJsonValue("/spoolman_url.json", doc) && doc.containsKey("url")) {
+    if (loadJsonValue("/spoolman_url.json", doc) && doc["url"].is<String>()) {
         return doc["url"].as<String>();
     }
     Serial.println("Keine gültige Spoolman-URL gefunden.");

src/api.h

@@ -14,10 +14,9 @@ bool checkSpoolmanInstance(const String& url);
 bool saveSpoolmanUrl(const String& url);
 String loadSpoolmanUrl(); // Neue Funktion zum Laden der URL
 bool checkSpoolmanExtraFields(); // Neue Funktion zum Überprüfen der Extrafelder
-JsonDocument fetchSpoolsForWebsite(); // API-Funktion für die Webseite
+JsonDocument fetchSingleSpoolInfo(int spoolId); // API-Funktion für die Webseite
-JsonDocument fetchAllSpoolsInfo();
 void sendAmsData(AsyncWebSocketClient *client); // Neue Funktion zum Senden von AMS-Daten
-uint8_t updateSpoolTagId(String uidString, const char* payload); // Neue Funktion zum Aktualisieren eines Spools
+bool updateSpoolTagId(String uidString, const char* payload); // Neue Funktion zum Aktualisieren eines Spools
 uint8_t updateSpoolWeight(String spoolId, uint16_t weight); // Neue Funktion zum Aktualisieren des Gewichts
 bool initSpoolman(); // Neue Funktion zum Initialisieren von Spoolman
 

src/bambu.cpp

@@ -24,13 +24,15 @@ const char* bambu_ip = nullptr;
 const char* bambu_accesscode = nullptr;
 const char* bambu_serialnr = nullptr;
 bool bambu_connected = false;
+bool autoSendToBambu = false;
+int autoSetToBambuSpoolId = 0;
 
 // Globale Variablen für AMS-Daten
 int ams_count = 0;
 String amsJsonData;  // Speichert das fertige JSON für WebSocket-Clients
-AMSData ams_data[MAX_AMS];  // Definition des Arrays
+AMSData ams_data[MAX_AMS];  // Definition des Arrays;
 
-bool saveBambuCredentials(const String& ip, const String& serialnr, const String& accesscode) {
+bool saveBambuCredentials(const String& ip, const String& serialnr, const String& accesscode, bool autoSend) {
     if (BambuMqttTask) {
         vTaskDelete(BambuMqttTask);
     }
@@ -39,6 +41,7 @@ bool saveBambuCredentials(const String& ip, const String& serialnr, const String
     doc["bambu_ip"] = ip;
     doc["bambu_accesscode"] = accesscode;
     doc["bambu_serialnr"] = serialnr;
+    doc["autoSendToBambu"] = autoSend;
 
     if (!saveJsonValue("/bambu_credentials.json", doc)) {
         Serial.println("Fehler beim Speichern der Bambu-Credentials.");
@@ -49,6 +52,7 @@ bool saveBambuCredentials(const String& ip, const String& serialnr, const String
     bambu_ip = ip.c_str();
     bambu_accesscode = accesscode.c_str();
     bambu_serialnr = serialnr.c_str();
+    autoSendToBambu = autoSend;
 
     vTaskDelay(100 / portTICK_PERIOD_MS);
     if (!setupMqtt()) return false;
@@ -58,11 +62,12 @@ bool saveBambuCredentials(const String& ip, const String& serialnr, const String
 
 bool loadBambuCredentials() {
     JsonDocument doc;
-    if (loadJsonValue("/bambu_credentials.json", doc) && doc.containsKey("bambu_ip")) {
+    if (loadJsonValue("/bambu_credentials.json", doc) && doc["bambu_ip"].is<String>()) {
         // Temporäre Strings für die Werte
         String ip = doc["bambu_ip"].as<String>();
         String code = doc["bambu_accesscode"].as<String>();
         String serial = doc["bambu_serialnr"].as<String>();
+        autoSendToBambu = doc["autoSendToBambu"].as<bool>();
 
         ip.trim();
         code.trim();
@@ -81,19 +86,23 @@ bool loadBambuCredentials() {
     return false;
 }
 
-String findFilamentIdx(String brand, String type) {
+struct FilamentResult {
+    String key;
+    String type;
+};
+
+FilamentResult findFilamentIdx(String brand, String type) {
     // JSON-Dokument für die Filament-Daten erstellen
     JsonDocument doc;
     
     // Laden der bambu_filaments.json
     if (!loadJsonValue("/bambu_filaments.json", doc)) {
         Serial.println("Fehler beim Laden der Filament-Daten");
-        return "GFL99"; // Fallback auf Generic PLA
+        return {"GFL99", "PLA"}; // Fallback auf Generic PLA
     }
 
+    // 1. Erst versuchen wir die exakte Brand + Type Kombination zu finden
     String searchKey;
-    
-    // 1. Suche nach Brand + Type Kombination
     if (brand == "Bambu" || brand == "Bambulab") {
         searchKey = "Bambu " + type;
     } else if (brand == "PolyLite") {
@@ -109,20 +118,43 @@ String findFilamentIdx(String brand, String type) {
     // Durchsuche alle Einträge nach der Brand + Type Kombination
     for (JsonPair kv : doc.as<JsonObject>()) {
         if (kv.value().as<String>() == searchKey) {
-            return kv.key().c_str();
+            return {kv.key().c_str(), kv.value().as<String>()};
         }
     }
 
-    // 2. Wenn nicht gefunden, suche nach Generic + Type
+    // 2. Wenn nicht gefunden, zerlege den type String in Wörter und suche nach jedem Wort
-    searchKey = "Generic " + type;
+    // Sammle alle vorhandenen Filamenttypen aus der JSON
+    std::vector<String> knownTypes;
     for (JsonPair kv : doc.as<JsonObject>()) {
-        if (kv.value().as<String>() == searchKey) {
+        String value = kv.value().as<String>();
-            return kv.key().c_str();
+        // Extrahiere den Typ ohne Markennamen
+        if (value.indexOf(" ") != -1) {
+            value = value.substring(value.indexOf(" ") + 1);
+        }
+        if (!value.isEmpty()) {
+            knownTypes.push_back(value);
+        }
+    }
+
+    // Zerlege den Input-Type in Wörter
+    String typeStr = type;
+    typeStr.trim();
+    
+    // Durchsuche für jedes bekannte Filament, ob es im Input vorkommt
+    for (const String& knownType : knownTypes) {
+        if (typeStr.indexOf(knownType) != -1) {
+            // Suche nach diesem Typ in der Original-JSON
+            for (JsonPair kv : doc.as<JsonObject>()) {
+                String value = kv.value().as<String>();
+                if (value.indexOf(knownType) != -1) {
+                    return {kv.key().c_str(), knownType};
+                }
+            }
         }
     }
 
     // 3. Wenn immer noch nichts gefunden, gebe GFL99 zurück (Generic PLA)
-    return "GFL99";
+    return {"GFL99", "PLA"};
 }
 
 bool sendMqttMessage(String payload) {
@@ -156,15 +188,22 @@ bool setBambuSpool(String payload) {
     int minTemp = doc["nozzle_temp_min"];
     int maxTemp = doc["nozzle_temp_max"];
     String type = doc["type"].as<String>();
+    (type == "PLA+") ? type = "PLA" : type;
     String brand = doc["brand"].as<String>();
     String tray_info_idx = (doc["tray_info_idx"].as<String>() != "-1") ? doc["tray_info_idx"].as<String>() : "";
-    if (tray_info_idx == "") tray_info_idx = (brand != "" && type != "") ? findFilamentIdx(brand, type) : "";
+    if (tray_info_idx == "") {
+        if (brand != "" && type != "") {
+            FilamentResult result = findFilamentIdx(brand, type);
+            tray_info_idx = result.key;
+            type = result.type;  // Aktualisiere den type mit dem gefundenen Basistyp
+        }
+    }
     String setting_id = doc["bambu_setting_id"].as<String>();
     String cali_idx = doc["cali_idx"].as<String>();
 
     doc.clear();
 
-    doc["print"]["sequence_id"] = 0;
+    doc["print"]["sequence_id"] = "0";
     doc["print"]["command"] = "ams_filament_setting";
     doc["print"]["ams_id"] = amsId < 200 ? amsId : 255;
     doc["print"]["tray_id"] = trayId < 200 ? trayId : 254;
@@ -172,7 +211,7 @@ bool setBambuSpool(String payload) {
     doc["print"]["nozzle_temp_min"] = minTemp;
     doc["print"]["nozzle_temp_max"] = maxTemp;
     doc["print"]["tray_type"] = type;
-    doc["print"]["cali_idx"] = (cali_idx != "") ? cali_idx : "";
+    //doc["print"]["cali_idx"] = (cali_idx != "") ? cali_idx : "";
     doc["print"]["tray_info_idx"] = tray_info_idx;
     doc["print"]["setting_id"] = setting_id;
     
@@ -194,13 +233,13 @@ bool setBambuSpool(String payload) {
 
     if (cali_idx != "") {
         yield();
-        doc["print"]["sequence_id"] = 0;
+        doc["print"]["sequence_id"] = "0";
         doc["print"]["command"] = "extrusion_cali_sel";
         doc["print"]["filament_id"] = tray_info_idx;
         doc["print"]["nozzle_diameter"] = "0.4";
         doc["print"]["cali_idx"] = cali_idx.toInt();
         doc["print"]["tray_id"] = trayId < 200 ? trayId : 254;
-        doc["print"]["ams_id"] = amsId < 200 ? amsId : 255;
+        //doc["print"]["ams_id"] = amsId < 200 ? amsId : 255;
 
         // Serialize the JSON
         String output;
@@ -218,44 +257,34 @@ bool setBambuSpool(String payload) {
         doc.clear();
         yield();
     }
-/*
-    if (setting_id != "") {
-        yield();
-        doc["print"]["sequence_id"] = 0;
-        doc["print"]["command"] = "ams_filament_setting";
-        doc["print"]["nozzle_temp_min"] = minTemp;
-        doc["print"]["nozzle_temp_max"] = maxTemp;
-        doc["print"]["setting_id"] = setting_id;
-        doc["print"]["tray_color"] = color.length() == 8 ? color : color+"FF";
-        doc["print"]["ams_id"] = amsId < 200 ? amsId : 255;
-        doc["print"]["tray_id"] = trayId < 200 ? trayId : 254;
-        doc["print"]["tray_info_idx"] = tray_info_idx;
-        doc["print"]["tray_type"] = type;
-
-        // Serialize the JSON
-        String output;
-        serializeJson(doc, output);
-
-        if (sendMqttMessage(output)) {
-            Serial.println("Filament Setting successfully set");
-        }
-        else
-        {
-            Serial.println("Failed to set Filament setting");
-            return false;
-        }
-
-        doc.clear();
-        yield();
-    }
-*/
 
     return true;
 }
 
+void autoSetSpool(int spoolId, uint8_t trayId) {
+    // wenn neue spule erkannt und autoSetToBambu > 0
+    JsonDocument spoolInfo = fetchSingleSpoolInfo(spoolId);
+
+    if (!spoolInfo.isNull())
+    {
+        // AMS und TRAY id ergänzen
+        spoolInfo["amsId"] = 0;
+        spoolInfo["trayId"] = trayId;
+
+        Serial.println("Auto set spool");
+        Serial.println(spoolInfo.as<String>());
+
+        setBambuSpool(spoolInfo.as<String>());
+    }
+
+    // id wieder zurücksetzen damit abgeschlossen
+    autoSetToBambuSpoolId = 0;
+}
+
 // init
 void mqtt_callback(char* topic, byte* payload, unsigned int length) {
     String message;
+
     for (int i = 0; i < length; i++) {
         message += (char)payload[i];
     }
@@ -263,16 +292,27 @@ void mqtt_callback(char* topic, byte* payload, unsigned int length) {
     // JSON-Dokument parsen
     JsonDocument doc;
     DeserializationError error = deserializeJson(doc, message);
-    if (error) {
+    if (error) 
+    {
         Serial.print("Fehler beim Parsen des JSON: ");
         Serial.println(error.c_str());
         return;
     }
 
+    // Wenn bambu auto set spool aktiv und eine spule erkannt und mqtt meldung das neue spule im ams
+    if (autoSendToBambu && autoSetToBambuSpoolId > 0 && 
+        doc["print"]["command"].as<String>() == "push_status" && doc["print"]["ams"]["tray_pre"].as<uint8_t>()
+        && !doc["print"]["ams"]["ams"].as<JsonArray>())
+    {
+        autoSetSpool(autoSetToBambuSpoolId, doc["print"]["ams"]["tray_pre"].as<uint8_t>());
+    }
+
     // Prüfen, ob "print->upgrade_state" und "print.ams.ams" existieren
-    if (doc["print"].containsKey("upgrade_state")) {
+    if (doc["print"]["upgrade_state"].is<JsonObject>()) 
+    {
         // Prüfen ob AMS-Daten vorhanden sind
-        if (!doc["print"].containsKey("ams") || !doc["print"]["ams"].containsKey("ams")) {
+        if (!doc["print"]["ams"].is<JsonObject>() || !doc["print"]["ams"]["ams"].is<JsonArray>()) 
+        {
             return;
         }
 
@@ -315,7 +355,7 @@ void mqtt_callback(char* topic, byte* payload, unsigned int length) {
         }
 
         // Prüfe die externe Spule
-        if (!hasChanges && doc["print"].containsKey("vt_tray")) {
+        if (!hasChanges && doc["print"]["vt_tray"].is<JsonObject>()) {
             JsonObject vtTray = doc["print"]["vt_tray"];
             bool foundExternal = false;
             
@@ -363,7 +403,7 @@ void mqtt_callback(char* topic, byte* payload, unsigned int length) {
         ams_count = amsArray.size();
 
         // Wenn externe Spule vorhanden, füge sie hinzu
-        if (doc["print"].containsKey("vt_tray")) {
+        if (doc["print"]["vt_tray"].is<JsonObject>()) {
             JsonObject vtTray = doc["print"]["vt_tray"];
             int extIdx = ams_count;  // Index für externe Spule
             ams_data[extIdx].ams_id = 255;  // Spezielle ID für externe Spule
@@ -374,8 +414,12 @@ void mqtt_callback(char* topic, byte* payload, unsigned int length) {
             ams_data[extIdx].trays[0].tray_color = vtTray["tray_color"].as<String>();
             ams_data[extIdx].trays[0].nozzle_temp_min = vtTray["nozzle_temp_min"].as<int>();
             ams_data[extIdx].trays[0].nozzle_temp_max = vtTray["nozzle_temp_max"].as<int>();
-            ams_data[extIdx].trays[0].setting_id = vtTray["setting_id"].as<String>();
+
-            ams_data[extIdx].trays[0].cali_idx = vtTray["cali_idx"].as<String>();
+            if (doc["print"]["vt_tray"]["tray_type"].as<String>() != "")
+            {
+                ams_data[extIdx].trays[0].setting_id = vtTray["setting_id"].as<String>();
+                ams_data[extIdx].trays[0].cali_idx = vtTray["cali_idx"].as<String>();
+            }
             ams_count++;  // Erhöhe ams_count für die externe Spule
         }
 
@@ -387,14 +431,14 @@ void mqtt_callback(char* topic, byte* payload, unsigned int length) {
         JsonArray wsArray = wsDoc.to<JsonArray>();
 
         for (int i = 0; i < ams_count; i++) {
-            JsonObject amsObj = wsArray.createNestedObject();
+            JsonObject amsObj = wsArray.add<JsonObject>();
             amsObj["ams_id"] = ams_data[i].ams_id;
 
-            JsonArray trays = amsObj.createNestedArray("tray");
+            JsonArray trays = amsObj["tray"].to<JsonArray>();
             int maxTrays = (ams_data[i].ams_id == 255) ? 1 : 4;
             
             for (int j = 0; j < maxTrays; j++) {
-                JsonObject trayObj = trays.createNestedObject();
+                JsonObject trayObj = trays.add<JsonObject>();
                 trayObj["id"] = ams_data[i].trays[j].id;
                 trayObj["tray_info_idx"] = ams_data[i].trays[j].tray_info_idx;
                 trayObj["tray_type"] = ams_data[i].trays[j].tray_type;
@@ -427,14 +471,14 @@ void mqtt_callback(char* topic, byte* payload, unsigned int length) {
                 JsonArray wsArray = wsDoc.to<JsonArray>();
 
                 for (int j = 0; j < ams_count; j++) {
-                    JsonObject amsObj = wsArray.createNestedObject();
+                    JsonObject amsObj = wsArray.add<JsonObject>();
                     amsObj["ams_id"] = ams_data[j].ams_id;
 
-                    JsonArray trays = amsObj.createNestedArray("tray");
+                    JsonArray trays = amsObj["tray"].to<JsonArray>();
                     int maxTrays = (ams_data[j].ams_id == 255) ? 1 : 4;
                     
                     for (int k = 0; k < maxTrays; k++) {
-                        JsonObject trayObj = trays.createNestedObject();
+                        JsonObject trayObj = trays.add<JsonObject>();
                         trayObj["id"] = ams_data[j].trays[k].id;
                         trayObj["tray_info_idx"] = ams_data[j].trays[k].tray_info_idx;
                         trayObj["tray_type"] = ams_data[j].trays[k].tray_type;
@@ -462,7 +506,7 @@ void mqtt_callback(char* topic, byte* payload, unsigned int length) {
 void reconnect() {
     // Loop until we're reconnected
     while (!client.connected()) {
-        Serial.print("Attempting MQTT connection...");
+        Serial.println("Attempting MQTT connection...");
         bambu_connected = false;
         oledShowTopRow();
 

src/bambu.h

@@ -28,12 +28,15 @@ extern bool bambu_connected;
 
 extern int ams_count;
 extern AMSData ams_data[MAX_AMS];
+extern bool autoSendToBambu;
+extern int autoSetToBambuSpoolId;
 
 bool loadBambuCredentials();
-bool saveBambuCredentials(const String& bambu_ip, const String& bambu_serialnr, const String& bambu_accesscode);
+bool saveBambuCredentials(const String& bambu_ip, const String& bambu_serialnr, const String& bambu_accesscode, const bool autoSend);
 bool setupMqtt();
 void mqtt_loop(void * parameter);
 bool setBambuSpool(String payload);
 void bambu_restart();
 
+extern TaskHandle_t BambuMqttTask;
 #endif

src/commonFS.cpp

@@ -1,4 +1,5 @@
 #include "commonFS.h"
+#include <SPIFFS.h>
 
 bool saveJsonValue(const char* filename, const JsonDocument& doc) {
     File file = SPIFFS.open(filename, "w");
@@ -35,23 +36,12 @@ bool loadJsonValue(const char* filename, JsonDocument& doc) {
     return true;
 }
 
-bool initializeSPIFFS() {
+void initializeSPIFFS() {
-    // Erster Versuch
+    if (!SPIFFS.begin(true, "/spiffs", 10, "spiffs")) {
-    if (SPIFFS.begin(true)) {
+        Serial.println("SPIFFS Mount Failed");
-        Serial.println("SPIFFS mounted successfully.");
+        return;
-        return true;
     }
-    
+    Serial.printf("SPIFFS Total: %u bytes\n", SPIFFS.totalBytes());
-    // Formatierung versuchen
+    Serial.printf("SPIFFS Used: %u bytes\n", SPIFFS.usedBytes());
-    Serial.println("Failed to mount SPIFFS. Formatting...");
+    Serial.printf("SPIFFS Free: %u bytes\n", SPIFFS.totalBytes() - SPIFFS.usedBytes());
-    SPIFFS.format();
-    
-    // Zweiter Versuch nach Formatierung
-    if (SPIFFS.begin(true)) {
-        Serial.println("SPIFFS formatted and mounted successfully.");
-        return true;
-    }
-    
-    Serial.println("SPIFFS initialization failed completely.");
-    return false;
 }

src/commonFS.h

@@ -7,6 +7,6 @@
 
 bool saveJsonValue(const char* filename, const JsonDocument& doc);
 bool loadJsonValue(const char* filename, JsonDocument& doc);
-bool initializeSPIFFS();
+void initializeSPIFFS();
 
 #endif

src/config.cpp

@@ -40,6 +40,10 @@ const uint8_t webserverPort = 80;
 const char* apiUrl = "/api/v1";
 // ***** API
 
+// ***** Bambu Auto Set Spool
+uint8_t autoSetBambuAmsCounter = 60;
+// ***** Bambu Auto Set Spool
+
 // ***** Task Prios
 uint8_t rfidTaskCore = 1;
 uint8_t rfidTaskPrio = 1;

src/config.h

@@ -23,6 +23,8 @@ extern const uint8_t OLED_DATA_END;
 extern const char* apiUrl;
 extern const uint8_t webserverPort;
 
+extern uint8_t autoSetBambuAmsCounter;
+
 extern const unsigned char wifi_on[];
 extern const unsigned char wifi_off[];
 extern const unsigned char cloud_on[];

src/display.cpp

@@ -117,7 +117,6 @@ std::vector<String> splitTextIntoLines(String text, uint8_t textSize) {
         lines.push_back(currentLine);
     }
     
-    Serial.println(lines.size());
     return lines;
 }
 

src/main.cpp

@@ -19,6 +19,12 @@
 void setup() {
   Serial.begin(115200);
 
+  uint64_t chipid;
+
+  chipid = ESP.getEfuseMac(); //The chip ID is essentially its MAC address(length: 6 bytes).
+  Serial.printf("ESP32 Chip ID = %04X", (uint16_t)(chipid >> 32)); //print High 2 bytes
+  Serial.printf("%08X\n", (uint32_t)chipid); //print Low 4bytes.
+
   // Initialize SPIFFS
   initializeSPIFFS();
 
@@ -52,7 +58,22 @@ void setup() {
   
   startNfc();
 
-  start_scale();
+  uint8_t scaleCalibrated = start_scale();
+  if (scaleCalibrated == 3) {
+    oledShowMessage("Scale not calibrated!");
+    for (uint16_t i = 0; i < 50000; i++) {
+      yield();
+      vTaskDelay(pdMS_TO_TICKS(1));
+      esp_task_wdt_reset();
+    }
+  } else if (scaleCalibrated == 0) {
+    oledShowMessage("HX711 not found");
+    for (uint16_t i = 0; i < 50000; i++) {
+      yield();
+      vTaskDelay(pdMS_TO_TICKS(1));
+      esp_task_wdt_reset();
+    }
+  }
   
   // WDT initialisieren mit 10 Sekunden Timeout
   bool panic = true; // Wenn true, löst ein WDT-Timeout einen System-Panik aus
@@ -69,6 +90,10 @@ void setup() {
 unsigned long lastWeightReadTime = 0;
 const unsigned long weightReadInterval = 1000; // 1 second
 
+unsigned long lastAutoSetBambuAmsTime = 0;
+const unsigned long autoSetBambuAmsInterval = 1000; // 1 second
+uint8_t autoAmsCounter = 0;
+
 unsigned long lastAmsSendTime = 0;
 const unsigned long amsSendInterval = 60000; // 1 minute
 
@@ -78,30 +103,49 @@ uint8_t wifiErrorCounter = 0;
 
 // ##### PROGRAM START #####
 void loop() {
-  // Überprüfe den WLAN-Status
-  if (WiFi.status() != WL_CONNECTED) {
-    wifiErrorCounter++;
-    wifiOn = false;
-  } else {
-    wifiErrorCounter = 0;
-    wifiOn = true;
-  }
-  if (wifiErrorCounter > 20) ESP.restart();
-
   unsigned long currentMillis = millis();
 
   // Send AMS Data min every Minute
-  if (currentMillis - lastAmsSendTime >= amsSendInterval) {
+  if (currentMillis - lastAmsSendTime >= amsSendInterval) 
+  {
     lastAmsSendTime = currentMillis;
     sendAmsData(nullptr);
   }
 
-  // Ausgabe der Waage auf Display
+  // Wenn Bambu auto set Spool aktiv
-  if (pauseMainTask == 0 && weight != lastWeight && hasReadRfidTag == 0)
+  if (autoSendToBambu && autoSetToBambuSpoolId > 0 && currentMillis - lastAutoSetBambuAmsTime >= autoSetBambuAmsInterval) 
   {
-    (weight < 0) ? oledShowMessage("!! -1") : oledShowWeight(weight);
+    lastAutoSetBambuAmsTime = currentMillis;
+    oledShowMessage("Auto Set         " + String(autoSetBambuAmsCounter - autoAmsCounter) + "s");
+    autoAmsCounter++;
+
+    if (autoAmsCounter >= autoSetBambuAmsCounter) 
+    {
+      autoSetToBambuSpoolId = 0;
+      autoAmsCounter = 0;
+      oledShowWeight(weight);
+    }
   }
   
+
+  // Wenn Waage nicht Kalibriert
+  if (scaleCalibrated == 3) 
+  {
+    oledShowMessage("Scale not calibrated!");
+    vTaskDelay(5000 / portTICK_PERIOD_MS);
+    yield();
+    esp_task_wdt_reset();
+    
+    return;
+  } 
+
+  // Ausgabe der Waage auf Display
+  if (pauseMainTask == 0 && weight != lastWeight && hasReadRfidTag == 0 && (!autoSendToBambu || autoSetToBambuSpoolId == 0))
+  {
+    (weight < 2) ? ((weight < -2) ? oledShowMessage("!! -0") : oledShowWeight(0)) : oledShowWeight(weight);
+  }
+
+
   // Wenn Timer abgelaufen und nicht gerade ein RFID-Tag geschrieben wird
   if (currentMillis - lastWeightReadTime >= weightReadInterval && hasReadRfidTag < 3)
   {
@@ -128,6 +172,7 @@ void loop() {
       weightSend = 0;
     }
   }
+
   // reset weight counter after writing tag
   if (currentMillis - lastWeightReadTime >= weightReadInterval && hasReadRfidTag > 1)
   {
@@ -137,13 +182,14 @@ void loop() {
   lastWeight = weight;
 
   // Wenn ein Tag mit SM id erkannte wurde und der Waage Counter anspricht an SM Senden
-  if (spoolId != "" && weigthCouterToApi > 5 && weightSend == 0 && hasReadRfidTag == 1) {
+  if (spoolId != "" && weigthCouterToApi > 3 && weightSend == 0 && hasReadRfidTag == 1) {
     oledShowIcon("loading");
     if (updateSpoolWeight(spoolId, weight)) 
     {
       oledShowIcon("success");
       vTaskDelay(2000 / portTICK_PERIOD_MS);
       weightSend = 1;
+      autoSetToBambuSpoolId = spoolId.toInt();
     }
     else
     {

src/nfc.cpp

@@ -6,6 +6,7 @@
 #include "website.h"
 #include "api.h"
 #include "esp_task_wdt.h"
+#include "scale.h"
 
 //Adafruit_PN532 nfc(PN532_SCK, PN532_MISO, PN532_MOSI, PN532_SS);
 Adafruit_PN532 nfc(PN532_IRQ, PN532_RESET);
@@ -93,14 +94,6 @@ bool formatNdefTag() {
   }
 
 uint8_t ntag2xx_WriteNDEF(const char *payload) {
-  /*
-  if (!formatNdefTag()) {
-    Serial.println("Fehler beim Formatieren des NDEF-Tags.");
-    hasReadRfidTag = 2;
-    return 0;
-  }
-  */
-
   uint8_t tagSize = 240; // 144 bytes is maximum for NTAG213
   Serial.print("Tag Size: ");Serial.println(tagSize);
 
@@ -137,9 +130,6 @@ uint8_t ntag2xx_WriteNDEF(const char *payload) {
     return 0;
   }
 
-  //Serial.println();
-  //Serial.print("Header Size: ");Serial.println(sizeof(pageHeader));
-
   // Kombiniere Header und Payload
   int totalSize = sizeof(pageHeader) + len;
   uint8_t* combinedData = (uint8_t*) malloc(totalSize);
@@ -149,37 +139,10 @@ uint8_t ntag2xx_WriteNDEF(const char *payload) {
     return 0;
   }
 
-  // Überprüfe die Kombination von Header und Payload
-  /*
-  Serial.print("Header: ");
-  for (int i = 0; i < sizeof(pageHeader); i++) {
-    Serial.print(pageHeader[i], HEX);
-    Serial.print(" ");
-  }
-  Serial.println();
-
-  Serial.print("Payload: ");
-  for (int i = 0; i < len; i++) {
-    Serial.print(payload[i], HEX);
-    Serial.print(" ");
-  }
-  Serial.println();
-  */
-
   // Kombiniere Header und Payload
   memcpy(combinedData, pageHeader, sizeof(pageHeader));
   memcpy(&combinedData[sizeof(pageHeader)], payload, len);
 
-  // Überprüfe die Kombination von Header und Payload
-  /*
-  Serial.print("Kombinierte Daten: ");
-  for (int i = 0; i < totalSize; i++) {
-    Serial.print(combinedData[i], HEX);
-    Serial.print(" ");
-  }
-  Serial.println();
-  */
-
   // Schreibe die Seiten
   uint8_t a = 0;
   uint8_t i = 0;
@@ -188,21 +151,9 @@ uint8_t ntag2xx_WriteNDEF(const char *payload) {
     int bytesToWrite = (totalSize < 4) ? totalSize : 4;
     memcpy(pageBuffer, combinedData + a, bytesToWrite);
 
-    // Überprüfe die Schreibung der Seiten
+    //uint8_t uid[] = { 0, 0, 0, 0, 0, 0, 0 };  // Buffer to store the returned UID
-    /*
+    //uint8_t uidLength;
-    Serial.print("Seite ");
+    //nfc.readPassiveTargetID(PN532_MIFARE_ISO14443A, uid, &uidLength, 100);
-    Serial.print(i);
-    Serial.print(": ");
-    for (int j = 0; j < bytesToWrite; j++) {
-      Serial.print(pageBuffer[j], HEX);
-      Serial.print(" ");
-    }
-    Serial.println();
-    */
-    uint8_t uid[] = { 0, 0, 0, 0, 0, 0, 0 };  // Buffer to store the returned UID
-    uint8_t uidLength;
-    nfc.readPassiveTargetID(PN532_MIFARE_ISO14443A, uid, &uidLength, 500);
-    //Serial.print("Schreibe Seite: ");Serial.println(i);
 
     if (!(nfc.ntag2xx_WritePage(4+i, pageBuffer))) 
     {
@@ -211,8 +162,6 @@ uint8_t ntag2xx_WriteNDEF(const char *payload) {
       return 0;
     }
 
-    //Serial.print("Seite geschrieben: ");Serial.println(i);
-
     yield();
     //esp_task_wdt_reset();
 
@@ -285,11 +234,15 @@ void writeJsonToTag(void *parameter) {
 
   // Gib die erstellte NDEF-Message aus
   Serial.println("Erstelle NDEF-Message...");
+  Serial.println(payload);
+
   hasReadRfidTag = 3;
   vTaskSuspend(RfidReaderTask);
+  vTaskDelay(500 / portTICK_PERIOD_MS);
   //pauseBambuMqttTask = true;
   // aktualisieren der Website wenn sich der Status ändert
   sendNfcData(nullptr);
+  oledShowMessage("Waiting for NFC-Tag");
 
   // Wait 10sec for tag
   uint8_t success = 0;
@@ -326,13 +279,23 @@ void writeJsonToTag(void *parameter) {
         Serial.println("NDEF-Message erfolgreich auf den Tag geschrieben");
         //oledShowMessage("NFC-Tag written");
         oledShowIcon("success");
-        vTaskDelay(2000 / portTICK_PERIOD_MS);
+        vTaskDelay(1000 / portTICK_PERIOD_MS);
         hasReadRfidTag = 5;
         // aktualisieren der Website wenn sich der Status ändert
         sendNfcData(nullptr);
-        vTaskResume(RfidReaderTask);
         pauseBambuMqttTask = false;
-        updateSpoolTagId(uidString, payload);
+        
+        if (updateSpoolTagId(uidString, payload)) {
+          uint8_t uid[] = { 0, 0, 0, 0, 0, 0, 0 };  // Buffer to store the returned UID
+          uint8_t uidLength;
+          oledShowIcon("success");
+          while (nfc.readPassiveTargetID(PN532_MIFARE_ISO14443A, uid, &uidLength, 500)) {
+            yield();
+          }
+        }
+          
+        vTaskResume(RfidReaderTask);
+        vTaskDelay(500 / portTICK_PERIOD_MS);        
     } 
     else 
     {
@@ -362,15 +325,18 @@ void writeJsonToTag(void *parameter) {
 void startWriteJsonToTag(const char* payload) {
   char* payloadCopy = strdup(payload);
   
-  // Erstelle die Task
+  // Task nicht mehrfach starten
-  xTaskCreate(
+  if (hasReadRfidTag != 3) {
-      writeJsonToTag,        // Task-Funktion
+    // Erstelle die Task
-      "WriteJsonToTagTask",       // Task-Name
+    xTaskCreate(
-      4096,                        // Stackgröße in Bytes
+        writeJsonToTag,        // Task-Funktion
-      (void*)payloadCopy,         // Parameter
+        "WriteJsonToTagTask",       // Task-Name
-      rfidWriteTaskPrio,           // Priorität
+        4096,                        // Stackgröße in Bytes
-      NULL                         // Task-Handle (nicht benötigt)
+        (void*)payloadCopy,         // Parameter
-  );
+        rfidWriteTaskPrio,           // Priorität
+        NULL                         // Task-Handle (nicht benötigt)
+    );
+  }
 }
 
 void scanRfidTask(void * parameter) {
@@ -397,7 +363,7 @@ void scanRfidTask(void * parameter) {
         hasReadRfidTag = 6;
 
         oledShowIcon("transfer");
-        vTaskDelay(1000 / portTICK_PERIOD_MS);
+        vTaskDelay(500 / portTICK_PERIOD_MS);
 
         if (uidLength == 7)
         {
@@ -454,7 +420,7 @@ void scanRfidTask(void * parameter) {
         //uidString = "";
         nfcJsonData = "";
         Serial.println("Tag entfernt");
-        oledShowWeight(0);
+        if (!autoSendToBambu) oledShowWeight(weight);
       }
 
       // aktualisieren der Website wenn sich der Status ändert

src/ota.cpp

@@ -1,11 +0,0 @@
-#include <Arduino.h>
-#include "ota.h"
-#include <ESPAsyncWebServer.h>
-#include <ESPAsyncHTTPUpdateServer.h>
-
-ESPAsyncHTTPUpdateServer updateServer;
-
-void setupOTA(AsyncWebServer &server) {
-    updateServer.setup(&server, "/ota", "admin", "admin");
-    //updateServer.setup(&server);
-}

src/ota.h

@@ -1,8 +0,0 @@
-#ifndef OTA_H
-#define OTA_H
-
-#include <ESPAsyncWebServer.h>
-
-void setupOTA(AsyncWebServer &server);
-
-#endif

src/scale.cpp

@@ -3,9 +3,9 @@
 #include <ArduinoJson.h>
 #include "config.h"
 #include "HX711.h"
-#include <EEPROM.h>
 #include "display.h"
 #include "esp_task_wdt.h"
+#include <Preferences.h>
 
 HX711 scale;
 
@@ -16,6 +16,11 @@ int16_t weight = 0;
 uint8_t weigthCouterToApi = 0;
 uint8_t scale_tare_counter = 0;
 uint8_t pauseMainTask = 0;
+uint8_t scaleCalibrated = 1;
+
+Preferences preferences;
+const char* NVS_NAMESPACE = "scale";
+const char* NVS_KEY_CALIBRATION = "cal_value";
 
 // ##### Funktionen für Waage #####
 uint8_t tareScale() {
@@ -46,22 +51,24 @@ void scale_loop(void * parameter) {
   }
 }
 
-void start_scale() {
+uint8_t start_scale() {
   Serial.println("Prüfe Calibration Value");
-  long calibrationValue; // calibration value (see example file "Calibration.ino")
+  long calibrationValue;
-  //calibrationValue = 696.0; // uncomment this if you want to set the calibration value in the sketch
 
-  EEPROM.begin(512);
+  // NVS lesen
-  EEPROM.get(calVal_eepromAdress, calibrationValue); // uncomment this if you want to fetch the calibration value from eeprom
+  preferences.begin(NVS_NAMESPACE, true); // true = readonly
-
+  calibrationValue = preferences.getLong(NVS_KEY_CALIBRATION, defaultScaleCalibrationValue);
-  //calibrationValue = EEPROM.read(calVal_eepromAdress);
+  preferences.end();
 
   Serial.print("Read Scale Calibration Value ");
   Serial.println(calibrationValue);
 
   scale.begin(LOADCELL_DOUT_PIN, LOADCELL_SCK_PIN);
 
-  if (isnan(calibrationValue) || calibrationValue < 1) calibrationValue = defaultScaleCalibrationValue;
+  if (isnan(calibrationValue) || calibrationValue < 1) {
+    calibrationValue = defaultScaleCalibrationValue;
+    scaleCalibrated = 0;
+  }
 
   oledShowMessage("Scale Tare Please remove all");
   for (uint16_t i = 0; i < 2000; i++) {
@@ -94,6 +101,8 @@ void start_scale() {
   } else {
       Serial.println("ScaleLoop-Task erfolgreich erstellt");
   }
+
+  return (scaleCalibrated == 1) ? 1 : 3;
 }
 
 uint8_t calibrate_scale() {
@@ -137,18 +146,19 @@ uint8_t calibrate_scale() {
     {
       Serial.print("New calibration value has been set to: ");
       Serial.println(newCalibrationValue);
-      Serial.print("Save this value to EEPROM adress ");
-      Serial.println(calVal_eepromAdress);
 
-      //EEPROM.put(calVal_eepromAdress, newCalibrationValue);
+      // Speichern mit NVS
-      EEPROM.put(calVal_eepromAdress, newCalibrationValue);
+      preferences.begin(NVS_NAMESPACE, false); // false = readwrite
-      EEPROM.commit();
+      preferences.putLong(NVS_KEY_CALIBRATION, newCalibrationValue);
+      preferences.end();
 
-      EEPROM.get(calVal_eepromAdress, newCalibrationValue);
+      // Verifizieren
-      //newCalibrationValue = EEPROM.read(calVal_eepromAdress);
+      preferences.begin(NVS_NAMESPACE, true);
+      long verifyValue = preferences.getLong(NVS_KEY_CALIBRATION, 0);
+      preferences.end();
 
-      Serial.print("Read Value ");
+      Serial.print("Verified stored value: ");
-      Serial.println(newCalibrationValue);
+      Serial.println(verifyValue);
 
       Serial.println("End calibration, revome weight");
 

src/scale.h

@@ -5,7 +5,7 @@
 #include "HX711.h"
 
 
-void start_scale();
+uint8_t start_scale();
 uint8_t calibrate_scale();
 uint8_t tareScale();
 
@@ -14,5 +14,8 @@ extern int16_t weight;
 extern uint8_t weigthCouterToApi;
 extern uint8_t scale_tare_counter;
 extern uint8_t pauseMainTask;
+extern uint8_t scaleCalibrated;
+
+extern TaskHandle_t ScaleTask;
 
 #endif

src/website.cpp

@@ -7,10 +7,15 @@
 #include "nfc.h"
 #include "scale.h"
 #include "esp_task_wdt.h"
-#include "ota.h"
+#include <Update.h>
+#include "display.h"
+
+#ifndef VERSION
+  #define VERSION "1.1.0"
+#endif
 
 // Cache-Control Header definieren
-#define CACHE_CONTROL "max-age=31536000" // Cache für 1 Jahr
+#define CACHE_CONTROL "max-age=604800" // Cache für 1 Woche
 
 AsyncWebServer server(webserverPort);
 AsyncWebSocket ws("/ws");
@@ -18,6 +23,49 @@ AsyncWebSocket ws("/ws");
 uint8_t lastSuccess = 0;
 uint8_t lastHasReadRfidTag = 0;
 
+// Globale Variablen für Config Backups hinzufügen
+String bambuCredentialsBackup;
+String spoolmanUrlBackup;
+
+// Globale Variable für den Update-Typ
+static int currentUpdateCommand = 0;
+
+// Globale Update-Variablen
+static size_t updateTotalSize = 0;
+static size_t updateWritten = 0;
+static bool isSpiffsUpdate = false;
+
+void sendUpdateProgress(int progress, const char* status = nullptr, const char* message = nullptr) {
+    static int lastSentProgress = -1;
+    
+    // Verhindere zu häufige Updates
+    if (progress == lastSentProgress && !status && !message) {
+        return;
+    }
+    
+    String progressMsg = "{\"type\":\"updateProgress\",\"progress\":" + String(progress);
+    if (status) {
+        progressMsg += ",\"status\":\"" + String(status) + "\"";
+    }
+    if (message) {
+        progressMsg += ",\"message\":\"" + String(message) + "\"";
+    }
+    progressMsg += "}";
+    
+    // Sende die Nachricht mehrmals mit Verzögerung für wichtige Updates
+    if (status || abs(progress - lastSentProgress) >= 10 || progress == 100) {
+        for (int i = 0; i < 2; i++) {
+            ws.textAll(progressMsg);
+            delay(100);  // Längerer Delay zwischen Nachrichten
+        }
+    } else {
+        ws.textAll(progressMsg);
+        delay(50);
+    }
+    
+    lastSentProgress = progress;
+}
+
 void onWsEvent(AsyncWebSocket *server, AsyncWebSocketClient *client, AwsEventType type, void *arg, uint8_t *data, size_t len) {
     if (type == WS_EVT_CONNECT) {
         Serial.println("Neuer Client verbunden!");
@@ -28,6 +76,10 @@ void onWsEvent(AsyncWebSocket *server, AsyncWebSocketClient *client, AwsEventTyp
         sendWriteResult(client, 3);
     } else if (type == WS_EVT_DISCONNECT) {
         Serial.println("Client getrennt.");
+    } else if (type == WS_EVT_ERROR) {
+        Serial.printf("WebSocket Client #%u error(%u): %s\n", client->id(), *((uint16_t*)arg), (char*)data);
+    } else if (type == WS_EVT_PONG) {
+        Serial.printf("WebSocket Client #%u pong\n", client->id());
     } else if (type == WS_EVT_DATA) {
         String message = String((char*)data);
         JsonDocument doc;
@@ -44,7 +96,7 @@ void onWsEvent(AsyncWebSocket *server, AsyncWebSocketClient *client, AwsEventTyp
         }
 
         else if (doc["type"] == "writeNfcTag") {
-            if (doc.containsKey("payload")) {
+            if (doc["payload"].is<JsonObject>()) {
                 // Versuche NFC-Daten zu schreiben
                 String payloadString;
                 serializeJson(doc["payload"], payloadString);
@@ -151,22 +203,130 @@ void sendNfcData(AsyncWebSocketClient *client) {
 
 void sendAmsData(AsyncWebSocketClient *client) {
     if (ams_count > 0) {
-        ws.textAll("{\"type\":\"amsData\", \"payload\":" + amsJsonData + "}");
+        ws.textAll("{\"type\":\"amsData\",\"payload\":" + amsJsonData + "}");
     }
 }
 
+void handleUpdate(AsyncWebServer &server) {
+    AsyncCallbackWebHandler* updateHandler = new AsyncCallbackWebHandler();
+    updateHandler->setUri("/update");
+    updateHandler->setMethod(HTTP_POST);
+    
+    updateHandler->onUpload([](AsyncWebServerRequest *request, String filename,
+                             size_t index, uint8_t *data, size_t len, bool final) {
+        if (!index) {
+            updateTotalSize = request->contentLength();
+            updateWritten = 0;
+            isSpiffsUpdate = (filename.indexOf("website") > -1);
+            
+            if (isSpiffsUpdate) {
+                // Backup vor dem Update
+                sendUpdateProgress(0, "backup", "Backing up configurations...");
+                delay(200);
+                backupJsonConfigs();
+                delay(200);
+                
+                const esp_partition_t *partition = esp_partition_find_first(ESP_PARTITION_TYPE_DATA, ESP_PARTITION_SUBTYPE_DATA_SPIFFS, NULL);
+                if (!partition || !Update.begin(partition->size, U_SPIFFS)) {
+                    request->send(400, "application/json", "{\"success\":false,\"message\":\"Update initialization failed\"}");
+                    return;
+                }
+                sendUpdateProgress(5, "starting", "Starting SPIFFS update...");
+                delay(200);
+            } else {
+                if (!Update.begin(updateTotalSize)) {
+                    request->send(400, "application/json", "{\"success\":false,\"message\":\"Update initialization failed\"}");
+                    return;
+                }
+                sendUpdateProgress(0, "starting", "Starting firmware update...");
+                delay(200);
+            }
+        }
+
+        if (len) {
+            if (Update.write(data, len) != len) {
+                request->send(400, "application/json", "{\"success\":false,\"message\":\"Write failed\"}");
+                return;
+            }
+            
+            updateWritten += len;
+            int currentProgress;
+            
+            // Berechne den Fortschritt basierend auf dem Update-Typ
+            if (isSpiffsUpdate) {
+                // SPIFFS: 5-75% für Upload
+                currentProgress = 5 + (updateWritten * 100) / updateTotalSize;
+            } else {
+                // Firmware: 0-100% für Upload
+                currentProgress = 1 + (updateWritten * 100) / updateTotalSize;
+            }
+            
+            static int lastProgress = -1;
+            if (currentProgress != lastProgress && (currentProgress % 10 == 0 || final)) {
+                sendUpdateProgress(currentProgress, "uploading");
+                oledShowMessage("Update: " + String(currentProgress) + "%");
+                delay(50);
+                lastProgress = currentProgress;
+            }
+        }
+
+        if (final) {
+            if (Update.end(true)) {
+                if (isSpiffsUpdate) {
+                    restoreJsonConfigs();
+                }
+            } else {
+                request->send(400, "application/json", "{\"success\":false,\"message\":\"Update finalization failed\"}");
+            }
+        }
+    });
+
+    updateHandler->onRequest([](AsyncWebServerRequest *request) {
+        if (Update.hasError()) {
+            request->send(400, "application/json", "{\"success\":false,\"message\":\"Update failed\"}");
+            return;
+        }
+
+        // Erste 100% Nachricht
+        ws.textAll("{\"type\":\"updateProgress\",\"progress\":100,\"status\":\"success\",\"message\":\"Update successful! Restarting device...\"}");
+        delay(2000);  // Längerer Delay für die erste Nachricht
+        
+        AsyncWebServerResponse *response = request->beginResponse(200, "application/json", 
+            "{\"success\":true,\"message\":\"Update successful! Restarting device...\"}");
+        response->addHeader("Connection", "close");
+        request->send(response);
+        
+        // Zweite 100% Nachricht zur Sicherheit
+        ws.textAll("{\"type\":\"updateProgress\",\"progress\":100,\"status\":\"success\",\"message\":\"Update successful! Restarting device...\"}");
+        delay(3000);  // Noch längerer Delay vor dem Neustart
+        
+        ESP.restart();
+    });
+
+    server.addHandler(updateHandler);
+}
+
 void setupWebserver(AsyncWebServer &server) {
+    // Deaktiviere alle Debug-Ausgaben
+    Serial.setDebugOutput(false);
+    
+    // WebSocket-Optimierungen
+    ws.onEvent(onWsEvent);
+    ws.enable(true);
+
+    // Konfiguriere Server für große Uploads
+    server.onRequestBody([](AsyncWebServerRequest *request, uint8_t *data, size_t len, size_t index, size_t total){});
+    server.onFileUpload([](AsyncWebServerRequest *request, const String& filename, size_t index, uint8_t *data, size_t len, bool final){});
+
     // Lade die Spoolman-URL beim Booten
     spoolmanUrl = loadSpoolmanUrl();
     Serial.print("Geladene Spoolman-URL: ");
     Serial.println(spoolmanUrl);
 
-    setupOTA(server);
-
     // Route für about
     server.on("/about", HTTP_GET, [](AsyncWebServerRequest *request){
         Serial.println("Anfrage für /about erhalten");
-        AsyncWebServerResponse *response = request->beginResponse(SPIFFS, "/about.html.gz", "text/html");
+        AsyncWebServerResponse *response = request->beginResponse(SPIFFS, "/index.html.gz", "text/html");
         response->addHeader("Content-Encoding", "gzip");
         response->addHeader("Cache-Control", CACHE_CONTROL);
         request->send(response);
@@ -191,17 +351,6 @@ void setupWebserver(AsyncWebServer &server) {
         Serial.println("RFID-Seite gesendet");
     });
 
-    /*
-    // Neue API-Route für das Abrufen der Spool-Daten
-    server.on("/api/spools", HTTP_GET, [](AsyncWebServerRequest *request){
-        Serial.println("API-Aufruf: /api/spools");
-        JsonDocument spoolsData = fetchSpoolsForWebsite();
-        String response;
-        serializeJson(spoolsData, response);
-        request->send(200, "application/json", response);
-    });
-    */
-
     server.on("/api/url", HTTP_GET, [](AsyncWebServerRequest *request){
         Serial.println("API-Aufruf: /api/url");
         String jsonResponse = "{\"spoolman_url\": \"" + String(spoolmanUrl) + "\"}";
@@ -224,10 +373,12 @@ void setupWebserver(AsyncWebServer &server) {
         html.replace("{{spoolmanUrl}}", spoolmanUrl);
 
         JsonDocument doc;
-        if (loadJsonValue("/bambu_credentials.json", doc) && doc.containsKey("bambu_ip")) {
+        if (loadJsonValue("/bambu_credentials.json", doc) && doc["bambu_ip"].is<String>()) 
+        {
             String bambuIp = doc["bambu_ip"].as<String>();
             String bambuSerial = doc["bambu_serialnr"].as<String>();
             String bambuCode = doc["bambu_accesscode"].as<String>();
+            autoSendToBambu = doc["autoSendToBambu"].as<bool>();
             bambuIp.trim();
             bambuSerial.trim();
             bambuCode.trim();
@@ -235,6 +386,14 @@ void setupWebserver(AsyncWebServer &server) {
             html.replace("{{bambuIp}}", bambuIp ? bambuIp : "");            
             html.replace("{{bambuSerial}}", bambuSerial ? bambuSerial : "");
             html.replace("{{bambuCode}}", bambuCode ? bambuCode : "");
+            html.replace("{{autoSendToBambu}}", autoSendToBambu ? "checked" : "");
+        }
+        else
+        {
+            html.replace("{{bambuIp}}", "");
+            html.replace("{{bambuSerial}}", "");
+            html.replace("{{bambuCode}}", "");
+            html.replace("{{autoSendToBambu}}", "");
         }
 
         request->send(200, "text/html", html);
@@ -266,6 +425,8 @@ void setupWebserver(AsyncWebServer &server) {
         String bambu_ip = request->getParam("bambu_ip")->value();
         String bambu_serialnr = request->getParam("bambu_serialnr")->value();
         String bambu_accesscode = request->getParam("bambu_accesscode")->value();
+        bool autoSend = (request->getParam("autoSend")->value() == "true") ? true : false;
+        Serial.println(autoSend);
         bambu_ip.trim();
         bambu_serialnr.trim();
         bambu_accesscode.trim();
@@ -275,7 +436,7 @@ void setupWebserver(AsyncWebServer &server) {
             return;
         }
 
-        bool success = saveBambuCredentials(bambu_ip, bambu_serialnr, bambu_accesscode);
+        bool success = saveBambuCredentials(bambu_ip, bambu_serialnr, bambu_accesscode, autoSend);
 
         request->send(200, "application/json", "{\"healthy\": " + String(success ? "true" : "false") + "}");
     });
@@ -340,6 +501,23 @@ void setupWebserver(AsyncWebServer &server) {
         Serial.println("RFID.js gesendet");
     });
 
+    // Vereinfachter Update-Handler
+    server.on("/upgrade", HTTP_GET, [](AsyncWebServerRequest *request) {
+        AsyncWebServerResponse *response = request->beginResponse(SPIFFS, "/upgrade.html.gz", "text/html");
+        response->addHeader("Content-Encoding", "gzip");
+        response->addHeader("Cache-Control", "no-store");
+        request->send(response);
+    });
+
+    // Update-Handler registrieren
+    handleUpdate(server);
+
+    server.on("/api/version", HTTP_GET, [](AsyncWebServerRequest *request){
+        String fm_version = VERSION;
+        String jsonResponse = "{\"version\": \""+ fm_version +"\"}";
+        request->send(200, "application/json", jsonResponse);
+    });
+
     // Fehlerbehandlung für nicht gefundene Seiten
     server.onNotFound([](AsyncWebServerRequest *request){
         Serial.print("404 - Nicht gefunden: ");
@@ -356,3 +534,50 @@ void setupWebserver(AsyncWebServer &server) {
     server.begin();
     Serial.println("Webserver gestartet");
 }
+
+
+void backupJsonConfigs() {
+    // Bambu Credentials backup
+    if (SPIFFS.exists("/bambu_credentials.json")) {
+        File file = SPIFFS.open("/bambu_credentials.json", "r");
+        if (file) {
+            bambuCredentialsBackup = file.readString();
+            file.close();
+            Serial.println("Bambu credentials backed up");
+        }
+    }
+
+    // Spoolman URL backup
+    if (SPIFFS.exists("/spoolman_url.json")) {
+        File file = SPIFFS.open("/spoolman_url.json", "r");
+        if (file) {
+            spoolmanUrlBackup = file.readString();
+            file.close();
+            Serial.println("Spoolman URL backed up");
+        }
+    }
+}
+
+void restoreJsonConfigs() {
+    // Restore Bambu credentials
+    if (bambuCredentialsBackup.length() > 0) {
+        File file = SPIFFS.open("/bambu_credentials.json", "w");
+        if (file) {
+            file.print(bambuCredentialsBackup);
+            file.close();
+            Serial.println("Bambu credentials restored");
+        }
+        bambuCredentialsBackup = ""; // Clear backup
+    }
+
+    // Restore Spoolman URL
+    if (spoolmanUrlBackup.length() > 0) {
+        File file = SPIFFS.open("/spoolman_url.json", "w");
+        if (file) {
+            file.print(spoolmanUrlBackup);
+            file.close();
+            Serial.println("Spoolman URL restored");
+        }
+        spoolmanUrlBackup = ""; // Clear backup
+    }
+}

src/website.h

@@ -6,8 +6,8 @@
 #include "commonFS.h"
 #include "api.h"
 #include <ArduinoJson.h>
-#include <ESPAsyncWebServer.h>
+#include <Update.h>
-#include <AsyncWebSocket.h>
+#include <AsyncTCP.h>
 #include "bambu.h"
 #include "nfc.h"
 #include "scale.h"
@@ -17,10 +17,20 @@ extern String spoolmanUrl;
 extern AsyncWebServer server;
 extern AsyncWebSocket ws;
 
+// Server-Initialisierung und Handler
+void initWebServer();
+void handleUpload(AsyncWebServerRequest *request, String filename, size_t index, uint8_t *data, size_t len, bool final);
+void handleBody(AsyncWebServerRequest *request, uint8_t *data, size_t len, size_t index, size_t total);
 void setupWebserver(AsyncWebServer &server);
+
+// WebSocket-Funktionen
 void sendAmsData(AsyncWebSocketClient *client);
 void sendNfcData(AsyncWebSocketClient *client);
 void foundNfcTag(AsyncWebSocketClient *client, uint8_t success);
 void sendWriteResult(AsyncWebSocketClient *client, uint8_t success);
 
+// Upgrade-Funktionen
+void backupJsonConfigs();
+void restoreJsonConfigs();
+
 #endif

src/wlan.cpp

@@ -10,9 +10,19 @@ WiFiManager wm;
 bool wm_nonblocking = false;
 
 void initWiFi() {
+    // Optimierte WiFi-Einstellungen
     WiFi.mode(WIFI_STA); // explicitly set mode, esp defaults to STA+AP
+    WiFi.setSleep(false); // disable sleep mode
+    esp_wifi_set_ps(WIFI_PS_NONE);
     
-    esp_wifi_set_max_tx_power(72); // Setze maximale Sendeleistung auf 20dBm
+    // Maximale Sendeleistung
+    WiFi.setTxPower(WIFI_POWER_19_5dBm); // Set maximum transmit power
+  
+    // Optimiere TCP/IP Stack
+    esp_wifi_set_protocol(WIFI_IF_STA, WIFI_PROTOCOL_11B | WIFI_PROTOCOL_11G | WIFI_PROTOCOL_11N);
+    
+    // Aktiviere WiFi-Roaming für bessere Stabilität
+    esp_wifi_set_rssi_threshold(-80);
   
     if(wm_nonblocking) wm.setConfigPortalBlocking(false);
     wm.setConfigPortalTimeout(320); // Portal nach 5min schließen