.github/workflows/gitea-release.yml

@@ -1,208 +0,0 @@
-name: Gitea Release
-
-on:
-  workflow_call:
-    secrets:
-      GITEA_TOKEN:
-        description: 'Token für Gitea API-Zugriff'
-        required: true
-
-    outputs:
-      version:
-        description: 'The version that was released'
-        value: ${{ jobs.create-release.outputs.version }}
-
-jobs:
-  create-release:
-    runs-on: ubuntu-latest
-    outputs:
-      version: ${{ steps.get_version.outputs.VERSION }}
-    steps:
-    - uses: actions/checkout@v4
-      with:
-        fetch-depth: 0
-    
-    - name: Set up Python
-      uses: actions/setup-python@v4
-      with:
-        python-version: '3.x'
-    
-    - name: Install PlatformIO
-      run: |
-        python -m pip install --upgrade pip
-        pip install --upgrade platformio esptool
-    
-    - name: Install xxd
-      run: |
-        sudo apt-get update
-        sudo apt-get install xxd
-    
-    - name: Build Firmware
-      run: |
-        VERSION=$(grep '^version = ' platformio.ini | cut -d'"' -f2)
-        
-        # Build firmware and LittleFS
-        echo "Building firmware and LittleFS..."
-        pio run -e esp32dev
-        pio run -t buildfs
-        
-        # Copy firmware binary
-        cp .pio/build/esp32dev/firmware.bin .pio/build/esp32dev/upgrade_filaman_firmware_v${VERSION}.bin
-        
-        # Create LittleFS binary - direct copy without header
-        cp .pio/build/esp32dev/littlefs.bin .pio/build/esp32dev/upgrade_filaman_website_v${VERSION}.bin
-        
-        # Create full binary
-        (cd .pio/build/esp32dev && 
-        esptool.py --chip esp32 merge_bin \
-          --fill-flash-size 4MB \
-          --flash_mode dio \
-          --flash_freq 40m \
-          --flash_size 4MB \
-          -o filaman_full_${VERSION}.bin \
-          0x1000 bootloader.bin \
-          0x8000 partitions.bin \
-          0x10000 firmware.bin \
-          0x3D0000 littlefs.bin)
-        
-        # Verify file sizes
-        echo "File sizes:"
-        (cd .pio/build/esp32dev && ls -lh *.bin)
-    
-    - name: Get version from platformio.ini
-      id: get_version
-      run: |
-        VERSION=$(grep '^version = ' platformio.ini | cut -d'"' -f2)
-        echo "VERSION=$VERSION" >> $GITHUB_OUTPUT
-      
-    - name: Generate Release Notes
-      id: release_notes
-      run: |
-        # Get the latest tag
-        LATEST_TAG=$(git for-each-ref --sort=-creatordate --format '%(refname:short)' refs/tags | sed -n '2p')
-        
-        if [ -n "$LATEST_TAG" ]; then
-          echo "CHANGES<<EOF" >> $GITHUB_OUTPUT
-          echo "Changes since ${LATEST_TAG}:" >> $GITHUB_OUTPUT
-          echo "" >> $GITHUB_OUTPUT
-          
-          # Get all commits since last release with commit hash and author
-          echo "### Added" >> $GITHUB_OUTPUT
-          git log ${LATEST_TAG}..HEAD --pretty=format:"%h - %s (%an)" | grep -iE '^[a-f0-9]+ - (feat|add|new)' | sed 's/^[a-f0-9]* - feat: /- /' >> $GITHUB_OUTPUT || true
-          echo "" >> $GITHUB_OUTPUT
-          
-          echo "### Fixed" >> $GITHUB_OUTPUT
-          git log ${LATEST_TAG}..HEAD --pretty=format:"%h - %s (%an)" | grep -iE '^[a-f0-9]+ - fix' | sed 's/^[a-f0-9]* - fix: /- /' >> $GITHUB_OUTPUT || true
-          echo "" >> $GITHUB_OUTPUT
-          
-          echo "### Changed" >> $GITHUB_OUTPUT
-          git log ${LATEST_TAG}..HEAD --pretty=format:"%h - %s (%an)" | grep -ivE '^[a-f0-9]+ - (feat|fix|add|new)' | sed 's/^[a-f0-9]* - /- /' >> $GITHUB_OUTPUT || true
-          echo "EOF" >> $GITHUB_OUTPUT
-        else
-          # First release
-          echo "CHANGES<<EOF" >> $GITHUB_OUTPUT
-          echo "Initial Release" >> $GITHUB_OUTPUT
-          echo "" >> $GITHUB_OUTPUT
-          
-          # Add all commits for initial release
-          echo "### Added" >> $GITHUB_OUTPUT
-          git log --pretty=format:"%h - %s (%an)" | grep -iE '^[a-f0-9]+ - (feat|add|new)' | sed 's/^[a-f0-9]* - feat: /- /' >> $GITHUB_OUTPUT || true
-          echo "" >> $GITHUB_OUTPUT
-          
-          echo "### Fixed" >> $GITHUB_OUTPUT
-          git log --pretty=format:"%h - %s (%an)" | grep -iE '^[a-f0-9]+ - fix' | sed 's/^[a-f0-9]* - fix: /- /' >> $GITHUB_OUTPUT || true
-          echo "" >> $GITHUB_OUTPUT
-          
-          echo "### Changed" >> $GITHUB_OUTPUT
-          git log --pretty=format:"%h - %s (%an)" | grep -ivE '^[a-f0-9]+ - (feat|fix|add|new)' | sed 's/^[a-f0-9]* - /- /' >> $GITHUB_OUTPUT || true
-          echo "EOF" >> $GITHUB_OUTPUT
-        fi
-
-    - name: Determine Gitea URL
-      id: gitea_url
-      run: |
-        echo "Debug Environment:"
-        echo "GITHUB_SERVER_URL=${GITHUB_SERVER_URL:-not set}"
-        echo "GITEA_SERVER_URL=${GITEA_SERVER_URL:-not set}"
-        echo "GITHUB_REPOSITORY=${GITHUB_REPOSITORY:-not set}"
-        echo "GITEA_REPOSITORY=${GITEA_REPOSITORY:-not set}"
-        echo "RUNNER_NAME=${RUNNER_NAME:-not set}"
-        
-        # Set API URL based on environment
-        if [ -n "${GITEA_ACTIONS}" ] || [ -n "${GITEA_REPOSITORY}" ] || [[ "${RUNNER_NAME}" == *"gitea"* ]]; then
-          GITEA_API_URL="${GITHUB_SERVER_URL}"
-          GITEA_REPO=$(echo "${GITHUB_REPOSITORY}" | cut -d'/' -f2)
-          GITEA_OWNER=$(echo "${GITHUB_REPOSITORY}" | cut -d'/' -f1)
-        else
-          echo "Error: This workflow is only for Gitea"
-          exit 1
-        fi
-        
-        echo "GITEA_API_URL=${GITEA_API_URL}" >> $GITHUB_OUTPUT
-        echo "GITEA_REPO=${GITEA_REPO}" >> $GITHUB_OUTPUT
-        echo "GITEA_OWNER=${GITEA_OWNER}" >> $GITHUB_OUTPUT
-
-    - name: Create Gitea Release
-      env:
-        GITEA_TOKEN: ${{ secrets.GITEA_TOKEN }}
-        GITEA_API_URL: ${{ steps.gitea_url.outputs.GITEA_API_URL }}
-        GITEA_REPO: ${{ steps.gitea_url.outputs.GITEA_REPO }}
-        GITEA_OWNER: ${{ steps.gitea_url.outputs.GITEA_OWNER }}
-      run: |
-        # Debug Token (nur Länge ausgeben für Sicherheit)
-        echo "Debug: Token length: ${#GITEA_TOKEN}"
-        if [ -z "$GITEA_TOKEN" ]; then
-          echo "Error: GITEA_TOKEN is empty"
-          exit 1
-        fi
-
-        VERSION=${{ steps.get_version.outputs.VERSION }}
-        cd .pio/build/esp32dev
-        
-        # Debug-Ausgaben
-        echo "Debug: API URL: ${GITEA_API_URL}"
-        echo "Debug: Repository: ${GITEA_OWNER}/${GITEA_REPO}"
-        
-        # Erstelle zuerst den Release ohne Dateien
-        echo "Debug: Creating release..."
-        RELEASE_DATA="{\"tag_name\":\"v${VERSION}\",\"name\":\"v${VERSION}\",\"body\":\"${{ steps.release_notes.outputs.CHANGES }}\"}"
-        
-        RELEASE_RESPONSE=$(curl -s -w "\n%{http_code}" \
-          -X POST \
-          -H "Authorization: token ${GITEA_TOKEN}" \
-          -H "Content-Type: application/json" \
-          -d "${RELEASE_DATA}" \
-          "${GITEA_API_URL}/api/v1/repos/${GITEA_OWNER}/${GITEA_REPO}/releases")
-        
-        RELEASE_STATUS=$(echo "$RELEASE_RESPONSE" | tail -n1)
-        RELEASE_BODY=$(echo "$RELEASE_RESPONSE" | head -n -1)
-        
-        if [ "$RELEASE_STATUS" != "201" ]; then
-          echo "Error: Failed to create release"
-          echo "Response: $RELEASE_BODY"
-          exit 1
-        fi
-        
-        # Extrahiere die Release-ID aus der Antwort
-        RELEASE_ID=$(echo "$RELEASE_BODY" | grep -o '"id":[0-9]*' | cut -d':' -f2)
-        
-        # Lade die Dateien einzeln hoch
-        for file in upgrade_filaman_firmware_v${VERSION}.bin upgrade_filaman_website_v${VERSION}.bin filaman_full_${VERSION}.bin; do
-          if [ -f "$file" ]; then
-            echo "Debug: Uploading $file..."
-            UPLOAD_RESPONSE=$(curl -s -w "\n%{http_code}" \
-              -X POST \
-              -H "Authorization: token ${GITEA_TOKEN}" \
-              -H "Content-Type: application/octet-stream" \
-              --data-binary @"$file" \
-              "${GITEA_API_URL}/api/v1/repos/${GITEA_OWNER}/${GITEA_REPO}/releases/${RELEASE_ID}/assets?name=${file}")
-            
-            UPLOAD_STATUS=$(echo "$UPLOAD_RESPONSE" | tail -n1)
-            if [ "$UPLOAD_STATUS" != "201" ]; then
-              echo "Warning: Failed to upload $file"
-              echo "Response: $(echo "$UPLOAD_RESPONSE" | head -n -1)"
-            else
-              echo "Successfully uploaded $file"
-            fi
-          fi
-        done

.github/workflows/github-release.yml

@@ -1,185 +0,0 @@
-name: GitHub Release
-
-on:
-  workflow_call:
-    secrets:
-      RELEASE_TOKEN:
-        description: 'GitHub token for release creation'
-        required: true
-
-permissions:
-  contents: write
-
-jobs:
-  create-release:
-    runs-on: ubuntu-latest
-    permissions:
-      contents: write
-    steps:
-    - uses: actions/checkout@v4
-      with:
-        fetch-depth: 0
-    
-    - name: Set up Python
-      uses: actions/setup-python@v4
-      with:
-        python-version: '3.x'
-    
-    - name: Install PlatformIO
-      run: |
-        python -m pip install --upgrade pip
-        pip install --upgrade platformio esptool
-    
-    - name: Install xxd
-      run: |
-        sudo apt-get update
-        sudo apt-get install xxd
-    
-    - name: Build Firmware
-      run: |
-        VERSION=$(grep '^version = ' platformio.ini | cut -d'"' -f2)
-        
-        # Always build firmware and LittleFS
-        echo "Building firmware and LittleFS..."
-        pio run -e esp32dev
-        pio run -t buildfs
-        
-        # Copy firmware binary
-        cp .pio/build/esp32dev/firmware.bin .pio/build/esp32dev/upgrade_filaman_firmware_v${VERSION}.bin
-        
-        # Create LittleFS binary - direct copy without header
-        cp .pio/build/esp32dev/littlefs.bin .pio/build/esp32dev/upgrade_filaman_website_v${VERSION}.bin
-        
-        # Create full binary (always)
-        (cd .pio/build/esp32dev && 
-        esptool.py --chip esp32 merge_bin \
-          --fill-flash-size 4MB \
-          --flash_mode dio \
-          --flash_freq 40m \
-          --flash_size 4MB \
-          -o filaman_full_${VERSION}.bin \
-          0x1000 bootloader.bin \
-          0x8000 partitions.bin \
-          0x10000 firmware.bin \
-          0x3D0000 littlefs.bin)
-        
-        # Verify file sizes
-        echo "File sizes:"
-        (cd .pio/build/esp32dev && ls -lh *.bin)
-    
-    - name: Get version from platformio.ini
-      id: get_version
-      run: |
-        VERSION=$(grep '^version = ' platformio.ini | cut -d'"' -f2)
-        echo "VERSION=$VERSION" >> $GITHUB_OUTPUT
-      
-    - name: Generate Release Notes
-      id: release_notes
-      run: |
-        # Get the latest tag
-        LATEST_TAG=$(git for-each-ref --sort=-creatordate --format '%(refname:short)' refs/tags | sed -n '2p')
-        
-        if [ -n "$LATEST_TAG" ]; then
-          echo "CHANGES<<EOF" >> $GITHUB_OUTPUT
-          echo "Changes since ${LATEST_TAG}:" >> $GITHUB_OUTPUT
-          echo "" >> $GITHUB_OUTPUT
-          
-          # Get all commits since last release with commit hash and author
-          echo "### Added" >> $GITHUB_OUTPUT
-          git log ${LATEST_TAG}..HEAD --pretty=format:"%h - %s (%an)" | grep -iE '^[a-f0-9]+ - (feat|add|new)' | sed 's/^[a-f0-9]* - feat: /- /' >> $GITHUB_OUTPUT || true
-          echo "" >> $GITHUB_OUTPUT
-          
-          echo "### Fixed" >> $GITHUB_OUTPUT
-          git log ${LATEST_TAG}..HEAD --pretty=format:"%h - %s (%an)" | grep -iE '^[a-f0-9]+ - fix' | sed 's/^[a-f0-9]* - fix: /- /' >> $GITHUB_OUTPUT || true
-          echo "" >> $GITHUB_OUTPUT
-          
-          echo "### Changed" >> $GITHUB_OUTPUT
-          git log ${LATEST_TAG}..HEAD --pretty=format:"%h - %s (%an)" | grep -ivE '^[a-f0-9]+ - (feat|fix|add|new)' | sed 's/^[a-f0-9]* - /- /' >> $GITHUB_OUTPUT || true
-          echo "EOF" >> $GITHUB_OUTPUT
-        else
-          # First release
-          echo "CHANGES<<EOF" >> $GITHUB_OUTPUT
-          echo "Initial Release" >> $GITHUB_OUTPUT
-          echo "" >> $GITHUB_OUTPUT
-          
-          # Add all commits for initial release
-          echo "### Added" >> $GITHUB_OUTPUT
-          git log --pretty=format:"%h - %s (%an)" | grep -iE '^[a-f0-9]+ - (feat|add|new)' | sed 's/^[a-f0-9]* - feat: /- /' >> $GITHUB_OUTPUT || true
-          echo "" >> $GITHUB_OUTPUT
-          
-          echo "### Fixed" >> $GITHUB_OUTPUT
-          git log --pretty=format:"%h - %s (%an)" | grep -iE '^[a-f0-9]+ - fix' | sed 's/^[a-f0-9]* - fix: /- /' >> $GITHUB_OUTPUT || true
-          echo "" >> $GITHUB_OUTPUT
-          
-          echo "### Changed" >> $GITHUB_OUTPUT
-          git log --pretty=format:"%h - %s (%an)" | grep -ivE '^[a-f0-9]+ - (feat|fix|add|new)' | sed 's/^[a-f0-9]* - /- /' >> $GITHUB_OUTPUT || true
-          echo "EOF" >> $GITHUB_OUTPUT
-        fi
-
-    - name: Create GitHub Release
-      env:
-        GH_TOKEN: ${{ secrets.RELEASE_TOKEN }}
-      run: |
-        VERSION=${{ steps.get_version.outputs.VERSION }}
-        cd .pio/build/esp32dev
-        
-        # Create release with available files
-        FILES_TO_UPLOAD=""
-        
-        # Always add firmware
-        if [ -f "upgrade_filaman_firmware_v${VERSION}.bin" ]; then
-          FILES_TO_UPLOAD="$FILES_TO_UPLOAD upgrade_filaman_firmware_v${VERSION}.bin"
-        fi
-        
-        # Add LittleFS and full binary only if they exist
-        if [ -f "upgrade_filaman_website_v${VERSION}.bin" ]; then
-          FILES_TO_UPLOAD="$FILES_TO_UPLOAD upgrade_filaman_website_v${VERSION}.bin"
-        fi
-        
-        if [ -f "filaman_full_${VERSION}.bin" ]; then
-          FILES_TO_UPLOAD="$FILES_TO_UPLOAD filaman_full_${VERSION}.bin"
-        fi
-        
-        # Create release with available files
-        if [ -n "$FILES_TO_UPLOAD" ]; then
-          gh release create "v${VERSION}" \
-            --title "Release ${VERSION}" \
-            --notes "${{ steps.release_notes.outputs.CHANGES }}" \
-            $FILES_TO_UPLOAD
-        else
-          echo "Error: No files found to upload"
-          exit 1
-        fi
-
-    - name: Install lftp
-      run: sudo apt-get install -y lftp
-        
-    - name: Upload Firmware via FTP
-      if: success()
-      env:
-        FTP_PASSWORD: ${{ vars.FTP_PASSWORD }}
-        FTP_USER: ${{ vars.FTP_USER }}
-        FTP_HOST: ${{ vars.FTP_HOST }}
-        VERSION: ${{ steps.get_version.outputs.VERSION }}
-      run: |
-        echo "Environment variables:"
-        env | grep -E '^FTP_' | while read -r line; do
-          var_name=$(echo "$line" | cut -d= -f1)
-          var_value=$(echo "$line" | cut -d= -f2-)
-          echo "$var_name is $(if [ -n "$var_value" ]; then echo "set"; else echo "empty"; fi)"
-        done
-        
-        cd .pio/build/esp32dev
-        if [ -n "$FTP_USER" ] && [ -n "$FTP_PASSWORD" ] && [ -n "$FTP_HOST" ]; then
-          echo "All FTP credentials are present, attempting upload..."
-          lftp -c "set ssl:verify-certificate no; \
-                    set ftp:ssl-protect-data true; \
-                    set ftp:ssl-force true; \
-                    set ssl:check-hostname false; \
-                    set ftp:ssl-auth TLS; \
-                    open -u $FTP_USER,$FTP_PASSWORD $FTP_HOST; \
-                    put -O / filaman_full_${VERSION}.bin -o filaman_full.bin"
-        else
-          echo "Error: Some FTP credentials are missing"
-          exit 1
-        fi

.github/workflows/providers/gitea-release.yml

@@ -0,0 +1,119 @@
+name: Gitea Release
+
+on:
+  workflow_call:
+    inputs:
+      gitea_ref_name:
+        required: true
+        type: string
+      gitea_server_url:
+        required: true
+        type: string
+      gitea_repository:
+        required: true
+        type: string
+    secrets:
+      GITEA_TOKEN:
+        required: true
+
+jobs:
+  create-release:
+    runs-on: ubuntu-latest
+    steps:
+    - uses: actions/checkout@v4
+    
+    - name: Set up Python
+      uses: actions/setup-python@v4
+      with:
+        python-version: '3.x'
+    
+    - name: Install PlatformIO
+      run: |
+        python -m pip install --upgrade pip
+        pip install --upgrade platformio esptool
+    
+    - name: Install xxd
+      run: |
+        sudo apt-get update
+        sudo apt-get install xxd
+    
+    - name: Build Firmware
+      run: |
+        pio run -e esp32dev_ota -t buildfs  # Build SPIFFS
+        pio run -e esp32dev_ota            # Build firmware
+        cp .pio/build/esp32dev_ota/firmware.bin .pio/build/esp32dev_ota/filaman.bin
+        cp .pio/build/esp32dev_ota/spiffs.bin .pio/build/esp32dev_ota/filaman_spiffs.bin
+        
+    - name: Prepare binaries
+      run: |
+        cd .pio/build/esp32dev_ota
+        
+        # Create OTA binary (already has correct magic byte)
+        cp firmware.bin filaman_ota.bin
+        
+        # Create a magic byte prepended binary for the bootloader
+        echo -ne '\xE9' > bootloader_with_magic.bin
+        cat bootloader.bin >> bootloader_with_magic.bin
+        
+        echo "Creating full binary with magic byte..."
+        esptool.py --chip esp32 merge_bin \
+          --fill-flash-size 4MB \
+          --flash_mode dio \
+          --flash_freq 40m \
+          --flash_size 4MB \
+          -o filaman_full.bin \
+          0x0000 bootloader_with_magic.bin \
+          0x8000 partitions.bin \
+          0x10000 firmware.bin \
+          0x390000 spiffs.bin
+        
+        # Verify magic bytes
+        echo "Checking magic bytes:"
+        echo "Full binary first bytes:"
+        xxd -l 16 filaman_full.bin
+        
+        # Verify file sizes
+        echo "File sizes:"
+        ls -lh *.bin
+        
+    - name: Create Release
+      env:
+        TOKEN: ${{ secrets.GITEA_TOKEN }}
+      run: |
+        TAG="${{ inputs.gitea_ref_name }}"
+        API_URL="${{ inputs.gitea_server_url }}/api/v1"
+        REPO="${{ inputs.gitea_repository }}"
+        
+        # Create release
+        RESPONSE=$(curl -k -s \
+          -X POST \
+          -H "Authorization: token ${TOKEN}" \
+          -H "Content-Type: application/json" \
+          -d "{
+            \"tag_name\":\"${TAG}\",
+            \"name\":\"Release ${TAG}\",
+            \"body\":\"${{ steps.changelog.outputs.CHANGES }}\"
+          }" \
+          "${API_URL}/repos/${REPO}/releases")
+        
+        RELEASE_ID=$(echo "$RESPONSE" | grep -o '"id":[0-9]*' | cut -d':' -f2 | head -n1)
+        
+        if [ -n "$RELEASE_ID" ]; then
+          echo "Release created with ID: $RELEASE_ID"
+          
+          # Upload binaries
+          cd .pio/build/esp32dev_ota
+          for file in filaman_full.bin; do
+            echo "Uploading $file..."
+            curl -k -s \
+              -X POST \
+              -H "Authorization: token ${TOKEN}" \
+              -H "Content-Type: application/octet-stream" \
+              --data-binary "@$file" \
+              "${API_URL}/repos/${REPO}/releases/${RELEASE_ID}/assets?name=$file"
+          done
+        else
+          echo "Failed to create release. Response:"
+          echo "$RESPONSE"
+          exit 1
+        fi

.github/workflows/providers/github-release.yml

@@ -0,0 +1,89 @@
+name: GitHub Release
+
+on:
+  workflow_call:
+
+jobs:
+  create-release:
+    runs-on: ubuntu-latest
+    permissions:
+      contents: write
+    steps:
+    - uses: actions/checkout@v4
+    
+    - name: Set up Python
+      uses: actions/setup-python@v4
+      with:
+        python-version: '3.x'
+    
+    - name: Install PlatformIO
+      run: |
+        python -m pip install --upgrade pip
+        pip install --upgrade platformio esptool
+    
+    - name: Install xxd
+      run: |
+        sudo apt-get update
+        sudo apt-get install xxd
+    
+    - name: Build Firmware
+      run: |
+        pio run -e esp32dev_ota -t buildfs  # Build SPIFFS
+        pio run -e esp32dev_ota            # Build firmware
+        cp .pio/build/esp32dev_ota/firmware.bin .pio/build/esp32dev_ota/filaman.bin
+        cp .pio/build/esp32dev_ota/spiffs.bin .pio/build/esp32dev_ota/filaman_spiffs.bin
+        
+    - name: Prepare binaries
+      run: |
+        cd .pio/build/esp32dev_ota
+        
+        # Create OTA binary (already has correct magic byte)
+        cp firmware.bin filaman_ota.bin
+        
+        # Create a magic byte prepended binary for the bootloader
+        echo -ne '\xE9' > bootloader_with_magic.bin
+        cat bootloader.bin >> bootloader_with_magic.bin
+        
+        echo "Creating full binary with magic byte..."
+        esptool.py --chip esp32 merge_bin \
+          --fill-flash-size 4MB \
+          --flash_mode dio \
+          --flash_freq 40m \
+          --flash_size 4MB \
+          -o filaman_full.bin \
+          0x0000 bootloader_with_magic.bin \
+          0x8000 partitions.bin \
+          0x10000 firmware.bin \
+          0x390000 spiffs.bin
+        
+        # Verify magic bytes
+        echo "Checking magic bytes:"
+        echo "Full binary first bytes:"
+        xxd -l 16 filaman_full.bin
+        
+        # Verify file sizes
+        echo "File sizes:"
+        ls -lh *.bin
+    
+    - name: Get version from tag
+      id: get_version
+      run: |
+        echo "VERSION=${GITHUB_REF#refs/tags/v}" >> $GITHUB_OUTPUT
+      
+    - name: Read CHANGELOG.md
+      id: changelog
+      run: |
+        VERSION=${{ steps.get_version.outputs.VERSION }}
+        CHANGELOG=$(awk "/## \\[$VERSION\\]/{p=1;print;next} /## \\[/{p=0} p" CHANGELOG.md)
+        echo "CHANGES<<EOF" >> $GITHUB_OUTPUT
+        echo "$CHANGELOG" >> $GITHUB_OUTPUT
+        echo "EOF" >> $GITHUB_OUTPUT
+
+    - name: Create GitHub Release
+      env:
+        GH_TOKEN: ${{ github.token }}
+      run: |
+        gh release create "${{ github.ref_name }}" \
+          --title "Release ${{ steps.get_version.outputs.VERSION }}" \
+          --notes "${{ steps.changelog.outputs.CHANGES }}" \
+          .pio/build/esp32dev_ota/filaman_full.bin

.github/workflows/release.yml

@@ -5,37 +5,66 @@ on:
     tags:
       - 'v*'
 
-permissions:
-  contents: write
-
 jobs:
-  detect-provider:
+  route:
     runs-on: ubuntu-latest
     outputs:
       provider: ${{ steps.provider.outputs.provider }}
+      gitea_ref_name: ${{ steps.provider.outputs.gitea_ref_name }}
+      gitea_server_url: ${{ steps.provider.outputs.gitea_server_url }}
+      gitea_repository: ${{ steps.provider.outputs.gitea_repository }}
     steps:
+      - name: Checkout Repository
+        uses: actions/checkout@v3
+
+      - name: Debug Environment
+        run: |
+          echo "CI Environment Details:"
+          echo "GITHUB_ACTIONS=${GITHUB_ACTIONS:-not set}"
+          echo "GITEA_ACTIONS=${GITEA_ACTIONS:-not set}"
+          echo "GITEA_REPOSITORY=${GITEA_REPOSITORY:-not set}"
+          echo "GITEA_SERVER_URL=${GITEA_SERVER_URL:-not set}"
+          echo "RUNNER_NAME=${RUNNER_NAME:-not set}"
+
       - name: Determine CI Provider
         id: provider
         shell: bash
         run: |
           if [ -n "${GITEA_ACTIONS}" ] || [ -n "${GITEA_REPOSITORY}" ] || [[ "${RUNNER_NAME}" == *"gitea"* ]]; then
             echo "provider=gitea" >> "$GITHUB_OUTPUT"
-          else
+            echo "gitea_ref_name=${GITHUB_REF_NAME}" >> "$GITHUB_OUTPUT"
+            echo "gitea_server_url=${GITHUB_SERVER_URL}" >> "$GITHUB_OUTPUT"
+            echo "gitea_repository=${GITHUB_REPOSITORY}" >> "$GITHUB_OUTPUT"
+          elif [ "${GITHUB_ACTIONS}" = "true" ]; then
             echo "provider=github" >> "$GITHUB_OUTPUT"
+          else
+            echo "provider=unknown" >> "$GITHUB_OUTPUT"
+          fi
+
+  verify-provider:
+    needs: route
+    runs-on: ubuntu-latest
+    steps:
+      - name: Echo detected provider
+        run: |
+          echo "Detected CI Provider: ${{ needs.route.outputs.provider }}"
+          if [ "${{ needs.route.outputs.provider }}" = "unknown" ]; then
+            echo "::error::Failed to detect CI provider!"
+            exit 1
           fi
 
   github-release:
-    needs: detect-provider
+    needs: [route, verify-provider]
-    permissions:
+    if: needs.route.outputs.provider == 'github'
-      contents: write
+    uses: ./.github/workflows/providers/github-release.yml
-    if: needs.detect-provider.outputs.provider == 'github'
-    uses: ./.github/workflows/github-release.yml
-    secrets:
-      RELEASE_TOKEN: ${{ secrets.GITHUB_TOKEN }}
 
   gitea-release:
-    needs: detect-provider
+    needs: [route, verify-provider]
-    if: needs.detect-provider.outputs.provider == 'gitea'
+    if: needs.route.outputs.provider == 'gitea'
-    uses: ./.github/workflows/gitea-release.yml
+    uses: ./.github/workflows/providers/gitea-release.yml
+    with:
+      gitea_ref_name: ${{ needs.route.outputs.gitea_ref_name }}
+      gitea_server_url: ${{ needs.route.outputs.gitea_server_url }}
+      gitea_repository: ${{ needs.route.outputs.gitea_repository }}
     secrets:
       GITEA_TOKEN: ${{ secrets.GITEA_TOKEN }}

.vscode/settings.json

@@ -0,0 +1,54 @@
+{
+    "files.associations": {
+        "algorithm": "cpp",
+        "vector": "cpp",
+        "cmath": "cpp",
+        "array": "cpp",
+        "atomic": "cpp",
+        "*.tcc": "cpp",
+        "bitset": "cpp",
+        "cctype": "cpp",
+        "clocale": "cpp",
+        "cstdarg": "cpp",
+        "cstddef": "cpp",
+        "cstdint": "cpp",
+        "cstdio": "cpp",
+        "cstdlib": "cpp",
+        "cstring": "cpp",
+        "ctime": "cpp",
+        "cwchar": "cpp",
+        "cwctype": "cpp",
+        "deque": "cpp",
+        "unordered_map": "cpp",
+        "unordered_set": "cpp",
+        "exception": "cpp",
+        "functional": "cpp",
+        "iterator": "cpp",
+        "map": "cpp",
+        "memory": "cpp",
+        "memory_resource": "cpp",
+        "numeric": "cpp",
+        "optional": "cpp",
+        "random": "cpp",
+        "regex": "cpp",
+        "string": "cpp",
+        "string_view": "cpp",
+        "system_error": "cpp",
+        "tuple": "cpp",
+        "type_traits": "cpp",
+        "utility": "cpp",
+        "fstream": "cpp",
+        "initializer_list": "cpp",
+        "iomanip": "cpp",
+        "iosfwd": "cpp",
+        "istream": "cpp",
+        "limits": "cpp",
+        "new": "cpp",
+        "ostream": "cpp",
+        "sstream": "cpp",
+        "stdexcept": "cpp",
+        "streambuf": "cpp",
+        "cinttypes": "cpp",
+        "typeinfo": "cpp"
+    }
+}

CHANGELOG.md

@@ -1,892 +1,5 @@
 # Changelog
 
-## [1.4.0] - 2025-03-01
-### Added
-- add support for Spoolman Octoprint Plugin in README files
-- add OctoPrint integration with configurable fields and update functionality
-- add version comparison function and check for outdated versions before updates
-- remove unused version and protocol fields from JSON output; add error message for insufficient memory
-
-### Changed
-- update NFC tag references to include NTAG213 and clarify storage capacity
-- bump version to 1.4.0
-- remove unused version and protocol fields from NFC data packet
-- sort vendors alphabetically in the dropdown list
-- Merge pull request #10 from janecker/nfc-improvements
-- Improves NFC Tag handling
-
-
-## [1.3.99] - 2025-02-28
-### Changed
-- update platformio.ini for version v1.3.99
-- update workflows to build firmware with LittleFS instead of SPIFFS
-
-
-## [1.3.98] - 2025-02-28
-### Changed
-- update platformio.ini for version v1.3.98
-- migrate from SPIFFS to LittleFS for file handling
-- remove unused VSCode settings file
-- remove commented-out spoolman and filaman data from api.cpp
-
-
-## [1.3.97] - 2025-02-28
-### Added
-- füge Bestätigungsmeldung für Spool-Einstellung hinzu
-- verbessere WLAN-Konfiguration und füge mDNS-Unterstützung hinzu
-- aktualisiere OLED-Anzeige mit Versionsnummer und verbessere Textausrichtung
-- füge regelmäßige WLAN-Verbindungsüberprüfung hinzu
-- aktualisiere Schaltplan-Bild
-- zeige Versionsnummer im OLED-Display an
-
-### Changed
-- update platformio.ini for version v1.3.97
-- entferne text-shadow von deaktivierten Schaltflächen
-- füge Link zum Wiki für detaillierte Informationen über die Nutzung hinzu
-
-### Fixed
-- Speichernutzung optimiert
-- behebe doppelte http.end() Aufrufe in checkSpoolmanExtraFields
-- optimiere Verzögerungen und Stackgrößen in NFC-Task-Funktionen
-- entferne ungenutzte Bibliotheken und Debug-Ausgaben aus main.cpp
-
-
-## [1.3.96] - 2025-02-25
-### Added
-- füge Unterstützung für Spoolman-Einstellungen hinzu und aktualisiere die Benutzeroberfläche
-- entferne die sendAmsData-Funktion aus der API-Schnittstelle
-- erweitere Bambu-Credentials um AutoSend-Zeit und aktualisiere die Benutzeroberfläche
-- erweitere Bambu-Credentials mit AutoSend-Wartezeit und aktualisiere die Benutzeroberfläche
-- add espRestart function and replace delay with vTaskDelay for OTA update process
-- implement OTA update functionality with backup and restore for configurations
-- add own_filaments.json and integrate custom filament loading in bambu.cpp
-
-### Changed
-- update platformio.ini for version v1.3.96
-
-### Fixed
-- aktualisiere Bedingungen für die AMS-Datenaktualisierung und entferne unnötige Aufrufe
-- aktualisiere Bedingung für den Fortschritt der OTA-Update-Nachricht
-- update auto set logic to check RFID tag before setting Bambu spool
-
-
-## [1.3.95] - 2025-02-24
-### Changed
-- update webpages for version v1.3.95
-
-### Fixed
-- bind autoSendToBambu variable to checkbox in spoolman.html
-
-
-## [1.3.94] - 2025-02-24
-### Changed
-- update webpages for version v1.3.94
-
-### Fixed
-- correct payload type check in NFC write event handling
-
-
-## [1.3.93] - 2025-02-24
-### Added
-- implement auto send feature for Bambu spool management and update related configurations
-- add debug mode instructions for Spoolman in README
-- add wiring diagrams to README for PN532 I2C setup
-
-### Changed
-- update webpages for version v1.3.93
-- simplify filament names in JSON configuration
-- update findFilamentIdx to return structured result and improve type searching logic
-- update README to reflect PN532 I2C configuration and remove SPI pin details
-
-### Fixed
-- remove debug output from splitTextIntoLines and update weight display logic in scanRfidTask
-- enhance weight display logic for negative values
-- remove unnecessary CPU frequency configuration from setup function
-
-
-## [1.3.92] - 2025-02-24
-### Changed
-- update webpages for version v1.3.92
-- remove commented-out code in setBambuSpool function
-- update installation instructions and formatting in README files
-
-### Fixed
-- configure CPU frequency settings in setup function only for testing
-- update comment to clarify NVS reading process
-- adjust weight display logic to handle cases for weight less than 2
-- update weight display logic to handle negative and specific weight cases
-
-
-## [1.3.91] - 2025-02-23
-### Added
-- update GitHub Actions workflow for FTP firmware upload with improved credential checks
-
-### Changed
-- update webpages for version v1.3.91
-
-
-## [1.3.90] - 2025-02-23
-### Added
-- update index.html for improved content structure and additional links
-- improve UI for Spoolman and Bambu Lab printer credentials, enhancing layout and styling
-- update README files with HSPI default PINs and add ESP32 pin diagram
-- implement scale calibration checks and update start_scale function to return calibration status
-- add FTP upload functionality to GitHub release workflow and update installation instructions in README
-
-### Changed
-- update webpages for version v1.3.90
-
-### Fixed
-- remove debug secrets check from Gitea release workflow
-
-
-## [1.3.89] - 2025-02-23
-### Changed
-- update webpages for version v1.3.89
-
-### Fixed
-- update Gitea release workflow to use vars for FTP credentials
-
-
-## [1.3.88] - 2025-02-23
-### Changed
-- update webpages for version v1.3.88
-
-### Fixed
-- update Gitea release workflow to use secrets for FTP credentials
-
-
-## [1.3.87] - 2025-02-23
-### Changed
-- update webpages for version v1.3.87
-
-### Fixed
-- enhance FTP upload workflow with credential checks and version output
-
-
-## [1.3.86] - 2025-02-23
-### Changed
-- update webpages for version v1.3.86
-
-### Fixed
-- streamline FTP credentials usage in Gitea release workflow
-
-
-## [1.3.85] - 2025-02-23
-### Added
-- add FTP_USER variable for Gitea release workflow
-
-### Changed
-- update webpages for version v1.3.85
-
-
-## [1.3.84] - 2025-02-23
-### Added
-- add FTP_HOST variable for firmware upload in Gitea release workflow
-
-### Changed
-- update webpages for version v1.3.84
-
-
-## [1.3.83] - 2025-02-23
-### Changed
-- update webpages for version v1.3.83
-
-### Fixed
-- correct variable interpolation for FTP credentials in Gitea release workflow
-
-
-## [1.3.82] - 2025-02-23
-### Added
-- update Gitea release workflow to use variable interpolation for FTP credentials
-
-### Changed
-- update webpages for version v1.3.82
-
-
-## [1.3.81] - 2025-02-23
-### Added
-- update Gitea release workflow to use environment variables for FTP credentials and version
-
-### Changed
-- update webpages for version v1.3.81
-
-
-## [1.3.80] - 2025-02-23
-### Added
-- add FTP_USER and FTP_PASSWORD secrets for firmware upload in Gitea release workflow
-
-### Changed
-- update webpages for version v1.3.80
-
-
-## [1.3.79] - 2025-02-23
-### Added
-- add FTP_USER input for firmware upload in Gitea release workflow
-
-### Changed
-- update webpages for version v1.3.79
-
-
-## [1.3.78] - 2025-02-23
-### Changed
-- update webpages for version v1.3.78
-
-### Fixed
-- change FTP protocol from FTPS to FTP for file upload in workflow
-
-
-## [1.3.77] - 2025-02-23
-### Changed
-- update webpages for version v1.3.77
-
-### Fixed
-- replace ncftp with lftp for secure firmware upload
-
-
-## [1.3.76] - 2025-02-23
-### Changed
-- update webpages for version v1.3.76
-
-### Fixed
-- replace FTP action with curl for secure firmware upload and install ncftp
-
-
-## [1.3.75] - 2025-02-23
-### Changed
-- update webpages for version v1.3.75
-
-### Fixed
-- update FTP user and enhance SSL options in gitea-release workflow
-
-
-## [1.3.74] - 2025-02-23
-### Changed
-- update webpages for version v1.3.74
-
-### Fixed
-- update password syntax in gitea-release workflow
-
-
-## [1.3.73] - 2025-02-23
-### Changed
-- update webpages for version v1.3.73
-- update version to 1.3.72 in platformio.ini
-
-
-## [1.3.72] - 2025-02-23
-### Changed
-- update webpages for version v1.3.72
-
-### Fixed
-- update FTP options for Gitea release workflow
-
-
-## [1.3.71] - 2025-02-23
-### Added
-- add FTP upload step for firmware in Gitea release workflow
-
-### Changed
-- update webpages for version v1.3.71
-
-
-## [1.3.70] - 2025-02-23
-### Changed
-- update webpages for version v1.3.70
-
-
-## [1.3.69] - 2025-02-23
-### Changed
-- update webpages for version v1.3.69
-
-### Fixed
-- update release note generation to use the second latest tag
-
-
-## [1.3.68] - 2025-02-23
-### Changed
-- update webpages for version v1.3.68
-
-### Fixed
-- update release note generation to include commit hash and author
-- remove commented test line from platformio.ini
-
-
-## [1.3.67] - 2025-02-23
-### Changed
-- update webpages for version v1.3.67
-- ci: update release note generation to use the latest tag
-
-
-## [1.3.66] - 2025-02-23
-### Changed
-- update webpages for version v1.3.66
-- ci: remove redundant git fetch for tags in release note generation
-
-
-## [1.3.65] - 2025-02-22
-### Changed
-- update webpages for version v1.3.65
-- ci: improve release note generation by fetching tags and sorting unique commits
-
-
-## [1.3.64] - 2025-02-22
-### Changed
-- update webpages for version v1.3.64
-- remove unnecessary closing tags from header.html
-
-
-## [1.3.63] - 2025-02-22
-### Added
-- update update-form background and add glass border effect
-
-### Changed
-- update webpages for version v1.3.63
-- update release note generation for initial release handling
-
-
-## [1.3.62] - 2025-02-22
-### Changed
-- update webpages for version v1.3.62
-- update background colors and improve layout for update sections
-
-
-## [1.3.61] - 2025-02-22
-### Added
-- update release notes generation to use previous tag for changes
-
-### Changed
-- update webpages for version v1.3.61
-
-
-## [1.3.60] - 2025-02-22
-### Added
-- remove automatic git push from changelog update script
-- implement release notes generation with categorized changes since last tag
-
-### Changed
-- update webpages for version v1.3.60
-
-
-## [1.3.59] - 2025-02-22
-### Added
-- implement enhanced update progress handling and WebSocket notifications
-- improve update progress reporting and enhance WebSocket notifications
-- enhance update progress handling and add WebSocket closure notification
-- implement WebSocket for update progress and enhance update response handling
-
-### Changed
-- update webpages for version v1.3.59
-
-
-## [1.3.58] - 2025-02-22
-### Added
-- implement backup and restore functionality for Bambu credentials and Spoolman URL
-
-### Changed
-- update webpages for version v1.3.58
-- update upgrade page message and improve progress display logic
-
-
-## [1.3.57] - 2025-02-22
-### Changed
-- update webpages for version v1.3.57
-- update header title to 'Filament Management Tool' in multiple HTML files
-
-
-## [1.3.56] - 2025-02-22
-### Changed
-- update webpages for version v1.3.56
-- update header title and improve SPIFFS update error handling
-- clarify comments in Gitea and GitHub release workflows
-
-
-## [1.3.55] - 2025-02-22
-### Changed
-- update webpages for version v1.3.55
-- update component descriptions in README files
-
-
-## [1.3.54] - 2025-02-22
-### Changed
-- update webpages for version v1.3.54
-- workflow: update SPIFFS binary creation to exclude header
-
-
-## [1.3.53] - 2025-02-22
-### Changed
-- version: update to version 1.3.53
-- update changelog for version 1.3.51
-- update changelog for version 1.3.51
-- workflow: update SPIFFS binary magic byte and revert version to 1.3.51
-
-
-## [1.3.52] - 2025-02-22
-### Changed
-- update webpages for version v1.3.52
-- workflow: update SPIFFS binary creation to use correct chip revision (0xEB for Rev 3)
-
-
-## [1.3.51] - 2025-02-22
-### Changed
-- update changelog for version 1.3.51
-- workflow: update SPIFFS binary magic byte and revert version to 1.3.51
-
-## [1.3.50] - 2025-02-22
-### Changed
-- update webpages for version v1.3.50
-
-
-## [1.3.49] - 2025-02-22
-### Changed
-- update webpages for version v1.3.49
-- workflow: update SPIFFS binary header to use correct chip revision
-
-
-## [1.3.48] - 2025-02-22
-### Changed
-- update webpages for version v1.3.48
-- workflow: update SPIFFS binary header for firmware release
-
-
-## [1.3.47] - 2025-02-22
-### Changed
-- update webpages for version v1.3.47
-- workflow: optimize firmware and SPIFFS update process, improve progress handling and logging
-
-
-## [1.3.46] - 2025-02-22
-### Changed
-- update webpages for version v1.3.46
-
-
-## [1.3.45] - 2025-02-22
-### Changed
-- update webpages for version v1.3.45
-- workflow: update SPIFFS binary creation to include minimal header and adjust update validation logic
-
-
-## [1.3.44] - 2025-02-22
-### Changed
-- update webpages for version v1.3.44
-- update header title to 'Hollo Lollo Trollo'
-- update header title to 'Filament Management Tool' and improve update response messages
-
-
-## [1.3.43] - 2025-02-22
-### Changed
-- update webpages for version v1.3.43
-- update header title to 'Hollo Lollo Trollo'
-
-
-## [1.3.42] - 2025-02-22
-### Changed
-- update webpages for version v1.3.42
-
-### Fixed
-- correct path for SPIFFS binary creation in Gitea release workflow
-
-
-## [1.3.41] - 2025-02-22
-### Changed
-- update webpages for version v1.3.41
-
-### Fixed
-- remove redundant buffer size setting in NFC initialization
-- update SPIFFS binary creation and enhance NFC buffer size
-
-
-## [1.3.40] - 2025-02-22
-### Changed
-- update webpages for version v1.3.40
-
-### Fixed
-- update SPIFFS binary header and enhance WebSocket error handling
-
-
-## [1.3.39] - 2025-02-22
-### Changed
-- update webpages for version v1.3.39
-- workflow: update SPIFFS binary creation to set chip version to max supported
-
-
-## [1.3.38] - 2025-02-22
-### Changed
-- update webpages for version v1.3.38
-- workflow: update SPIFFS binary creation with minimal ESP32 image header
-
-
-## [1.3.37] - 2025-02-22
-### Changed
-- update webpages for version v1.3.37
-- workflow: update ESP32-WROOM image header for SPIFFS binary creation
-
-
-## [1.3.36] - 2025-02-22
-### Changed
-- update webpages for version v1.3.36
-- partition: update SPIFFS binary header and offsets in workflow files
-
-
-## [1.3.35] - 2025-02-22
-### Changed
-- update webpages for version v1.3.35
-- partition: update SPIFFS binary header and offsets in workflow files
-
-
-## [1.3.34] - 2025-02-22
-### Changed
-- update webpages for version v1.3.34
-- partition: update SPIFFS binary creation and offsets in workflow files
-
-
-## [1.3.33] - 2025-02-22
-### Changed
-- update webpages for version v1.3.33
-- partition: update spiffs offset and app sizes in partition files
-- partition: update spiffs offset in partition files
-- partition: update app sizes and offsets in partitions.csv
-
-
-## [1.3.32] - 2025-02-22
-### Changed
-- update webpages for version v1.3.32
-- workflow: update magic byte for SPIFFS binary creation
-
-
-## [1.3.31] - 2025-02-22
-### Changed
-- update webpages for version v1.3.31
-- workflow: remove unnecessary data and SPIFFS change checks from release workflows
-
-
-## [1.3.30] - 2025-02-22
-### Changed
-- update webpages for version v1.3.30
-- workflow: update Gitea and GitHub release workflows to create SPIFFS binary with magic byte
-
-
-## [1.3.29] - 2025-02-21
-### Changed
-- update webpages for version v1.3.29
-- workflow: update Gitea release workflow to create release before file uploads
-
-
-## [1.3.28] - 2025-02-21
-### Changed
-- update webpages for version v1.3.28
-- workflow: update Gitea release workflow to use file uploads with curl
-
-
-## [1.3.27] - 2025-02-21
-### Added
-- workflow: add GITEA_TOKEN secret for Gitea API access in release workflows
-
-### Changed
-- update webpages for version v1.3.27
-
-
-## [1.3.26] - 2025-02-21
-### Changed
-- update webpages for version v1.3.26
-
-### Fixed
-- workflow: improve Gitea release workflow with enhanced error handling and debug outputs
-
-
-## [1.3.25] - 2025-02-21
-### Changed
-- update webpages for version v1.3.25
-- workflow: update Gitea release workflow to include RUNNER_NAME and improve error handling
-
-
-## [1.3.24] - 2025-02-21
-### Changed
-- update webpages for version v1.3.24
-- workflow: rename update files to upgrade in GitHub release workflow
-- workflow: aktualisiere bestehende Einträge im Changelog für vorhandene Versionen
-
-### Fixed
-- workflow: improve Gitea release process with dynamic URL determination and debug outputs
-
-
-## [1.3.23] - 2025-02-21
-### Changed
-- update webpages for version v1.3.23
-
-### Fixed
-- workflow: enhance Gitea release process with debug outputs and API connection checks
-
-
-## [1.3.22] - 2025-02-21
-### Added
-- workflow: improve Gitea release process with additional environment variables and error handling
-
-### Changed
-- update webpages for version v1.3.22
-
-
-## [1.3.21] - 2025-02-21
-### Changed
-- update webpages for version v1.3.21
-- workflow: enhance Gitea release process with API integration and token management
-
-
-## [1.3.20] - 2025-02-21
-### Changed
-- update webpages for version v1.3.20
-- workflow: enable git tagging and pushing for Gitea releases
-
-
-## [1.3.19] - 2025-02-21
-### Changed
-- update webpages for version v1.3.19
-- workflow: enable git push for version tagging in Gitea release
-
-
-## [1.3.18] - 2025-02-21
-### Changed
-- ACHTUNG: Installiere einmal das filaman_full.bin danach kannst du über die upgrade Files aktualisieren und deine Settings bleiben auch erhalten.
-- ATTENTION: Install the filaman_full.bin once, then you can update via the upgrade files and your settings will also be retained.
-
-
-
-## [1.3.18] - 2025-02-21
-### Added
-- add note about filaman_full.bin installation in changelog
-
-### Changed
-- update webpages for version v1.3.18
-- update changelog for version 1.3.18 and enhance update script for existing entries
-
-## [1.3.17] - 2025-02-21
-### Changed
-- update webpages for version v1.3.17
-- ci: comment out git tag and push commands in gitea-release workflow
-
-
-## [1.3.16] - 2025-02-21
-### Changed
-- update webpages for version v1.3.16
-- ci: update filenames for firmware and website binaries in release workflows
-
-
-## [1.3.15] - 2025-02-21
-### Changed
-- update webpages for version v1.3.15
-
-### Fixed
-- ci: fix missing 'fi' in GitHub release workflow script
-
-
-## [1.3.14] - 2025-02-21
-### Changed
-- update webpages for version v1.3.14
-- ci: update GitHub release workflow to improve file upload handling
-
-
-## [1.3.13] - 2025-02-21
-### Changed
-- update webpages for version v1.3.13
-- ci: update GitHub release workflow to use RELEASE_TOKEN for improved security
-
-
-## [1.3.12] - 2025-02-21
-### Changed
-- update webpages for version v1.3.12
-- ci: enhance GitHub release workflow with token handling and file upload improvements
-
-
-## [1.3.11] - 2025-02-21
-### Changed
-- update webpages for version v1.3.11
-- ci: refactor Gitea release workflow by simplifying input handling and removing unnecessary checks
-
-
-## [1.3.10] - 2025-02-21
-### Changed
-- update webpages for version v1.3.10
-- ci: simplify GitHub release workflow by removing provider verification step
-
-
-## [1.3.9] - 2025-02-21
-### Changed
-- update webpages for version v1.3.9
-- ci: comment out permissions for GitHub release workflow
-
-
-## [1.3.8] - 2025-02-21
-### Added
-- add Gitea and GitHub release workflows
-
-### Changed
-- update webpages for version v1.3.8
-
-
-## [1.3.7] - 2025-02-21
-### Added
-- add GitHub and Gitea release workflows
-
-### Changed
-- update webpages for version v1.3.7
-
-
-## [1.3.6] - 2025-02-21
-### Changed
-- update webpages for version v1.3.6
-
-### Fixed
-- update GitHub token reference and correct file path in release workflow
-
-
-## [1.3.5] - 2025-02-21
-### Added
-- enhance release workflow to support Gitea alongside GitHub
-
-### Changed
-- update webpages for version v1.3.5
-
-
-## [1.3.4] - 2025-02-21
-### Added
-- add Gitea and GitHub release workflows
-
-### Changed
-- update webpages for version v1.3.4
-- Merge branch 'old'
-
-
-## [1.3.3] - 2025-02-21
-### Changed
-- update webpages for version v1.3.3
-
-### Fixed
-- correct directory path in GitHub workflows for SPIFFS binary
-
-
-## [1.3.2] - 2025-02-21
-### Added
-- add missing conditional exit in release workflow
-
-### Changed
-- update webpages for version v1.3.2
-
-
-## [1.3.1] - 2025-02-21
-### Added
-- enhance GitHub and Gitea release workflows with Python setup and binary preparation
-
-### Changed
-- update webpages for version v1.3.1
-
-
-## [1.3.0] - 2025-02-21
-### Changed
-- bump version to 1.3.0 in platformio.ini
-
-
-## [1.2.102] - 2025-02-21
-### Changed
-- update webpages for version v1.2.102
-
-### Fixed
-- adjust bootloader offset in binary merge for Gitea and GitHub workflows
-
-
-## [1.2.101] - 2025-02-21
-### Changed
-- update webpages for version v1.2.101
-- always create SPIFFS binary in release workflows
-- migrate calibration value storage from EEPROM to NVS
-
-
-## [1.2.100] - 2025-02-21
-### Changed
-- update webpages for version v1.2.100
-- remove OTA handling and JSON backup/restore functions
-
-
-## [1.2.99] - 2025-02-21
-### Added
-- add SPIFFS change detection and binary copying to release workflows
-- add backup and restore functions for JSON configurations during OTA updates
-
-### Changed
-- update webpages for version v1.2.99
-- update JSON field type checks from JsonObject to String for improved validation
-- update JSON handling in API and Bambu modules for improved object management
-- update platformio.ini dependencies and improve version handling in website.cpp
-- update Cache-Control header to reflect a 1-week duration
-- remove version definition from website.cpp
-- optimize WiFi and WebSocket settings; enhance TCP/IP stack configuration
-- update upgrade page title and heading; adjust cache control duration
-
-
-## [1.2.98] - 2025-02-21
-### Changed
-- update webpages for version v1.2.98
-
-
-## [1.2.97] - 2025-02-21
-### Changed
-- update webpages for version v1.2.97
-- streamline Gitea and GitHub release workflows to check for data changes and update binary handling
-
-
-## [1.2.96] - 2025-02-21
-### Added
-- add SPIFFS build step to Gitea and GitHub release workflows
-
-### Changed
-- update webpages for version v1.2.96
-
-
-## [1.2.95] - 2025-02-21
-### Added
-- enhance update process with separate forms for firmware and webpage uploads, including validation and improved UI
-- add API endpoint for version retrieval and update HTML to display dynamic version
-
-### Changed
-- update webpages for version v1.2.95
-- bump version to 1.2.94 in platformio.ini
-
-
-## [1.2.91] - 2025-02-20
-### Added
-- add file existence checks before uploading binaries in release workflows
-
-### Changed
-- update webpages for version v1.2.91
-
-
-## [1.2.90] - 2025-02-20
-### Changed
-- update webpages for version v1.2.90
-- update Gitea and GitHub release workflows to include SPIFFS directory creation and firmware copying
-
-
-## [1.2.89] - 2025-02-20
-### Changed
-- update webpages for version v1.2.89
-- enhance OTA update process with SPIFFS support and improved error handling
-
-
-## [1.2.88] - 2025-02-20
-### Changed
-- update webpages for version v1.2.88
-
-### Fixed
-- improve OTA update handling and logging for better error reporting
-
-
-## [1.2.87] - 2025-02-20
-### Changed
-- update webpages for version v1.2.87
-
-### Fixed
-- update firmware build process and remove unused OTA environment
-
-
 ## [1.2.86] - 2025-02-20
 ### Changed
 - update webpages for version v1.2.86

README.de.md

@@ -9,9 +9,6 @@ Das System integriert sich nahtlos mit der [Spoolman](https://github.com/Donkie/
 Weitere Bilder finden Sie im [img Ordner](/img/)  
 oder auf meiner Website: [FilaMan Website](https://www.filaman.app)  
 Deutsches Erklärvideo: [Youtube](https://youtu.be/uNDe2wh9SS8?si=b-jYx4I1w62zaOHU)
-Discord Server: [https://discord.gg/vMAx2gf5](https://discord.gg/vMAx2gf5)
-
-### Es gibt jetzt auch ein Wiki, dort sind nochmal alle Funktionen beschrieben: [Wiki](https://github.com/ManuelW77/Filaman/wiki)
 
 ### ESP32 Hardware-Funktionen
 - **Gewichtsmessung:** Verwendung einer Wägezelle mit HX711-Verstärker für präzise Gewichtsverfolgung.
@@ -19,7 +16,7 @@ Discord Server: [https://discord.gg/vMAx2gf5](https://discord.gg/vMAx2gf5)
 - **OLED-Display:** Zeigt aktuelles Gewicht, Verbindungsstatus (WiFi, Bambu Lab, Spoolman).
 - **WLAN-Konnektivität:** WiFiManager für einfache Netzwerkkonfiguration.
 - **MQTT-Integration:** Verbindet sich mit Bambu Lab Drucker für AMS-Steuerung.
-- **NFC-Tag NTAG213 NTAG215:** Verwendung von NTAG213, besser NTAG215 wegen ausreichendem Speicherplatz auf dem Tag
+- **NFC-Tag NTAG215:** Verwendung von NTAG215 wegen ausreichendem Speicherplatz auf dem Tag
 
 ### Weboberflächen-Funktionen
 - **Echtzeit-Updates:** WebSocket-Verbindung für Live-Daten-Updates.
@@ -36,7 +33,6 @@ Discord Server: [https://discord.gg/vMAx2gf5](https://discord.gg/vMAx2gf5)
   - Filtern und Auswählen von Filamenten.
   - Automatische Aktualisierung der Spulengewichte.
   - Verfolgung von NFC-Tag-Zuweisungen.
-  - Unterstützt das Spoolman Octoprint Plugin
 
 ### Wenn Sie meine Arbeit unterstützen möchten, freue ich mich über einen Kaffee
 <a href="https://www.buymeacoffee.com/manuelw" target="_blank"><img src="https://cdn.buymeacoffee.com/buttons/v2/default-yellow.png" alt="Buy Me A Coffee" style="height: 30px !important;width: 108px !important;" ></a>
@@ -57,14 +53,14 @@ Discord Server: [https://discord.gg/vMAx2gf5](https://discord.gg/vMAx2gf5)
 ### Komponenten
 - **ESP32 Entwicklungsboard:** Jede ESP32-Variante.
 [Amazon Link](https://amzn.eu/d/aXThslf)
-- **HX711 5kg Wägezellen-Verstärker:** Für Gewichtsmessung.
+- **HX711 Wägezellen-Verstärker:** Für Gewichtsmessung.
-[Amazon Link](https://amzn.eu/d/06A0DLb)
+[Amazon Link](https://amzn.eu/d/1wZ4v0x)
-- **OLED 0.96 Zoll I2C weiß/gelb Display:** 128x64 SSD1306.
+- **OLED Display:** 128x64 SSD1306.
-[Amazon Link](https://amzn.eu/d/0AuBp2c)
+[Amazon Link](https://amzn.eu/d/dozAYDU)
-- **PN532 NFC NXP RFID-Modul V3:** Für NFC-Tag-Operationen.
+- **PN532 NFC Modul:** Für NFC-Tag-Operationen.
-[Amazon Link](https://amzn.eu/d/jfIuQXb)
+[Amazon Link](https://amzn.eu/d/8205DDh)
-- **NFC Tags NTAG213 NTA215:** RFID Tag
+- **NFC-Tag:** NTAG215
-[Amazon Link](https://amzn.eu/d/9Z6mXc1)
+[Amazon Link](https://amzn.eu/d/fywy4c4)
 
 ### Pin-Konfiguration
 | Komponente        | ESP32 Pin |
@@ -75,15 +71,10 @@ Discord Server: [https://discord.gg/vMAx2gf5](https://discord.gg/vMAx2gf5)
 | OLED SCL          | 22        |
 | PN532 IRQ         | 32        |
 | PN532 RESET       | 33        |
-| PN532 SDA         | 21        |
+| PN532 SCK         | 14        |
-| PN532 SCL         | 22        |
+| PN532 MOSI        | 13        |
-
+| PN532 MISO        | 12        |
-**Achte darauf, dass am PN532 die DIP-Schalter auf I2C gestellt sind**
+| PN532 CS/SS       | 15        |
-
-![Wiring](./img/Schaltplan.png)
-
-![myWiring](./img/IMG_2589.jpeg)
-![myWiring](./img/IMG_2590.jpeg)
 
 ## Software-Abhängigkeiten
 
@@ -110,31 +101,7 @@ Discord Server: [https://discord.gg/vMAx2gf5](https://discord.gg/vMAx2gf5)
   - PN532 NFC Modul
   - Verbindungskabel
 
-## Wichtiger Hinweis
+### Schritt-für-Schritt Installation
-Du musst Spoolman auf DEBUG Modus setzten, da man bisher in Spoolman keine CORS Domains setzen kann!
-
-```
-# Enable debug mode
-# If enabled, the client will accept requests from any host
-# This can be useful when developing, but is also a security risk
-# Default: FALSE
-#SPOOLMAN_DEBUG_MODE=TRUE
-```
-
-## Schritt-für-Schritt Installation
-### Einfache Installation
-1. **Gehe auf [FilaMan Installer](https://www.filaman.app/installer.html)**
-
-2. **Stecke dein ESP an den Rechner und klicke Connect**
-
-3. **Wähle dein Device Port und klicke Intall**
-
-4. **Ersteinrichtung:**
-    - Mit dem "FilaMan" WLAN-Zugangspunkt verbinden.
-    - WLAN-Einstellungen über das Konfigurationsportal vornehmen.
-    - Weboberfläche unter `http://filaman.local` oder der IP-Adresse aufrufen.
-
-### Compile by yourself
 1. **Repository klonen:**
     ```bash
     git clone https://github.com/ManuelW77/Filaman.git

README.md

@@ -6,16 +6,12 @@ FilaMan is a filament management system for 3D printing. It uses ESP32 hardware
 Users can manage filament spools, monitor the status of the Automatic Material System (AMS) and make settings via a web interface. 
 The system integrates seamlessly with [Bambulab](https://bambulab.com/en-us) 3D printers and [Spoolman](https://github.com/Donkie/Spoolman) filament management as well as the [Openspool](https://github.com/spuder/OpenSpool) NFC-TAG format.
 
-
 ![Scale](./img/scale_trans.png)
 
 
 More Images can be found in the [img Folder](/img/)  
 or my website:[FilaMan Website](https://www.filaman.app)  
 german explanatory video: [Youtube](https://youtu.be/uNDe2wh9SS8?si=b-jYx4I1w62zaOHU)
-Discord Server: [https://discord.gg/vMAx2gf5](https://discord.gg/vMAx2gf5)
-
-### Now more detailed informations about the usage: [Wiki](https://github.com/ManuelW77/Filaman/wiki)
 
 ### ESP32 Hardware Features
 - **Weight Measurement:** Using a load cell with HX711 amplifier for precise weight tracking.
@@ -23,7 +19,7 @@ Discord Server: [https://discord.gg/vMAx2gf5](https://discord.gg/vMAx2gf5)
 - **OLED Display:** Shows current weight, connection status (WiFi, Bambu Lab, Spoolman).
 - **WiFi Connectivity:** WiFiManager for easy network configuration.
 - **MQTT Integration:** Connects to Bambu Lab printer for AMS control.
-- **NFC-Tag NTAG213 NTAG215:** Use NTAG213, better NTAG215 because of enaught space on the Tag
+- **NFC-Tag NTAG215:** Use NTAG215 because of enaught space on the Tag
 
 ### Web Interface Features
 - **Real-time Updates:** WebSocket connection for live data updates.
@@ -40,7 +36,6 @@ Discord Server: [https://discord.gg/vMAx2gf5](https://discord.gg/vMAx2gf5)
   - Filter and select filaments.
   - Update spool weights automatically.
   - Track NFC tag assignments.
-  - Supports Spoolman Octoprint Plugin
 
 ### If you want to support my work, i would be happy to get a coffe
 <a href="https://www.buymeacoffee.com/manuelw" target="_blank"><img src="https://cdn.buymeacoffee.com/buttons/v2/default-yellow.png" alt="Buy Me A Coffee" style="height: 30px !important;width: 108px !important;" ></a>
@@ -61,14 +56,14 @@ Discord Server: [https://discord.gg/vMAx2gf5](https://discord.gg/vMAx2gf5)
 ### Components
 - **ESP32 Development Board:** Any ESP32 variant.
 [Amazon Link](https://amzn.eu/d/aXThslf)
-- **HX711 5kg Load Cell Amplifier:** For weight measurement.
+- **HX711 Load Cell Amplifier:** For weight measurement.
-[Amazon Link](https://amzn.eu/d/06A0DLb)
+[Amazon Link](https://amzn.eu/d/1wZ4v0x)
-- **OLED 0.96 Zoll I2C white/yellow Display:** 128x64 SSD1306.
+- **OLED Display:** 128x64 SSD1306.
-[Amazon Link](https://amzn.eu/d/0AuBp2c)
+[Amazon Link](https://amzn.eu/d/dozAYDU)
-- **PN532 NFC NXP RFID-Modul V3:** For NFC tag operations.
+- **PN532 NFC Module:** For NFC tag operations.
-[Amazon Link](https://amzn.eu/d/jfIuQXb)
+[Amazon Link](https://amzn.eu/d/8205DDh)
-- **NFC Tags NTAG213 NTAG215:** RFID Tag
+- **NFC-Tag:** NTAG215
-[Amazon Link](https://amzn.eu/d/9Z6mXc1)
+[Amazon Link](https://amzn.eu/d/fywy4c4)
 
 
 ### Pin Configuration
@@ -80,15 +75,10 @@ Discord Server: [https://discord.gg/vMAx2gf5](https://discord.gg/vMAx2gf5)
 | OLED SCL          | 22        |
 | PN532 IRQ         | 32        |
 | PN532 RESET       | 33        |
-| PN532 SDA         | 21        |
+| PN532 SCK  	    | 14        |
-| PN532 SCL         | 22        |
+| PN532 MOSI    	| 13        |
-
+| PN532 MISO       	| 12        |
-**Make sure that the DIP switches on the PN532 are set to I2C**
+| PN532 CS/SS       | 15        |
-
-![Wiring](./img/Schaltplan.png)
-
-![myWiring](./img/IMG_2589.jpeg)
-![myWiring](./img/IMG_2590.jpeg)
 
 ## Software Dependencies
 
@@ -101,9 +91,9 @@ Discord Server: [https://discord.gg/vMAx2gf5](https://discord.gg/vMAx2gf5)
 - `Adafruit_SSD1306`: OLED display control
 - `HX711`: Load cell communication
 
-### Installation
+## Installation
 
-## Prerequisites
+### Prerequisites
 - **Software:**
   - [PlatformIO](https://platformio.org/) in VS Code
   - [Spoolman](https://github.com/Donkie/Spoolman) instance
@@ -115,32 +105,7 @@ Discord Server: [https://discord.gg/vMAx2gf5](https://discord.gg/vMAx2gf5)
   - PN532 NFC Module
   - Connecting wires
 
-## Important Note
+### Step-by-Step Installation
-You have to activate Spoolman in debug mode, because you are not able to set CORS Domains in Spoolman yet.
-
-```
-# Enable debug mode
-# If enabled, the client will accept requests from any host
-# This can be useful when developing, but is also a security risk
-# Default: FALSE
-#SPOOLMAN_DEBUG_MODE=TRUE
-```
-
-
-## Step-by-Step Installation
-### Easy Installation
-1. **Go to [FilaMan Installer](https://www.filaman.app/installer.html)**
-
-2. **Plug you device in and push Connect button**
-
-3. **Select your Device Port and push Intall**
-
-4. **Initial Setup:**
-    - Connect to the "FilaMan" WiFi access point.
-    - Configure WiFi settings through the captive portal.
-    - Access the web interface at `http://filaman.local` or the IP address.
-
-### Compile by yourself
 1. **Clone the Repository:**
     ```bash
     git clone https://github.com/ManuelW77/Filaman.git
@@ -159,6 +124,25 @@ You have to activate Spoolman in debug mode, because you are not able to set COR
     - Configure WiFi settings through the captive portal.
     - Access the web interface at `http://filaman.local` or the IP address.
 
+## GitHub Actions Configuration
+
+### Required Secrets for Gitea Releases
+
+When using Gitea as your repository host, you need to configure the following secrets in your repository:
+
+- `GITEA_API_URL`: The base URL of your Gitea instance, including protocol (e.g., `https://git.example.com`)
+- `GITEA_TOKEN`: Your Gitea access token with permissions to create releases
+- `GITEA_REPOSITORY`: The repository name in format `owner/repo` (e.g., `username/filaman`)
+
+Example values:
+```
+GITEA_API_URL=https://git.example.com
+GITEA_TOKEN=abcdef1234567890
+GITEA_REPOSITORY=username/filaman
+```
+
+Make sure to set these secrets in your repository settings under Settings > Secrets and Variables > Actions.
+
 ## Documentation
 
 ### Relevant Links

html/bambu_filaments.json

@@ -1,31 +1,7 @@
 {
-    "GFU99": "TPU",
+    "GFU99": "Generic TPU",
-    "GFN99": "PA",
+    "GFN99": "Generic PA",
-    "GFN98": "PA-CF",
+    "GFN98": "Generic PA-CF",
-    "GFL99": "PLA",
-    "GFL96": "PLA Silk",
-    "GFL98": "PLA-CF",
-    "GFL95": "PLA High Speed",
-    "GFG99": "PETG",
-    "GFG98": "PETG-CF",
-    "GFG97": "PCTG",
-    "GFB99": "ABS",
-    "GFC99": "PC",
-    "GFB98": "ASA",
-    "GFS99": "PVA",
-    "GFS98": "HIPS",
-    "GFT98": "PPS-CF",
-    "GFT97": "PPS",
-    "GFN97": "PPA-CF",
-    "GFN96": "PPA-GF",
-    "GFP99": "PE",
-    "GFP98": "PE-CF",
-    "GFP97": "PP",
-    "GFP96": "PP-CF",
-    "GFP95": "PP-GF",
-    "GFR99": "EVA",
-    "GFR98": "PHA",
-    "GFS97": "BVOH",
     "GFA01": "Bambu PLA Matte",
     "GFA00": "Bambu PLA Basic",
     "GFA09": "Bambu PLA Tough",
@@ -37,11 +13,15 @@
     "GFL03": "eSUN PLA+",
     "GFL01": "PolyTerra PLA",
     "GFL00": "PolyLite PLA",
+    "GFL99": "Generic PLA",
+    "GFL96": "Generic PLA Silk",
+    "GFL98": "Generic PLA-CF",
     "GFA50": "Bambu PLA-CF",
     "GFS02": "Bambu Support For PLA",
     "GFA11": "Bambu PLA Aero",
     "GFL04": "Overture PLA",
     "GFL05": "Overture Matte PLA",
+    "GFL95": "Generic PLA High Speed",
     "GFA12": "Bambu PLA Glow",
     "GFA13": "Bambu PLA Dynamic",
     "GFA15": "Bambu PLA Galaxy",
@@ -50,21 +30,41 @@
     "GFU00": "Bambu TPU 95A HF",
     "GFG00": "Bambu PETG Basic",
     "GFT01": "Bambu PET-CF",
+    "GFG99": "Generic PETG",
+    "GFG98": "Generic PETG-CF",
     "GFG50": "Bambu PETG-CF",
     "GFG60": "PolyLite PETG",
     "GFG01": "Bambu PETG Translucent",
+    "GFG97": "Generic PCTG",
     "GFB00": "Bambu ABS",
+    "GFB99": "Generic ABS",
     "GFB60": "PolyLite ABS",
     "GFB50": "Bambu ABS-GF",
     "GFC00": "Bambu PC",
+    "GFC99": "Generic PC",
+    "GFB98": "Generic ASA",
     "GFB01": "Bambu ASA",
     "GFB61": "PolyLite ASA",
     "GFB02": "Bambu ASA-Aero",
+    "GFS99": "Generic PVA",
     "GFS04": "Bambu PVA",
     "GFS01": "Bambu Support G",
     "GFN03": "Bambu PA-CF",
     "GFN04": "Bambu PAHT-CF",
     "GFS03": "Bambu Support For PA/PET",
     "GFN05": "Bambu PA6-CF",
-    "GFN08": "Bambu PA6-GF"
+    "GFN08": "Bambu PA6-GF",
+    "GFS98": "Generic HIPS",
+    "GFT98": "Generic PPS-CF",
+    "GFT97": "Generic PPS",
+    "GFN97": "Generic PPA-CF",
+    "GFN96": "Generic PPA-GF",
+    "GFP99": "Generic PE",
+    "GFP98": "Generic PE-CF",
+    "GFP97": "Generic PP",
+    "GFP96": "Generic PP-CF",
+    "GFP95": "Generic PP-GF",
+    "GFR99": "Generic EVA",
+    "GFR98": "Generic PHA",
+    "GFS97": "Generic BVOH"
 }

html/header.html

@@ -6,24 +6,13 @@
     <title>FilaMan - Filament Management Tool</title>
     <link rel="icon" type="image/png" href="/favicon.ico">
     <link rel="stylesheet" href="style.css">
-    <script>
-        fetch('/api/version')
-            .then(response => response.json())
-            .then(data => {
-                const versionSpan = document.querySelector('.version');
-                if (versionSpan) {
-                    versionSpan.textContent = 'v' + data.version;
-                }
-            })
-            .catch(error => console.error('Error fetching version:', error));
-    </script>
 </head>
 <body>
     <div class="navbar">
         <div style="display: flex; align-items: center; gap: 2rem;">
             <img src="/logo.png" alt="FilaMan Logo" class="logo">
             <div class="logo-text">
-                <h1>FilaMan<span class="version"></span></h1>
+                <h1>FilaMan<span class="version">v1.2.86</span></h1>
                 <h4>Filament Management Tool</h4>
             </div>
         </div>

html/index.html

@@ -6,24 +6,13 @@
     <title>FilaMan - Filament Management Tool</title>
     <link rel="icon" type="image/png" href="/favicon.ico">
     <link rel="stylesheet" href="style.css">
-    <script>
-        fetch('/api/version')
-            .then(response => response.json())
-            .then(data => {
-                const versionSpan = document.querySelector('.version');
-                if (versionSpan) {
-                    versionSpan.textContent = 'v' + data.version;
-                }
-            })
-            .catch(error => console.error('Error fetching version:', error));
-    </script>
 </head>
 <body>
     <div class="navbar">
         <div style="display: flex; align-items: center; gap: 2rem;">
             <img src="/logo.png" alt="FilaMan Logo" class="logo">
             <div class="logo-text">
-                <h1>FilaMan<span class="version"></span></h1>
+                <h1>FilaMan<span class="version">v1.2.86</span></h1>
                 <h4>Filament Management Tool</h4>
             </div>
         </div>
@@ -47,7 +36,7 @@
 
 <!-- head -->
 
-    <div class="content">
+    <div class="container">
         <h1>FilaMan</h1>
         <p>Filament Management Tool</p>
         <p>Your smart solution for <strong>Filament Management</strong> in 3D printing.</p>
@@ -55,11 +44,10 @@
         <h2>About FilaMan</h2>
         <p>
             FilaMan is a tool designed to simplify filament spool management. It allows you to identify and weigh filament spools, 
-            automatically sync data with the self-hosted <a href="https://github.com/Donkie/Spoolman" target="_blank">Spoolman</a> platform.
+            automatically sync data with the self-hosted <a href="https://github.com/Donkie/Spoolman" target="_blank">Spoolman</a> platform, 
+            and ensure compatibility with <a href="https://github.com/spuder/OpenSpool" target="_blank">OpenSpool</a> for Bambu printers.
         </p>
 
-        <p>Get more information at <a href="https://www.filaman.app" target="_blank">https://www.filaman.app</a> and <a href="https://github.com/ManuelW77/Filaman" target="_blank">https://github.com/ManuelW77/Filaman</a>.</p>
-
         <div class="features">
             <div class="feature">
                 <h3>Spool Identification</h3>
@@ -74,6 +62,12 @@
                 <p>Works with OpenSpool to recognize and activate spools on Bambu printers.</p>
             </div>
         </div>
+
+        <h2>Future Plans</h2>
+        <p>
+            We are working on expanding compatibility to support smaller NFC tags like NTag213 
+            and developing custom software to enhance the OpenSpool experience.
+        </p>
     </div>
 </body>
 </html>

html/own_filaments.json

@@ -1,31 +0,0 @@
-{
-    "TPU": "GFU99",
-    "PA": "GFN99",
-    "PA-CF": "GFN98",
-    "PLA": "GFL99",
-    "PLA Silk": "GFL96",
-    "PLA-CF": "GFL98",
-    "PLA High Speed": "GFL95",
-    "PETG": "GFG99",
-    "PETG-CF": "GFG98",
-    "PCTG": "GFG97",
-    "ABS": "GFB99",
-    "ABS+HS": "GFB99",
-    "PC": "GFC99",
-    "PC/ABS": "GFC99",
-    "ASA": "GFB98",
-    "PVA": "GFS99",
-    "HIPS": "GFS98",
-    "PPS-CF": "GFT98",
-    "PPS": "GFT97",
-    "PPA-CF": "GFN97",
-    "PPA-GF": "GFN96",
-    "PE": "GFP99",
-    "PE-CF": "GFP98",
-    "PP": "GFP97",
-    "PP-CF": "GFP96",
-    "PP-GF": "GFP95",
-    "EVA": "GFR99",
-    "PHA": "GFR98",
-    "BVOH": "GFS97"
-}

html/rfid.html

@@ -6,24 +6,13 @@
     <title>FilaMan - Filament Management Tool</title>
     <link rel="icon" type="image/png" href="/favicon.ico">
     <link rel="stylesheet" href="style.css">
-    <script>
-        fetch('/api/version')
-            .then(response => response.json())
-            .then(data => {
-                const versionSpan = document.querySelector('.version');
-                if (versionSpan) {
-                    versionSpan.textContent = 'v' + data.version;
-                }
-            })
-            .catch(error => console.error('Error fetching version:', error));
-    </script>
 </head>
 <body>
     <div class="navbar">
         <div style="display: flex; align-items: center; gap: 2rem;">
             <img src="/logo.png" alt="FilaMan Logo" class="logo">
             <div class="logo-text">
-                <h1>FilaMan<span class="version"></span></h1>
+                <h1>FilaMan<span class="version">v1.2.86</span></h1>
                 <h4>Filament Management Tool</h4>
             </div>
         </div>

html/rfid.js

@@ -150,13 +150,6 @@ function initWebSocket() {
                     ramStatus.textContent = `${data.freeHeap}k`;
                 }
             }
-            else if (data.type === 'setSpoolmanSettings') {
-                if (data.payload == 'success') {
-                    showNotification(`Spoolman Settings set successfully`, true);
-                } else {
-                    showNotification(`Error setting Spoolman Settings`, false);
-                }
-            }
         };
     } catch (error) {
         isConnected = false;
@@ -292,14 +285,6 @@ function displayAmsData(amsData) {
                     <img src="spool_in.png" alt="Spool In" style="width: 48px; height: 48px; transform: rotate(180deg) scaleX(-1);">
                 </button>`;
 
-            const spoolmanButtonHtml = `
-                <button class="spool-button" onclick="handleSpoolmanSettings('${tray.tray_info_idx}', '${tray.setting_id}', '${tray.cali_idx}', '${tray.nozzle_temp_min}', '${tray.nozzle_temp_max}')" 
-                        style="position: absolute; bottom: 0px; right: 0px; 
-                               background: none; border: none; padding: 0; 
-                               cursor: pointer; display: none;">
-                    <img src="set_spoolman.png" alt="Spool In" style="width: 38px; height: 38px;">
-                </button>`;
-
             if (!hasAnyContent) {
                 return `
                     <div class="tray">
@@ -363,7 +348,6 @@ function displayAmsData(amsData) {
                         ${trayDetails}
                         ${tempHTML}
                         ${(ams.ams_id === 255 && tray.tray_type !== '') ? outButtonHtml : ''}
-                        ${(tray.setting_id != "" && tray.setting_id != "null") ? spoolmanButtonHtml : ''}
                     </div>
                     
                 </div>`;
@@ -389,36 +373,6 @@ function updateSpoolButtons(show) {
     });
 }
 
-function handleSpoolmanSettings(tray_info_idx, setting_id, cali_idx, nozzle_temp_min, nozzle_temp_max) {
-    // Hole das ausgewählte Filament
-    const selectedText = document.getElementById("selected-filament").textContent;
-
-    // Finde die ausgewählte Spule in den Daten
-    const selectedSpool = spoolsData.find(spool => 
-        `${spool.id} | ${spool.filament.name} (${spool.filament.material})` === selectedText
-    );
-
-    const payload = {
-        type: 'setSpoolmanSettings',
-        payload: {
-            filament_id: selectedSpool.filament.id,
-            tray_info_idx: tray_info_idx,
-            setting_id: setting_id,
-            cali_idx: cali_idx,
-            temp_min: nozzle_temp_min,
-            temp_max: nozzle_temp_max
-        }
-    };
-
-    try {
-        socket.send(JSON.stringify(payload));
-        showNotification(`Setting send to Spoolman`, true);
-    } catch (error) {
-        console.error("Error while sending settings to Spoolman:", error);
-        showNotification("Error while sending!", false);
-    }
-}
-
 function handleSpoolOut() {
     // Erstelle Payload
     const payload = {
@@ -640,6 +594,8 @@ function writeNfcTag() {
 
     // Erstelle das NFC-Datenpaket mit korrekten Datentypen
     const nfcData = {
+        version: "2.0",
+        protocol: "openspool",
         color_hex: selectedSpool.filament.color_hex || "FFFFFF",
         type: selectedSpool.filament.material,
         min_temp: minTemp,

html/spoolman.html

@@ -6,24 +6,13 @@
     <title>FilaMan - Filament Management Tool</title>
     <link rel="icon" type="image/png" href="/favicon.ico">
     <link rel="stylesheet" href="style.css">
-    <script>
-        fetch('/api/version')
-            .then(response => response.json())
-            .then(data => {
-                const versionSpan = document.querySelector('.version');
-                if (versionSpan) {
-                    versionSpan.textContent = 'v' + data.version;
-                }
-            })
-            .catch(error => console.error('Error fetching version:', error));
-    </script>
 </head>
 <body>
     <div class="navbar">
         <div style="display: flex; align-items: center; gap: 2rem;">
             <img src="/logo.png" alt="FilaMan Logo" class="logo">
             <div class="logo-text">
-                <h1>FilaMan<span class="version"></span></h1>
+                <h1>FilaMan<span class="version">v1.2.86</span></h1>
                 <h4>Filament Management Tool</h4>
             </div>
         </div>
@@ -52,18 +41,11 @@
             if (spoolmanUrl && spoolmanUrl.trim() !== "") {
                 document.getElementById('spoolmanUrl').value = spoolmanUrl;
             }
-            
-            // Initialize OctoPrint fields visibility
-            toggleOctoFields();
         };
 
         function checkSpoolmanInstance() {
             const url = document.getElementById('spoolmanUrl').value;
-            const spoolmanOctoEnabled = document.getElementById('spoolmanOctoEnabled').checked;
+            fetch(`/api/checkSpoolman?url=${encodeURIComponent(url)}`)
-            const spoolmanOctoUrl = document.getElementById('spoolmanOctoUrl').value;
-            const spoolmanOctoToken = document.getElementById('spoolmanOctoToken').value;
-            
-            fetch(`/api/checkSpoolman?url=${encodeURIComponent(url)}&octoEnabled=${spoolmanOctoEnabled}&octoUrl=${spoolmanOctoUrl}&octoToken=${spoolmanOctoToken}`)
                 .then(response => response.json())
                 .then(data => {
                     if (data.healthy) {
@@ -81,10 +63,8 @@
             const ip = document.getElementById('bambuIp').value;
             const serial = document.getElementById('bambuSerial').value;
             const code = document.getElementById('bambuCode').value;
-            const autoSend = document.getElementById('autoSend').checked;
-            const autoSendTime = document.getElementById('autoSendTime').value;
 
-            fetch(`/api/bambu?bambu_ip=${encodeURIComponent(ip)}&bambu_serialnr=${encodeURIComponent(serial)}&bambu_accesscode=${encodeURIComponent(code)}&autoSend=${autoSend}&autoSendTime=${autoSendTime}`)
+            fetch(`/api/bambu?bambu_ip=${encodeURIComponent(ip)}&bambu_serialnr=${encodeURIComponent(serial)}&bambu_accesscode=${encodeURIComponent(code)}`)
                 .then(response => response.json())
                 .then(data => {
                     if (data.healthy) {
@@ -97,15 +77,6 @@
                     document.getElementById('bambuStatusMessage').innerText = 'Error while saving: ' + error.message;
                 });
         }
-
-        /**
-         * Controls visibility of OctoPrint configuration fields based on checkbox state
-         * Called on page load and when checkbox changes
-         */
-        function toggleOctoFields() {
-            const octoEnabled = document.getElementById('spoolmanOctoEnabled').checked;
-            document.getElementById('octoFields').style.display = octoEnabled ? 'block' : 'none';
-        }
     </script>
     <script>
         var spoolmanUrl = "{{spoolmanUrl}}";
@@ -113,30 +84,12 @@
     
     <div class="content">
         <h1>Spoolman API URL / Bambu Credentials</h1>
-
+        <label for="spoolmanUrl">Set URL/IP to your Spoolman-Instanz:</label>
-        <div class="card">
-            <div class="card-body">
-                <h5 class="card-title">Set URL/IP to your Spoolman-Instanz</h5>
         <input type="text" id="spoolmanUrl" placeholder="http://ip-or-url-of-your-spoolman-instanz:port">
-                <h5 class="card-title">If you want to enable sending Spool to Spoolman Octoprint Plugin:</h5>
-                <p>
-                    <input type="checkbox" id="spoolmanOctoEnabled" {{spoolmanOctoEnabled}} onchange="toggleOctoFields()"> Send to Octo-Plugin
-                </p>
-                <div id="octoFields" style="display: none;">
-                    <p>
-                        <input type="text" id="spoolmanOctoUrl" placeholder="http://ip-or-url-of-your-octoprint-instanz:port" value="{{spoolmanOctoUrl}}">
-                        <input type="text" id="spoolmanOctoToken" placeholder="Your Octoprint Token" value="{{spoolmanOctoToken}}">
-                    </p>
-                </div>
-                
         <button onclick="checkSpoolmanInstance()">Save Spoolman URL</button>
         <p id="statusMessage"></p>
-            </div>
-        </div>
 
-        <div class="card">
+        <h2>Bambu Lab Printer Credentials</h2>
-            <div class="card-body">
-                <h5 class="card-title">Bambu Lab Printer Credentials</h5>
         <div class="bambu-settings">
             <div class="input-group">
                 <label for="bambuIp">Bambu Drucker IP-Adresse:</label>
@@ -150,22 +103,9 @@
                 <label for="bambuCode">Access Code:</label>
                 <input type="text" id="bambuCode" placeholder="Access Code vom Drucker" value="{{bambuCode}}">
             </div>
-                    <hr>
+            <button onclick="saveBambuCredentials()">Save Bambu Credentials</button>
-                    <p>If activated, FilaMan will automatically update the next filled tray with the last scanned and weighed spool.</p>
-                    <div class="input-group" style="display: flex; margin-bottom: 0;">
-                        <label for="autoSend" style="width: 250px; margin-right: 5px;">Auto Send to Bambu:</label>
-                        <label for="autoSendTime" style="width: 250px; margin-right: 5px;">Wait for Spool in Sec:</label>
-                    </div>
-                    <div class="input-group" style="display: flex;">
-                        <input type="checkbox" id="autoSend" {{autoSendToBambu}} style="width: 190px; margin-right: 10px;">
-                        <input type="number" min="60" id="autoSendTime" placeholder="Time to wait" value="{{autoSendTime}}" style="width: 100px;">
-                    </div>
-
-                    <button style="margin: 0;" onclick="saveBambuCredentials()">Save Bambu Credentials</button>
             <p id="bambuStatusMessage"></p>
         </div>
     </div>
-        </div>
-    </div>
 </body>
 </html>

html/spoolman.js

@@ -86,7 +86,7 @@ function populateVendorDropdown(data, selectedSmId = null) {
     });
 
     // Nach der Schleife: Formatierung der Gesamtlänge
-    console.log("Total Length: ", totalLength);
+    console.log("Total Lenght: ", totalLength);
     const formattedLength = totalLength > 1000 
         ? (totalLength / 1000).toFixed(2) + " km" 
         : totalLength.toFixed(2) + " m";
@@ -97,10 +97,8 @@ function populateVendorDropdown(data, selectedSmId = null) {
         ? (weightInKg / 1000).toFixed(2) + " t" 
         : weightInKg.toFixed(2) + " kg";
 
-    // Dropdown mit gefilterten Herstellern befüllen - alphabetisch sortiert
+    // Dropdown mit gefilterten Herstellern befüllen
-    Object.entries(filteredVendors)
+    Object.entries(filteredVendors).forEach(([id, name]) => {
-        .sort(([, nameA], [, nameB]) => nameA.localeCompare(nameB)) // Sort vendors alphabetically by name
-        .forEach(([id, name]) => {
         const option = document.createElement("option");
         option.value = id;
         option.textContent = name;

html/style.css

@@ -188,18 +188,14 @@ label {
     font-weight: bold; 
 }
 
-input[type="text"], input[type="submit"], input[type="number"] { 
+input[type="text"], input[type="submit"] { 
     padding: 10px; 
     border: 1px solid #ccc; 
     border-radius: 5px; 
     font-size: 16px; 
 }
 
-input[type="number"] { 
+input[type="text"]:focus { 
-    width: 108px !important; 
-}
-
-input[type="text"]:focus, input[type="number"]:focus { 
     border-color: #007bff; 
     outline: none; 
 }
@@ -283,10 +279,9 @@ a:hover {
 
 /* Karten-Stil für optische Trennung */
 .card {
-    background: var(--primary-color);
+    background: #f9f9f9;
-    width: 500px;
     padding: 15px;
-    margin: 20px auto;
+    margin: 20px 0;
     border-radius: 8px;
     box-shadow: 0 2px 4px rgba(0, 0, 0, 0.1);
 }
@@ -765,19 +760,17 @@ a:hover {
     right: 20px;
     padding: 15px 25px;
     border-radius: 4px;
-    color: black;
+    color: white;
     z-index: 1000;
     animation: slideIn 0.3s ease-out;
 }
 
 .notification.success {
     background-color: #28a745;
-    color: black !important;
 }
 
 .notification.error {
     background-color: #dc3545;
-    color: white !important;
 }
 
 .notification.fade-out {
@@ -966,6 +959,7 @@ input[type="submit"]:disabled,
 
 /* Bambu Settings Erweiterung */
 .bambu-settings {
+    background: white;
     padding: 20px;
     border-radius: 8px;
     box-shadow: 0 2px 4px rgba(0, 0, 0, 0.1);
@@ -1019,7 +1013,6 @@ input[type="submit"]:disabled,
     color: #000;
     vertical-align: middle;
     margin-left: 0.5rem;
-    text-shadow: none !important;
 }
 
 .progress-container {
@@ -1058,10 +1051,9 @@ input[type="submit"]:disabled,
 }
 .update-form {
     background: var(--primary-color);
-    box-shadow: 0 4px 8px rgba(0, 0, 0, 0.05);
-    border: var(--glass-border);
     padding: 20px;
     border-radius: 8px;
+    box-shadow: 0 2px 4px rgba(0,0,0,0.1);
     margin: 0 auto;
     width: 400px;
     text-align: center;
@@ -1072,7 +1064,7 @@ input[type="submit"]:disabled,
     padding: 8px;
     border: 1px solid #ddd;
     border-radius: 4px;
-    background-color: #4CAF50;
+    background: white;
 }
 .update-form input[type="submit"] {
     background-color: #4CAF50;
@@ -1094,66 +1086,10 @@ input[type="submit"]:disabled,
 .warning {
     background-color: var(--primary-color);
     border: 1px solid #ffe0b2;
+    color: white;
+    padding: 15px;
     margin: 20px auto;
     border-radius: 4px;
     max-width: 600px;
     text-align: center;
-    color: #e65100;
-    padding: 15px;
-}
-
-.update-options {
-    display: flex;
-    gap: 2rem;
-    margin: 2rem 0;
-}
-.update-section {
-    flex: 1;
-    background: var(--background-green);
-    padding: 1.5rem;
-    border-radius: 8px;
-}
-.update-section h2 {
-    margin-top: 0;
-    color: #333;
-}
-.update-section p {
-    color: #666;
-    margin-bottom: 1rem;
-}
-.progress-container {
-    margin: 20px 0;
-    background: #f0f0f0;
-    border-radius: 4px;
-    overflow: hidden;
-}
-.progress-bar {
-    width: 0;
-    height: 20px;
-    background: #4CAF50;
-    transition: width 0.3s ease-in-out;
-    text-align: center;
-    line-height: 20px;
-    color: white;
-}
-.status {
-    margin-top: 20px;
-    padding: 10px;
-    border-radius: 4px;
-    display: none;
-}
-.status.success {
-    background: #e8f5e9;
-    color: #2e7d32;
-}
-.status.error {
-    background: #ffebee;
-    color: #c62828;
-}
-.warning {
-    background: #fff3e0;
-    color: #e65100;
-    padding: 15px;
-    border-radius: 4px;
-    margin-bottom: 20px;
 }

html/upgrade.html

@@ -6,24 +6,13 @@
     <title>FilaMan - Filament Management Tool</title>
     <link rel="icon" type="image/png" href="/favicon.ico">
     <link rel="stylesheet" href="style.css">
-    <script>
-        fetch('/api/version')
-            .then(response => response.json())
-            .then(data => {
-                const versionSpan = document.querySelector('.version');
-                if (versionSpan) {
-                    versionSpan.textContent = 'v' + data.version;
-                }
-            })
-            .catch(error => console.error('Error fetching version:', error));
-    </script>
 </head>
 <body>
     <div class="navbar">
         <div style="display: flex; align-items: center; gap: 2rem;">
             <img src="/logo.png" alt="FilaMan Logo" class="logo">
             <div class="logo-text">
-                <h1>FilaMan<span class="version"></span></h1>
+                <h1>FilaMan<span class="version">v1.2.86</span></h1>
                 <h4>Filament Management Tool</h4>
             </div>
         </div>
@@ -51,34 +40,18 @@
         <h1>Firmware Upgrade</h1>
 
         <div class="warning">
-            <strong>Warning:</strong> Do not power off the device during update.
+            <strong>Warning:</strong> Please do not turn off or restart the device during the update. 
+            The device will restart automatically after the update.
         </div>
 
-        <div class="update-options">
-            <div class="update-section">
-                <h2>Firmware Update</h2>
-                <p>Upload a new firmware file (filaman_*.bin)</p>
         <div class="update-form">
-                    <form id="firmwareForm" enctype='multipart/form-data' data-type="firmware">
+            <form id="updateForm" enctype='multipart/form-data'>
                 <input type='file' name='update' accept='.bin' required>
                 <input type='submit' value='Start Firmware Update'>
             </form>
         </div>
-            </div>
 
-            <div class="update-section">
+        <div class="progress-container">
-                <h2>Webpage Update</h2>
-                <p>Upload a new webpage file (webpage_*.bin)</p>
-                <div class="update-form">
-                    <form id="webpageForm" enctype='multipart/form-data' data-type="webpage">
-                        <input type='file' name='update' accept='.bin' required>
-                        <input type='submit' value='Start Webpage Update'>
-                    </form>
-                </div>
-            </div>
-        </div>
-
-        <div class="progress-container" style="display: none;">
             <div class="progress-bar">0%</div>
         </div>
         <div class="status"></div>
@@ -91,163 +64,91 @@
             statusContainer.style.display = 'none';
         }
 
-        const progress = document.querySelector('.progress-bar');
+        document.getElementById('updateForm').addEventListener('submit', async (e) => {
-        const progressContainer = document.querySelector('.progress-container');
-        const status = document.querySelector('.status');
-        let updateInProgress = false;
-        let lastReceivedProgress = 0;
-
-        // WebSocket Handling
-        let ws = null;
-        let wsReconnectTimer = null;
-
-        function connectWebSocket() {
-            ws = new WebSocket('ws://' + window.location.host + '/ws');
-            
-            ws.onmessage = function(event) {
-                try {
-                    const data = JSON.parse(event.data);
-                    if (data.type === "updateProgress" && updateInProgress) {
-                        // Zeige Fortschrittsbalken
-                        progressContainer.style.display = 'block';
-                        
-                        // Aktualisiere den Fortschritt nur wenn er größer ist
-                        const newProgress = parseInt(data.progress);
-                        if (!isNaN(newProgress) && newProgress >= lastReceivedProgress) {
-                            progress.style.width = newProgress + '%';
-                            progress.textContent = newProgress + '%';
-                            lastReceivedProgress = newProgress;
-                        }
-                        
-                        // Zeige Status-Nachricht
-                        if (data.message || data.status) {
-                            status.textContent = data.message || getStatusMessage(data.status);
-                            status.className = 'status success';
-                            status.style.display = 'block';
-                            
-                            // Starte Reload wenn Update erfolgreich
-                            if (data.status === 'success' || lastReceivedProgress >= 98) {
-                                clearTimeout(wsReconnectTimer);
-                                setTimeout(() => {
-                                    window.location.href = '/';
-                                }, 30000);
-                            }
-                        }
-                    }
-                } catch (e) {
-                    console.error('WebSocket message error:', e);
-                }
-            };
-
-            ws.onclose = function() {
-                if (updateInProgress) {
-                    // Wenn der Fortschritt hoch genug ist, gehen wir von einem erfolgreichen Update aus
-                    if (lastReceivedProgress >= 85) {
-                        status.textContent = "Update appears successful! Device is restarting... Page will reload in 30 seconds.";
-                        status.className = 'status success';
-                        status.style.display = 'block';
-                        clearTimeout(wsReconnectTimer);
-                        setTimeout(() => {
-                            window.location.href = '/';
-                        }, 30000);
-                    } else {
-                        // Versuche Reconnect bei niedrigem Fortschritt
-                        wsReconnectTimer = setTimeout(connectWebSocket, 1000);
-                    }
-                }
-            };
-
-            ws.onerror = function(err) {
-                console.error('WebSocket error:', err);
-                if (updateInProgress && lastReceivedProgress >= 85) {
-                    status.textContent = "Update appears successful! Device is restarting... Page will reload in 30 seconds.";
-                    status.className = 'status success';
-                    status.style.display = 'block';
-                    setTimeout(() => {
-                        window.location.href = '/';
-                    }, 30000);
-                }
-            };
-        }
-
-        // Initial WebSocket connection
-        connectWebSocket();
-
-        function getStatusMessage(status) {
-            switch(status) {
-                case 'starting': return 'Starting update...';
-                case 'uploading': return 'Uploading...';
-                case 'finalizing': return 'Finalizing update...';
-                case 'restoring': return 'Restoring configurations...';
-                case 'preparing': return 'Preparing for restart...';
-                case 'success': return 'Update successful! Device is restarting... Page will reload in 30 seconds.';
-                default: return 'Updating...';
-            }
-        }
-
-        function handleUpdate(e) {
             e.preventDefault();
             const form = e.target;
             const file = form.update.files[0];
-            const updateType = form.dataset.type;
-            
             if (!file) {
-                alert('Please select a file.');
+                alert('Please select a firmware file.');
                 return;
             }
 
-            // Validate file name pattern
+            const formData = new FormData();
-            if (updateType === 'firmware' && !file.name.startsWith('upgrade_filaman_firmware_')) {
+            formData.append('update', file);
-                alert('Please select a valid firmware file (upgrade_filaman_firmware_*.bin)');
+
-                return;
+            const progress = document.querySelector('.progress-bar');
-            }
+            const progressContainer = document.querySelector('.progress-container');
-            if (updateType === 'webpage' && !file.name.startsWith('upgrade_filaman_website_')) {
+            const status = document.querySelector('.status');
-                alert('Please select a valid webpage file (upgrade_filaman_website_*.bin)');
-                return;
-            }
             
-            // Reset UI
-            updateInProgress = true;
             progressContainer.style.display = 'block';
             status.style.display = 'none';
             status.className = 'status';
-            progress.style.width = '0%';
+            form.querySelector('input[type=submit]').disabled = true;
-            progress.textContent = '0%';
 
-            // Disable submit buttons
-            document.querySelectorAll('form input[type=submit]').forEach(btn => btn.disabled = true);
-
-            // Send update
             const xhr = new XMLHttpRequest();
             xhr.open('POST', '/update', true);
 
+            xhr.upload.onprogress = (e) => {
+                if (e.lengthComputable) {
+                    const percentComplete = (e.loaded / e.total) * 100;
+                    progress.style.width = percentComplete + '%';
+                    progress.textContent = Math.round(percentComplete) + '%';
+                }
+            };
+
             xhr.onload = function() {
-                if (xhr.status !== 200 && !progress.textContent.startsWith('100')) {
+                try {
-                    status.textContent = "Update failed: " + (xhr.responseText || "Unknown error");
+                    let response = this.responseText;
-                    status.className = 'status error';
+                    try {
+                        const jsonResponse = JSON.parse(response);
+                        response = jsonResponse.message;
+                        
+                        if (jsonResponse.restart) {
+                            status.textContent = response + " Redirecting in 20 seconds...";
+                            let countdown = 20;
+                            const timer = setInterval(() => {
+                                countdown--;
+                                if (countdown <= 0) {
+                                    clearInterval(timer);
+                                    window.location.href = '/';
+                                } else {
+                                    status.textContent = response + ` Redirecting in ${countdown} seconds...`;
+                                }
+                            }, 1000);
+                        }
+                    } catch (e) {
+                        if (!isNaN(response)) {
+                            const percent = parseInt(response);
+                            progress.style.width = percent + '%';
+                            progress.textContent = percent + '%';
+                            return;
+                        }
+                    }
+                    
+                    status.textContent = response;
+                    status.classList.add(xhr.status === 200 ? 'success' : 'error');
                     status.style.display = 'block';
-                    updateInProgress = false;
+                    
-                    document.querySelectorAll('form input[type=submit]').forEach(btn => btn.disabled = false);
+                    if (xhr.status !== 200) {
+                        form.querySelector('input[type=submit]').disabled = false;
+                    }
+                } catch (error) {
+                    status.textContent = 'Error: ' + error.message;
+                    status.classList.add('error');
+                    status.style.display = 'block';
+                    form.querySelector('input[type=submit]').disabled = false;
                 }
             };
 
             xhr.onerror = function() {
-                if (!progress.textContent.startsWith('100')) {
+                status.textContent = 'Update failed: Network error';
-                    status.textContent = "Network error during update";
+                status.classList.add('error');
-                    status.className = 'status error';
                 status.style.display = 'block';
-                    updateInProgress = false;
+                form.querySelector('input[type=submit]').disabled = false;
-                    document.querySelectorAll('form input[type=submit]').forEach(btn => btn.disabled = false);
-                }
             };
 
-            const formData = new FormData();
-            formData.append('update', file);
             xhr.send(formData);
-        }
+        });
-
-        document.getElementById('firmwareForm').addEventListener('submit', handleUpdate);
-        document.getElementById('webpageForm').addEventListener('submit', handleUpdate);
     </script>
 </body>
 </html>

html/waage.html

@@ -6,24 +6,13 @@
     <title>FilaMan - Filament Management Tool</title>
     <link rel="icon" type="image/png" href="/favicon.ico">
     <link rel="stylesheet" href="style.css">
-    <script>
-        fetch('/api/version')
-            .then(response => response.json())
-            .then(data => {
-                const versionSpan = document.querySelector('.version');
-                if (versionSpan) {
-                    versionSpan.textContent = 'v' + data.version;
-                }
-            })
-            .catch(error => console.error('Error fetching version:', error));
-    </script>
 </head>
 <body>
     <div class="navbar">
         <div style="display: flex; align-items: center; gap: 2rem;">
             <img src="/logo.png" alt="FilaMan Logo" class="logo">
             <div class="logo-text">
-                <h1>FilaMan<span class="version"></span></h1>
+                <h1>FilaMan<span class="version">v1.2.86</span></h1>
                 <h4>Filament Management Tool</h4>
             </div>
         </div>

html/wifi.html

@@ -6,24 +6,13 @@
     <title>FilaMan - Filament Management Tool</title>
     <link rel="icon" type="image/png" href="/favicon.ico">
     <link rel="stylesheet" href="style.css">
-    <script>
-        fetch('/api/version')
-            .then(response => response.json())
-            .then(data => {
-                const versionSpan = document.querySelector('.version');
-                if (versionSpan) {
-                    versionSpan.textContent = 'v' + data.version;
-                }
-            })
-            .catch(error => console.error('Error fetching version:', error));
-    </script>
 </head>
 <body>
     <div class="navbar">
         <div style="display: flex; align-items: center; gap: 2rem;">
             <img src="/logo.png" alt="FilaMan Logo" class="logo">
             <div class="logo-text">
-                <h1>FilaMan<span class="version"></span></h1>
+                <h1>FilaMan<span class="version">v1.2.86</span></h1>
                 <h4>Filament Management Tool</h4>
             </div>
         </div>

partitions.csv

@@ -1,6 +1,6 @@
 # Name,   Type, SubType,    Offset,   Size,     Flags
 nvs,      data, nvs,       0x9000,   0x5000,
 otadata,  data, ota,       0xe000,   0x2000,
-app0,     app,  ota_0,     0x10000,  0x1E0000,
+app0,     app,  ota_0,     0x10000,  0x1C0000,
-app1,     app,  ota_1,     0x1F0000, 0x1E0000,
+app1,     app,  ota_1,     0x1D0000, 0x1C0000,
-spiffs,   data, spiffs,    0x3D0000, 0x30000,
+spiffs,   data, spiffs,    0x390000, 0x60000,

platformio.ini

@@ -9,10 +9,8 @@
 ; https://docs.platformio.org/page/projectconf.html
 
 [common]
-version = "1.4.0"
+version = "1.2.86"
-to_old_version = "1.4.0"
 
-##
 [env:esp32dev]
 platform = espressif32
 board = esp32dev
@@ -22,10 +20,7 @@ monitor_speed = 115200
 lib_deps =
     tzapu/WiFiManager @ ^2.0.17
     https://github.com/me-no-dev/ESPAsyncWebServer.git#master
-    #me-no-dev/AsyncTCP @ ^1.1.1
+    me-no-dev/AsyncTCP @ ^1.1.1
-    https://github.com/esphome/AsyncTCP.git
-    #mathieucarbou/ESPAsyncWebServer @ ^3.6.0
-    #esp32async/AsyncTCP @ ^3.3.5
     bogde/HX711 @ ^0.7.5
     adafruit/Adafruit SSD1306 @ ^2.5.13
     adafruit/Adafruit GFX Library @ ^1.11.11
@@ -35,8 +30,7 @@ lib_deps =
     digitaldragon/SSLClient @ ^1.3.2
     
 ; Enable SPIFFS upload
-#board_build.filesystem = spiffs
+board_build.filesystem = spiffs
-board_build.filesystem = littlefs
 ; Update partition settings
 board_build.partitions = partitions.csv
 board_upload.flash_size = 4MB
@@ -47,29 +41,110 @@ build_flags =
     -Os
     -ffunction-sections
     -fdata-sections
-    #-DNDEBUG
+    -DNDEBUG
     -mtext-section-literals
-    -DVERSION=\"${common.version}\"
+    '-D VERSION="${common.version}"'
-    -DTOOLDVERSION=\"${common.to_old_version}\"
     -DASYNCWEBSERVER_REGEX
-    #-DCORE_DEBUG_LEVEL=3
+    -DCORE_DEBUG_LEVEL=1
     -DCONFIG_ARDUHAL_LOG_COLORS=1
-    #-DOTA_DEBUG=1
+    -DOTA_DEBUG=1
+    -DARDUINO_RUNNING_CORE=1
+    -DARDUINO_EVENT_RUNNING_CORE=1
     -DCONFIG_OPTIMIZATION_LEVEL_DEBUG=1
+    -DCONFIG_ESP32_PANIC_PRINT_REBOOT
+    -DCONFIG_ARDUINO_OTA_READSIZE=1024
+    -DCONFIG_ASYNC_TCP_RUNNING_CORE=1
+    -DCONFIG_ASYNC_TCP_USE_WDT=0
+    -DCONFIG_LWIP_TCP_MSS=1460
+    -DOTA_PARTITION_SUBTYPE=0x10
+    -DPARTITION_TABLE_OFFSET=0x8000
+    -DPARTITION_TABLE_SIZE=0x1000
+    -DCONFIG_BOOTLOADER_APP_ROLLBACK_ENABLE=1
+    -DCONFIG_BOOTLOADER_SKIP_VALIDATE_IN_DEEP_SLEEP=1
+    -DCONFIG_BOOTLOADER_SKIP_VALIDATE_ON_POWER_ON=1
+    -DCONFIG_BOOTLOADER_RESERVE_RTC_SIZE=0x1000
+    -DCONFIG_PARTITION_TABLE_OFFSET=0x8000
+    -DCONFIG_PARTITION_TABLE_MD5=y
     -DBOOT_APP_PARTITION_OTA_0=1
-    -DCONFIG_LWIP_TCP_MSL=60000
-    -DCONFIG_LWIP_TCP_RCV_BUF_DEFAULT=4096
-    -DCONFIG_LWIP_MAX_ACTIVE_TCP=16
     
 extra_scripts = 
     scripts/extra_script.py
-    ${env:buildfs.extra_scripts}
+    pre:scripts/pre_build.py     ; wird zuerst ausgeführt
+    pre:scripts/pre_spiffs.py    ; wird als zweites ausgeführt
+    pre:scripts/combine_html.py  ; wird als drittes ausgeführt
+    scripts/gzip_files.py
+
+; Remove or comment out the targets line
+;targets = buildfs, build
+
+; Add a custom target to build both
+[env:esp32dev_ota]
+platform = espressif32
+board = esp32dev
+framework = arduino
+monitor_speed = 115200
+
+lib_deps =
+    tzapu/WiFiManager @ ^2.0.17
+    https://github.com/me-no-dev/ESPAsyncWebServer.git#master
+    me-no-dev/AsyncTCP @ ^1.1.1
+    bogde/HX711 @ ^0.7.5
+    adafruit/Adafruit SSD1306 @ ^2.5.13
+    adafruit/Adafruit GFX Library @ ^1.11.11
+    adafruit/Adafruit PN532 @ ^1.3.3
+    bblanchon/ArduinoJson @ ^7.3.0
+    knolleary/PubSubClient @ ^2.8
+    digitaldragon/SSLClient @ ^1.3.2
+    
+; Enable SPIFFS upload
+board_build.filesystem = spiffs
+; Update partition settings
+board_build.partitions = partitions.csv
+board_upload.flash_size = 4MB
+board_build.flash_mode = dio
+board_upload.flash_freq = "40m"
+
+build_flags = 
+    -Os
+    -ffunction-sections
+    -fdata-sections
+    -DNDEBUG
+    -mtext-section-literals
+    '-D VERSION="${common.version}"'
+    -DASYNCWEBSERVER_REGEX
+    -DCORE_DEBUG_LEVEL=1
+    -DCONFIG_ARDUHAL_LOG_COLORS=1
+    -DOTA_DEBUG=1
+    -DARDUINO_RUNNING_CORE=1
+    -DARDUINO_EVENT_RUNNING_CORE=1
+    -DCONFIG_OPTIMIZATION_LEVEL_DEBUG=1
+    -DCONFIG_ESP32_PANIC_PRINT_REBOOT
+    -DCONFIG_ARDUINO_OTA_READSIZE=1024
+    -DCONFIG_ASYNC_TCP_RUNNING_CORE=1
+    -DCONFIG_ASYNC_TCP_USE_WDT=0
+    -DCONFIG_LWIP_TCP_MSS=1460
+    -DOTA_PARTITION_SUBTYPE=0x10
+    -DPARTITION_TABLE_OFFSET=0x8000
+    -DPARTITION_TABLE_SIZE=0x1000
+    -DCONFIG_BOOTLOADER_APP_ROLLBACK_ENABLE=1
+    -DCONFIG_BOOTLOADER_SKIP_VALIDATE_IN_DEEP_SLEEP=1
+    -DCONFIG_BOOTLOADER_SKIP_VALIDATE_ON_POWER_ON=1
+    -DCONFIG_BOOTLOADER_RESERVE_RTC_SIZE=0x1000
+    -DCONFIG_PARTITION_TABLE_OFFSET=0x8000
+    -DCONFIG_PARTITION_TABLE_MD5=y
+    -DBOOT_APP_PARTITION_OTA_0=1
     
-[env:buildfs]
 extra_scripts = 
-    pre:scripts/combine_html.py  ; Combine header with HTML files
+    scripts/extra_script.py
-    scripts/gzip_files.py       ; Compress files for SPIFFS
+    pre:scripts/pre_build.py     ; wird zuerst ausgeführt
+    pre:scripts/pre_spiffs.py    ; wird als zweites ausgeführt
+    pre:scripts/combine_html.py  ; wird als drittes ausgeführt
+    scripts/gzip_files.py
 
+; Remove or comment out the targets line
+;targets = buildfs, build
+
+; Add a custom target to build both
 [platformio]
-default_envs = esp32dev
+default_envs = esp32dev, esp32dev_ota
 

scripts/pre_spiffs.py

@@ -1,23 +1,5 @@
 Import("env")
 
-board_config = env.BoardConfig()
-
-# Calculate SPIFFS size based on partition table
-SPIFFS_START = 0x310000  # From partitions.csv
-SPIFFS_SIZE = 0xE0000   # From partitions.csv
-SPIFFS_PAGE = 256
-SPIFFS_BLOCK = 4096
-
-env.Replace(
-    MKSPIFFSTOOL="mkspiffs",
-    SPIFFSBLOCKSZ=SPIFFS_BLOCK,
-    SPIFFSBLOCKSIZE=SPIFFS_BLOCK,
-    SPIFFSSTART=SPIFFS_START,
-    SPIFFSEND=SPIFFS_START + SPIFFS_SIZE,
-    SPIFFSPAGESZ=SPIFFS_PAGE,
-    SPIFFSSIZE=SPIFFS_SIZE
-)
-
 # Wiederverwendung der replace_version Funktion
 exec(open("./scripts/pre_build.py").read())
 

scripts/update_changelog.py

@@ -64,10 +64,29 @@ def get_changes_from_git():
     
     return changes
 
+def push_changes(version):
+    """Push changes to upstream"""
+    try:
+        # Stage the CHANGELOG.md
+        subprocess.run(['git', 'add', 'CHANGELOG.md'], check=True)
+        
+        # Commit the changelog
+        commit_msg = f"docs: update changelog for version {version}"
+        subprocess.run(['git', 'commit', '-m', commit_msg], check=True)
+        
+        # Push to origin (local)
+        subprocess.run(['git', 'push', 'origin'], check=True)
+        print("Successfully pushed to origin")
+        
+    except subprocess.CalledProcessError as e:
+        print(f"Error during git operations: {e}")
+        return False
+    return True
+
 def update_changelog():
-    print("Starting changelog update...")
+    print("Starting changelog update...")  # Add this line
     version = get_version()
-    print(f"Current version: {version}")
+    print(f"Current version: {version}")   # Add this line
     today = datetime.now().strftime('%Y-%m-%d')
     
     script_dir = os.path.dirname(os.path.abspath(__file__))
@@ -92,7 +111,7 @@ def update_changelog():
     if not os.path.exists(changelog_path):
         with open(changelog_path, 'w') as f:
             f.write(f"# Changelog\n\n{changelog_entry}")
-        print(f"Created new changelog file with version {version}")
+        push_changes(version)
     else:
         with open(changelog_path, 'r') as f:
             content = f.read()
@@ -101,30 +120,9 @@ def update_changelog():
             updated_content = content.replace("# Changelog\n", f"# Changelog\n\n{changelog_entry}")
             with open(changelog_path, 'w') as f:
                 f.write(updated_content)
-            print(f"Added new version {version} to changelog")
+            push_changes(version)
         else:
-            # Version existiert bereits, aktualisiere die bestehenden Einträge
+            print(f"Version {version} already exists in changelog")
-            version_pattern = f"## \\[{version}\\] - \\d{{4}}-\\d{{2}}-\\d{{2}}"
-            next_version_pattern = "## \\[.*?\\] - \\d{4}-\\d{2}-\\d{2}"
-            
-            # Finde den Start der aktuellen Version
-            version_match = re.search(version_pattern, content)
-            if version_match:
-                version_start = version_match.start()
-                # Suche nach der nächsten Version
-                next_version_match = re.search(next_version_pattern, content[version_start + 1:])
-                
-                if next_version_match:
-                    # Ersetze den Inhalt zwischen aktueller und nächster Version
-                    next_version_pos = version_start + 1 + next_version_match.start()
-                    updated_content = content[:version_start] + changelog_entry + content[next_version_pos:]
-                else:
-                    # Wenn keine nächste Version existiert, ersetze bis zum Ende
-                    updated_content = content[:version_start] + changelog_entry + "\n"
-                
-                with open(changelog_path, 'w') as f:
-                    f.write(updated_content)
-                print(f"Updated entries for version {version}")
 
 if __name__ == "__main__":
     update_changelog()

src/api.cpp

@@ -5,20 +5,41 @@
 
 bool spoolman_connected = false;
 String spoolmanUrl = "";
-bool octoEnabled = false;
-String octoUrl = "";
-String octoToken = "";
 
 struct SendToApiParams {
     String httpType;
     String spoolsUrl;
     String updatePayload;
-    String octoToken;
 };
 
-JsonDocument fetchSingleSpoolInfo(int spoolId) {
+/*
+    // Spoolman Data
+    {
+        "version":"1.0",
+        "protocol":"openspool",
+        "color_hex":"AF7933",
+        "type":"ABS",
+        "min_temp":175,
+        "max_temp":275,
+        "brand":"Overture"
+    }
+
+    // FilaMan Data
+    {
+        "version":"1.0",
+        "protocol":"openspool",
+        "color_hex":"AF7933",
+        "type":"ABS",
+        "min_temp":175,
+        "max_temp":275,
+        "brand":"Overture",
+        "sm_id": 
+    }
+*/
+
+JsonDocument fetchSpoolsForWebsite() {
     HTTPClient http;
-    String spoolsUrl = spoolmanUrl + apiUrl + "/spool/" + spoolId;
+    String spoolsUrl = spoolmanUrl + apiUrl + "/spool";
 
     Serial.print("Rufe Spool-Daten von: ");
     Serial.println(spoolsUrl);
@@ -35,45 +56,84 @@ JsonDocument fetchSingleSpoolInfo(int spoolId) {
             Serial.print("Fehler beim Parsen der JSON-Antwort: ");
             Serial.println(error.c_str());
         } else {
-            String filamentType = doc["filament"]["material"].as<String>();
+            JsonArray spools = doc.as<JsonArray>();
-            String filamentBrand = doc["filament"]["vendor"]["name"].as<String>();
+            JsonArray filteredSpools = filteredDoc.to<JsonArray>();
 
-            int nozzle_temp_min = 0;
+            for (JsonObject spool : spools) {
-            int nozzle_temp_max = 0;
+                JsonObject filteredSpool = filteredSpools.createNestedObject();
-            if (doc["filament"]["extra"]["nozzle_temperature"].is<String>()) {
+                filteredSpool["extra"]["nfc_id"] = spool["extra"]["nfc_id"];
-                String tempString = doc["filament"]["extra"]["nozzle_temperature"].as<String>();
-                tempString.replace("[", "");
-                tempString.replace("]", "");
-                int commaIndex = tempString.indexOf(',');
 
-                if (commaIndex != -1) {
+                JsonObject filament = filteredSpool.createNestedObject("filament");
-                    nozzle_temp_min = tempString.substring(0, commaIndex).toInt();
+                filament["sm_id"] = spool["id"];
-                    nozzle_temp_max = tempString.substring(commaIndex + 1).toInt();
+                filament["id"] = spool["filament"]["id"];
+                filament["name"] = spool["filament"]["name"];
+                filament["material"] = spool["filament"]["material"];
+                filament["color_hex"] = spool["filament"]["color_hex"];
+                filament["nozzle_temperature"] = spool["filament"]["extra"]["nozzle_temperature"]; // [190,230]
+                filament["price_meter"] = spool["filament"]["extra"]["price_meter"];
+                filament["price_gramm"] = spool["filament"]["extra"]["price_gramm"];
+
+                JsonObject vendor = filament.createNestedObject("vendor");
+                vendor["id"] = spool["filament"]["vendor"]["id"];
+                vendor["name"] = spool["filament"]["vendor"]["name"];
             }
         }
+    } else {
+        Serial.print("Fehler beim Abrufen der Spool-Daten. HTTP-Code: ");
+        Serial.println(httpCode);
+    }
 
-            String filamentColor = doc["filament"]["color_hex"].as<String>();
+    http.end();
-            filamentColor.toUpperCase();
+    return filteredDoc;
+}
 
-            String tray_info_idx = doc["filament"]["extra"]["bambu_idx"].as<String>();
+JsonDocument fetchAllSpoolsInfo() {
-            tray_info_idx.replace("\"", "");
+    HTTPClient http;
+    String spoolsUrl = spoolmanUrl + apiUrl + "/spool";
 
-            String cali_idx = doc["filament"]["extra"]["bambu_cali_id"].as<String>(); // "\"153\""
+    Serial.print("Rufe Spool-Daten von: ");
-            cali_idx.replace("\"", "");
+    Serial.println(spoolsUrl);
 
-            String bambu_setting_id = doc["filament"]["extra"]["bambu_setting_id"].as<String>(); // "\"PFUSf40e9953b40d3d\""
+    http.begin(spoolsUrl);
-            bambu_setting_id.replace("\"", "");
+    int httpCode = http.GET();
 
-            doc.clear();
+    JsonDocument filteredDoc;
+    if (httpCode == HTTP_CODE_OK) {
+        String payload = http.getString();
+        JsonDocument doc;
+        DeserializationError error = deserializeJson(doc, payload);
+        if (error) {
+            Serial.print("Fehler beim Parsen der JSON-Antwort: ");
+            Serial.println(error.c_str());
+        } else {
+            JsonArray spools = doc.as<JsonArray>();
+            JsonArray filteredSpools = filteredDoc.to<JsonArray>();
 
-            filteredDoc["color"] = filamentColor;
+            for (JsonObject spool : spools) {
-            filteredDoc["type"] = filamentType;
+                JsonObject filteredSpool = filteredSpools.createNestedObject();
-            filteredDoc["nozzle_temp_min"] = nozzle_temp_min;
+                filteredSpool["price"] = spool["price"];
-            filteredDoc["nozzle_temp_max"] = nozzle_temp_max;
+                filteredSpool["remaining_weight"] = spool["remaining_weight"];
-            filteredDoc["brand"] = filamentBrand;
+                filteredSpool["used_weight"] = spool["used_weight"];
-            filteredDoc["tray_info_idx"] = tray_info_idx;
+                filteredSpool["extra"]["nfc_id"] = spool["extra"]["nfc_id"];
-            filteredDoc["cali_idx"] = cali_idx;
+
-            filteredDoc["bambu_setting_id"] = bambu_setting_id;
+                JsonObject filament = filteredSpool.createNestedObject("filament");
+                filament["id"] = spool["filament"]["id"];
+                filament["name"] = spool["filament"]["name"];
+                filament["material"] = spool["filament"]["material"];
+                filament["density"] = spool["filament"]["density"];
+                filament["diameter"] = spool["filament"]["diameter"];
+                filament["spool_weight"] = spool["filament"]["spool_weight"];
+                filament["color_hex"] = spool["filament"]["color_hex"];
+
+                JsonObject vendor = filament.createNestedObject("vendor");
+                vendor["id"] = spool["filament"]["vendor"]["id"];
+                vendor["name"] = spool["filament"]["vendor"]["name"];
+
+                JsonObject extra = filament.createNestedObject("extra");
+                extra["nozzle_temperature"] = spool["filament"]["extra"]["nozzle_temperature"];
+                extra["price_gramm"] = spool["filament"]["extra"]["price_gramm"];
+                extra["price_meter"] = spool["filament"]["extra"]["price_meter"];
+            }
         }
     } else {
         Serial.print("Fehler beim Abrufen der Spool-Daten. HTTP-Code: ");
@@ -91,21 +151,19 @@ void sendToApi(void *parameter) {
     String httpType = params->httpType;
     String spoolsUrl = params->spoolsUrl;
     String updatePayload = params->updatePayload;
-    String octoToken = params->octoToken;    
+    
 
     HTTPClient http;
     http.begin(spoolsUrl);
     http.addHeader("Content-Type", "application/json");
-    if (octoEnabled && octoToken != "") http.addHeader("X-Api-Key", octoToken);
 
     int httpCode = http.PUT(updatePayload);
     if (httpType == "PATCH") httpCode = http.PATCH(updatePayload);
-    if (httpType == "POST") httpCode = http.POST(updatePayload);
 
     if (httpCode == HTTP_CODE_OK) {
-        Serial.println("Spoolman erfolgreich aktualisiert");
+        Serial.println("Gewicht der Spule erfolgreich aktualisiert");
     } else {
-        Serial.println("Fehler beim Senden an Spoolman!");
+        Serial.println("Fehler beim Aktualisieren des Gewichts der Spule");
         oledShowMessage("Spoolman update failed");
         vTaskDelay(2000 / portTICK_PERIOD_MS);
     }
@@ -128,7 +186,7 @@ bool updateSpoolTagId(String uidString, const char* payload) {
     }
     
     // Überprüfe, ob die erforderlichen Felder vorhanden sind
-    if (!doc["sm_id"].is<String>() || doc["sm_id"].as<String>() == "") {
+    if (!doc.containsKey("sm_id") || doc["sm_id"] == "") {
         Serial.println("Keine Spoolman-ID gefunden.");
         return false;
     }
@@ -204,89 +262,6 @@ uint8_t updateSpoolWeight(String spoolId, uint16_t weight) {
     return 1;
 }
 
-bool updateSpoolOcto(int spoolId) {
-    String spoolsUrl = octoUrl + "/plugin/Spoolman/selectSpool";
-    Serial.print("Update Spule in Octoprint mit URL: ");
-    Serial.println(spoolsUrl);
-
-    JsonDocument updateDoc;
-    updateDoc["spool_id"] = spoolId;
-    updateDoc["tool"] = "tool0";
-
-    String updatePayload;
-    serializeJson(updateDoc, updatePayload);
-    Serial.print("Update Payload: ");
-    Serial.println(updatePayload);
-
-    SendToApiParams* params = new SendToApiParams();
-    if (params == nullptr) {
-        Serial.println("Fehler: Kann Speicher für Task-Parameter nicht allokieren.");
-        return false;
-    }
-    params->httpType = "POST";
-    params->spoolsUrl = spoolsUrl;
-    params->updatePayload = updatePayload;
-    params->octoToken = octoToken;
-
-    // Erstelle die Task
-    BaseType_t result = xTaskCreate(
-        sendToApi,                // Task-Funktion
-        "SendToApiTask",          // Task-Name
-        4096,                     // Stackgröße in Bytes
-        (void*)params,            // Parameter
-        0,                        // Priorität
-        NULL                      // Task-Handle (nicht benötigt)
-    );
-
-    return true;
-}
-
-bool updateSpoolBambuData(String payload) {
-    JsonDocument doc;
-    DeserializationError error = deserializeJson(doc, payload);
-    if (error) {
-        Serial.print("Fehler beim JSON-Parsing: ");
-        Serial.println(error.c_str());
-        return false;
-    }
-
-    String spoolsUrl = spoolmanUrl + apiUrl + "/filament/" + doc["filament_id"].as<String>();
-    Serial.print("Update Spule mit URL: ");
-    Serial.println(spoolsUrl);
-
-    JsonDocument updateDoc;
-    updateDoc["extra"]["bambu_setting_id"] = "\"" + doc["setting_id"].as<String>() + "\"";
-    updateDoc["extra"]["bambu_cali_id"] = "\"" + doc["cali_idx"].as<String>() + "\"";
-    updateDoc["extra"]["bambu_idx"] = "\"" + doc["tray_info_idx"].as<String>() + "\"";
-    updateDoc["extra"]["nozzle_temperature"] = "[" + doc["temp_min"].as<String>() + "," + doc["temp_max"].as<String>() + "]";
-
-    String updatePayload;
-    serializeJson(updateDoc, updatePayload);
-    Serial.print("Update Payload: ");
-    Serial.println(updatePayload);
-
-    SendToApiParams* params = new SendToApiParams();
-    if (params == nullptr) {
-        Serial.println("Fehler: Kann Speicher für Task-Parameter nicht allokieren.");
-        return false;
-    }
-    params->httpType = "PATCH";
-    params->spoolsUrl = spoolsUrl;
-    params->updatePayload = updatePayload;
-
-    // Erstelle die Task
-    BaseType_t result = xTaskCreate(
-        sendToApi,                // Task-Funktion
-        "SendToApiTask",          // Task-Name
-        4096,                     // Stackgröße in Bytes
-        (void*)params,            // Parameter
-        0,                        // Priorität
-        NULL                      // Task-Handle (nicht benötigt)
-    );
-
-    return true;
-}
-
 // #### Spoolman init
 bool checkSpoolmanExtraFields() {
     HTTPClient http;
@@ -393,7 +368,7 @@ bool checkSpoolmanExtraFields() {
                 for (uint8_t s = 0; s < extraLength; s++) {
                     bool found = false;
                     for (JsonObject field : doc.as<JsonArray>()) {
-                        if (field["key"].is<String>() && field["key"] == extraFields[s]) {
+                        if (field.containsKey("key") && field["key"] == extraFields[s]) {
                             Serial.println("Feld gefunden: " + extraFields[s]);
                             found = true;
                             break;
@@ -428,13 +403,12 @@ bool checkSpoolmanExtraFields() {
                 }
             }
         }
+        http.end();  
     }
     
     Serial.println("-------- ENDE Prüfe Felder --------");
     Serial.println();
 
-    http.end();
-
     return true;
 }
 
@@ -456,7 +430,7 @@ bool checkSpoolmanInstance(const String& url) {
             String payload = http.getString();
             JsonDocument doc;
             DeserializationError error = deserializeJson(doc, payload);
-            if (!error && doc["status"].is<String>()) {
+            if (!error && doc.containsKey("status")) {
                 const char* status = doc["status"];
                 http.end();
 
@@ -478,38 +452,24 @@ bool checkSpoolmanInstance(const String& url) {
     return false;
 }
 
-bool saveSpoolmanUrl(const String& url, bool octoOn, const String& octoWh, const String& octoTk) {
+bool saveSpoolmanUrl(const String& url) {
     if (!checkSpoolmanInstance(url)) return false;
 
     JsonDocument doc;
     doc["url"] = url;
-    doc["octoEnabled"] = octoOn;
+    Serial.print("Speichere URL in Datei: ");
-    doc["octoUrl"] = octoWh;
+    Serial.println(url);
-    doc["octoToken"] = octoTk;
-    Serial.print("Speichere Spoolman Data in Datei: ");
-    Serial.println(doc.as<String>());
     if (!saveJsonValue("/spoolman_url.json", doc)) {
         Serial.println("Fehler beim Speichern der Spoolman-URL.");
-        return false;
     }
     spoolmanUrl = url;
-    octoEnabled = octoOn;
-    octoUrl = octoWh;
-    octoToken = octoTk;
 
     return true;
 }
 
 String loadSpoolmanUrl() {
     JsonDocument doc;
-    if (loadJsonValue("/spoolman_url.json", doc) && doc["url"].is<String>()) {
+    if (loadJsonValue("/spoolman_url.json", doc) && doc.containsKey("url")) {
-        octoEnabled = (doc["octoEnabled"].is<bool>()) ? doc["octoEnabled"].as<bool>() : false;
-        if (octoEnabled && doc["octoToken"].is<String>() && doc["octoUrl"].is<String>())
-        {
-            octoUrl = doc["octoUrl"].as<String>();
-            octoToken = doc["octoToken"].as<String>();
-        }
-
         return doc["url"].as<String>();
     }
     Serial.println("Keine gültige Spoolman-URL gefunden.");

src/api.h

@@ -9,19 +9,16 @@
 
 extern bool spoolman_connected;
 extern String spoolmanUrl;
-extern bool octoEnabled;
-extern String octoUrl;
-extern String octoToken;
 
 bool checkSpoolmanInstance(const String& url);
-bool saveSpoolmanUrl(const String& url, bool octoOn, const String& octoWh, const String& octoTk);
+bool saveSpoolmanUrl(const String& url);
 String loadSpoolmanUrl(); // Neue Funktion zum Laden der URL
 bool checkSpoolmanExtraFields(); // Neue Funktion zum Überprüfen der Extrafelder
-JsonDocument fetchSingleSpoolInfo(int spoolId); // API-Funktion für die Webseite
+JsonDocument fetchSpoolsForWebsite(); // API-Funktion für die Webseite
+JsonDocument fetchAllSpoolsInfo();
+void sendAmsData(AsyncWebSocketClient *client); // Neue Funktion zum Senden von AMS-Daten
 bool updateSpoolTagId(String uidString, const char* payload); // Neue Funktion zum Aktualisieren eines Spools
 uint8_t updateSpoolWeight(String spoolId, uint16_t weight); // Neue Funktion zum Aktualisieren des Gewichts
 bool initSpoolman(); // Neue Funktion zum Initialisieren von Spoolman
-bool updateSpoolBambuData(String payload); // Neue Funktion zum Aktualisieren der Bambu-Daten
-bool updateSpoolOcto(int spoolId); // Neue Funktion zum Aktualisieren der Octo-Daten
 
 #endif

src/bambu.cpp

@@ -23,21 +23,14 @@ const char* bambu_username = "bblp";
 const char* bambu_ip = nullptr;
 const char* bambu_accesscode = nullptr;
 const char* bambu_serialnr = nullptr;
-
-String g_bambu_ip = "";
-String g_bambu_accesscode = "";
-String g_bambu_serialnr = "";
-
 bool bambu_connected = false;
-bool autoSendToBambu = false;
-int autoSetToBambuSpoolId = 0;
 
 // Globale Variablen für AMS-Daten
 int ams_count = 0;
 String amsJsonData;  // Speichert das fertige JSON für WebSocket-Clients
-AMSData ams_data[MAX_AMS];  // Definition des Arrays;
+AMSData ams_data[MAX_AMS];  // Definition des Arrays
 
-bool saveBambuCredentials(const String& ip, const String& serialnr, const String& accesscode, bool autoSend, const String& autoSendTime) {
+bool saveBambuCredentials(const String& ip, const String& serialnr, const String& accesscode) {
     if (BambuMqttTask) {
         vTaskDelete(BambuMqttTask);
     }
@@ -46,8 +39,6 @@ bool saveBambuCredentials(const String& ip, const String& serialnr, const String
     doc["bambu_ip"] = ip;
     doc["bambu_accesscode"] = accesscode;
     doc["bambu_serialnr"] = serialnr;
-    doc["autoSendToBambu"] = autoSend;
-    doc["autoSendTime"] = (autoSendTime != "") ? autoSendTime.toInt() : autoSetBambuAmsCounter;
 
     if (!saveJsonValue("/bambu_credentials.json", doc)) {
         Serial.println("Fehler beim Speichern der Bambu-Credentials.");
@@ -58,8 +49,6 @@ bool saveBambuCredentials(const String& ip, const String& serialnr, const String
     bambu_ip = ip.c_str();
     bambu_accesscode = accesscode.c_str();
     bambu_serialnr = serialnr.c_str();
-    autoSendToBambu = autoSend;
-    autoSetBambuAmsCounter = autoSendTime.toInt();
 
     vTaskDelay(100 / portTICK_PERIOD_MS);
     if (!setupMqtt()) return false;
@@ -69,27 +58,20 @@ bool saveBambuCredentials(const String& ip, const String& serialnr, const String
 
 bool loadBambuCredentials() {
     JsonDocument doc;
-    if (loadJsonValue("/bambu_credentials.json", doc) && doc["bambu_ip"].is<String>()) {
+    if (loadJsonValue("/bambu_credentials.json", doc) && doc.containsKey("bambu_ip")) {
         // Temporäre Strings für die Werte
         String ip = doc["bambu_ip"].as<String>();
         String code = doc["bambu_accesscode"].as<String>();
         String serial = doc["bambu_serialnr"].as<String>();
 
-        g_bambu_ip = ip;
-        g_bambu_accesscode = code;
-        g_bambu_serialnr = serial;
-
-        if (doc["autoSendToBambu"].is<bool>()) autoSendToBambu = doc["autoSendToBambu"].as<bool>();
-        if (doc["autoSendTime"].is<int>()) autoSetBambuAmsCounter = doc["autoSendTime"].as<int>();
-
         ip.trim();
         code.trim();
         serial.trim();
 
         // Dynamische Speicherallokation für die globalen Pointer
-        bambu_ip = g_bambu_ip.c_str();
+        bambu_ip = strdup(ip.c_str());
-        bambu_accesscode = g_bambu_accesscode.c_str();
+        bambu_accesscode = strdup(code.c_str());
-        bambu_serialnr = g_bambu_serialnr.c_str();
+        bambu_serialnr = strdup(serial.c_str());
 
         report_topic = "device/" + String(bambu_serialnr) + "/report";
         //request_topic = "device/" + String(bambu_serialnr) + "/request";
@@ -99,49 +81,19 @@ bool loadBambuCredentials() {
     return false;
 }
 
-struct FilamentResult {
+String findFilamentIdx(String brand, String type) {
-    String key;
-    String type;
-};
-
-FilamentResult findFilamentIdx(String brand, String type) {
     // JSON-Dokument für die Filament-Daten erstellen
     JsonDocument doc;
     
-    // Laden der own_filaments.json
-    String ownFilament = "";
-    if (!loadJsonValue("/own_filaments.json", doc)) 
-    {
-        Serial.println("Fehler beim Laden der eigenen Filament-Daten");
-    }
-    else
-    {
-        // Durchsuche direkt nach dem Type als Schlüssel
-        if (doc[type].is<String>()) {
-            ownFilament = doc[type].as<String>();
-        }
-        doc.clear();
-    }
-    doc.clear();
-
     // Laden der bambu_filaments.json
-    if (!loadJsonValue("/bambu_filaments.json", doc)) 
+    if (!loadJsonValue("/bambu_filaments.json", doc)) {
-    {
         Serial.println("Fehler beim Laden der Filament-Daten");
-        return {"GFL99", "PLA"}; // Fallback auf Generic PLA
+        return "GFL99"; // Fallback auf Generic PLA
     }
 
-    // Wenn eigener Typ
-    if (ownFilament != "")
-    {
-        if (doc[ownFilament].is<String>()) 
-        {
-            return {ownFilament, doc[ownFilament].as<String>()};
-        }
-    }
-
-    // 1. Erst versuchen wir die exakte Brand + Type Kombination zu finden
     String searchKey;
+    
+    // 1. Suche nach Brand + Type Kombination
     if (brand == "Bambu" || brand == "Bambulab") {
         searchKey = "Bambu " + type;
     } else if (brand == "PolyLite") {
@@ -157,46 +109,23 @@ FilamentResult findFilamentIdx(String brand, String type) {
     // Durchsuche alle Einträge nach der Brand + Type Kombination
     for (JsonPair kv : doc.as<JsonObject>()) {
         if (kv.value().as<String>() == searchKey) {
-            return {kv.key().c_str(), kv.value().as<String>()};
+            return kv.key().c_str();
         }
     }
 
-    // 2. Wenn nicht gefunden, zerlege den type String in Wörter und suche nach jedem Wort
+    // 2. Wenn nicht gefunden, suche nach Generic + Type
-    // Sammle alle vorhandenen Filamenttypen aus der JSON
+    searchKey = "Generic " + type;
-    std::vector<String> knownTypes;
     for (JsonPair kv : doc.as<JsonObject>()) {
-        String value = kv.value().as<String>();
+        if (kv.value().as<String>() == searchKey) {
-        // Extrahiere den Typ ohne Markennamen
+            return kv.key().c_str();
-        if (value.indexOf(" ") != -1) {
-            value = value.substring(value.indexOf(" ") + 1);
-        }
-        if (!value.isEmpty()) {
-            knownTypes.push_back(value);
-        }
-    }
-
-    // Zerlege den Input-Type in Wörter
-    String typeStr = type;
-    typeStr.trim();
-    
-    // Durchsuche für jedes bekannte Filament, ob es im Input vorkommt
-    for (const String& knownType : knownTypes) {
-        if (typeStr.indexOf(knownType) != -1) {
-            // Suche nach diesem Typ in der Original-JSON
-            for (JsonPair kv : doc.as<JsonObject>()) {
-                String value = kv.value().as<String>();
-                if (value.indexOf(knownType) != -1) {
-                    return {kv.key().c_str(), knownType};
-                }
-            }
         }
     }
 
     // 3. Wenn immer noch nichts gefunden, gebe GFL99 zurück (Generic PLA)
-    return {"GFL99", "PLA"};
+    return "GFL99";
 }
 
-bool sendMqttMessage(const String& payload) {
+bool sendMqttMessage(String payload) {
     Serial.println("Sending MQTT message");
     Serial.println(payload);
     if (client.publish(report_topic.c_str(), payload.c_str())) 
@@ -227,22 +156,15 @@ bool setBambuSpool(String payload) {
     int minTemp = doc["nozzle_temp_min"];
     int maxTemp = doc["nozzle_temp_max"];
     String type = doc["type"].as<String>();
-    (type == "PLA+") ? type = "PLA" : type;
     String brand = doc["brand"].as<String>();
     String tray_info_idx = (doc["tray_info_idx"].as<String>() != "-1") ? doc["tray_info_idx"].as<String>() : "";
-    if (tray_info_idx == "") {
+    if (tray_info_idx == "") tray_info_idx = (brand != "" && type != "") ? findFilamentIdx(brand, type) : "";
-        if (brand != "" && type != "") {
-            FilamentResult result = findFilamentIdx(brand, type);
-            tray_info_idx = result.key;
-            type = result.type;  // Aktualisiere den type mit dem gefundenen Basistyp
-        }
-    }
     String setting_id = doc["bambu_setting_id"].as<String>();
     String cali_idx = doc["cali_idx"].as<String>();
 
     doc.clear();
 
-    doc["print"]["sequence_id"] = "0";
+    doc["print"]["sequence_id"] = 0;
     doc["print"]["command"] = "ams_filament_setting";
     doc["print"]["ams_id"] = amsId < 200 ? amsId : 255;
     doc["print"]["tray_id"] = trayId < 200 ? trayId : 254;
@@ -250,7 +172,7 @@ bool setBambuSpool(String payload) {
     doc["print"]["nozzle_temp_min"] = minTemp;
     doc["print"]["nozzle_temp_max"] = maxTemp;
     doc["print"]["tray_type"] = type;
-    //doc["print"]["cali_idx"] = (cali_idx != "") ? cali_idx : "";
+    doc["print"]["cali_idx"] = (cali_idx != "") ? cali_idx : "";
     doc["print"]["tray_info_idx"] = tray_info_idx;
     doc["print"]["setting_id"] = setting_id;
 
@@ -272,13 +194,13 @@ bool setBambuSpool(String payload) {
 
     if (cali_idx != "") {
         yield();
-        doc["print"]["sequence_id"] = "0";
+        doc["print"]["sequence_id"] = 0;
         doc["print"]["command"] = "extrusion_cali_sel";
         doc["print"]["filament_id"] = tray_info_idx;
         doc["print"]["nozzle_diameter"] = "0.4";
         doc["print"]["cali_idx"] = cali_idx.toInt();
         doc["print"]["tray_id"] = trayId < 200 ? trayId : 254;
-        //doc["print"]["ams_id"] = amsId < 200 ? amsId : 255;
+        doc["print"]["ams_id"] = amsId < 200 ? amsId : 255;
 
         // Serialize the JSON
         String output;
@@ -296,120 +218,44 @@ bool setBambuSpool(String payload) {
         doc.clear();
         yield();
     }
+/*
+    if (setting_id != "") {
+        yield();
+        doc["print"]["sequence_id"] = 0;
+        doc["print"]["command"] = "ams_filament_setting";
+        doc["print"]["nozzle_temp_min"] = minTemp;
+        doc["print"]["nozzle_temp_max"] = maxTemp;
+        doc["print"]["setting_id"] = setting_id;
+        doc["print"]["tray_color"] = color.length() == 8 ? color : color+"FF";
+        doc["print"]["ams_id"] = amsId < 200 ? amsId : 255;
+        doc["print"]["tray_id"] = trayId < 200 ? trayId : 254;
+        doc["print"]["tray_info_idx"] = tray_info_idx;
+        doc["print"]["tray_type"] = type;
 
-    return true;
+        // Serialize the JSON
-}
+        String output;
+        serializeJson(doc, output);
 
-void autoSetSpool(int spoolId, uint8_t trayId) {
+        if (sendMqttMessage(output)) {
-    // wenn neue spule erkannt und autoSetToBambu > 0
+            Serial.println("Filament Setting successfully set");
-    JsonDocument spoolInfo = fetchSingleSpoolInfo(spoolId);
-
-    if (!spoolInfo.isNull())
-    {
-        // AMS und TRAY id ergänzen
-        spoolInfo["amsId"] = 0;
-        spoolInfo["trayId"] = trayId;
-
-        Serial.println("Auto set spool");
-        Serial.println(spoolInfo.as<String>());
-
-        setBambuSpool(spoolInfo.as<String>());
-
-        oledShowMessage("Spool set");
-    }
-
-    // id wieder zurücksetzen damit abgeschlossen
-    autoSetToBambuSpoolId = 0;
-}
-
-void updateAmsWsData(JsonDocument& doc, JsonArray& amsArray, int& ams_count, JsonObject& vtTray) {
-    // Fortfahren mit der bestehenden Verarbeitung, da Änderungen gefunden wurden
-    ams_count = amsArray.size();
-        
-    for (int i = 0; i < ams_count && i < 16; i++) {
-        JsonObject amsObj = amsArray[i];
-        JsonArray trayArray = amsObj["tray"].as<JsonArray>();
-
-        ams_data[i].ams_id = i; // Setze die AMS-ID
-        for (int j = 0; j < trayArray.size() && j < 4; j++) { // Annahme: Maximal 4 Trays pro AMS
-            JsonObject trayObj = trayArray[j];
-
-            ams_data[i].trays[j].id = trayObj["id"].as<uint8_t>();
-            ams_data[i].trays[j].tray_info_idx = trayObj["tray_info_idx"].as<String>();
-            ams_data[i].trays[j].tray_type = trayObj["tray_type"].as<String>();
-            ams_data[i].trays[j].tray_sub_brands = trayObj["tray_sub_brands"].as<String>();
-            ams_data[i].trays[j].tray_color = trayObj["tray_color"].as<String>();
-            ams_data[i].trays[j].nozzle_temp_min = trayObj["nozzle_temp_min"].as<int>();
-            ams_data[i].trays[j].nozzle_temp_max = trayObj["nozzle_temp_max"].as<int>();
-            if (trayObj["tray_type"].as<String>() == "") ams_data[i].trays[j].setting_id = "";
-            ams_data[i].trays[j].cali_idx = trayObj["cali_idx"].as<String>();
-        }
-    }
-    
-    // Setze ams_count auf die Anzahl der normalen AMS
-    ams_count = amsArray.size();
-
-    // Wenn externe Spule vorhanden, füge sie hinzu
-    if (doc["print"]["vt_tray"].is<JsonObject>()) {
-        //JsonObject vtTray = doc["print"]["vt_tray"];
-        int extIdx = ams_count;  // Index für externe Spule
-        ams_data[extIdx].ams_id = 255;  // Spezielle ID für externe Spule
-        ams_data[extIdx].trays[0].id = 254;  // Spezielle ID für externes Tray
-        ams_data[extIdx].trays[0].tray_info_idx = vtTray["tray_info_idx"].as<String>();
-        ams_data[extIdx].trays[0].tray_type = vtTray["tray_type"].as<String>();
-        ams_data[extIdx].trays[0].tray_sub_brands = vtTray["tray_sub_brands"].as<String>();
-        ams_data[extIdx].trays[0].tray_color = vtTray["tray_color"].as<String>();
-        ams_data[extIdx].trays[0].nozzle_temp_min = vtTray["nozzle_temp_min"].as<int>();
-        ams_data[extIdx].trays[0].nozzle_temp_max = vtTray["nozzle_temp_max"].as<int>();
-
-        if (doc["print"]["vt_tray"]["tray_type"].as<String>() != "")
-        {
-            //ams_data[extIdx].trays[0].setting_id = vtTray["setting_id"].as<String>();
-            ams_data[extIdx].trays[0].cali_idx = vtTray["cali_idx"].as<String>();
         }
         else
         {
-            ams_data[extIdx].trays[0].setting_id = "";
+            Serial.println("Failed to set Filament setting");
-            ams_data[extIdx].trays[0].cali_idx = "";
+            return false;
-        }
-        ams_count++;  // Erhöhe ams_count für die externe Spule
         }
 
-    // Erstelle JSON für WebSocket-Clients
+        doc.clear();
-    JsonDocument wsDoc;
+        yield();
-    JsonArray wsArray = wsDoc.to<JsonArray>();
-
-    for (int i = 0; i < ams_count; i++) {
-        JsonObject amsObj = wsArray.add<JsonObject>();
-        amsObj["ams_id"] = ams_data[i].ams_id;
-
-        JsonArray trays = amsObj["tray"].to<JsonArray>();
-        int maxTrays = (ams_data[i].ams_id == 255) ? 1 : 4;
-        
-        for (int j = 0; j < maxTrays; j++) {
-            JsonObject trayObj = trays.add<JsonObject>();
-            trayObj["id"] = ams_data[i].trays[j].id;
-            trayObj["tray_info_idx"] = ams_data[i].trays[j].tray_info_idx;
-            trayObj["tray_type"] = ams_data[i].trays[j].tray_type;
-            trayObj["tray_sub_brands"] = ams_data[i].trays[j].tray_sub_brands;
-            trayObj["tray_color"] = ams_data[i].trays[j].tray_color;
-            trayObj["nozzle_temp_min"] = ams_data[i].trays[j].nozzle_temp_min;
-            trayObj["nozzle_temp_max"] = ams_data[i].trays[j].nozzle_temp_max;
-            trayObj["setting_id"] = ams_data[i].trays[j].setting_id;
-            trayObj["cali_idx"] = ams_data[i].trays[j].cali_idx;
-        }
     }
+*/
 
-    serializeJson(wsArray, amsJsonData);
+    return true;
-    wsDoc.clear();
-    Serial.println("AMS data updated");
-    sendAmsData(nullptr);
 }
 
 // init
 void mqtt_callback(char* topic, byte* payload, unsigned int length) {
     String message;
-    
     for (int i = 0; i < length; i++) {
         message += (char)payload[i];
     }
@@ -417,20 +263,16 @@ void mqtt_callback(char* topic, byte* payload, unsigned int length) {
     // JSON-Dokument parsen
     JsonDocument doc;
     DeserializationError error = deserializeJson(doc, message);
-    message = "";
+    if (error) {
-    if (error) 
-    {
         Serial.print("Fehler beim Parsen des JSON: ");
         Serial.println(error.c_str());
         return;
     }
 
     // Prüfen, ob "print->upgrade_state" und "print.ams.ams" existieren
-    if (doc["print"]["upgrade_state"].is<JsonObject>() || (doc["print"]["command"].is<String>() && doc["print"]["command"] == "push_status")) 
+    if (doc["print"].containsKey("upgrade_state")) {
-    {
         // Prüfen ob AMS-Daten vorhanden sind
-        if (!doc["print"]["ams"].is<JsonObject>() || !doc["print"]["ams"]["ams"].is<JsonArray>()) 
+        if (!doc["print"].containsKey("ams") || !doc["print"]["ams"].containsKey("ams")) {
-        {
             return;
         }
 
@@ -462,81 +304,154 @@ void mqtt_callback(char* topic, byte* payload, unsigned int length) {
             // Vergleiche die Trays
             for (int j = 0; j < trayArray.size() && j < 4 && !hasChanges; j++) {
                 JsonObject trayObj = trayArray[j];
-
-                if (trayObj["tray_type"].as<String>() == "") ams_data[storedIndex].trays[j].setting_id = "";
-                if (trayObj["setting_id"].isNull()) trayObj["setting_id"] = "";
                 if (trayObj["tray_info_idx"].as<String>() != ams_data[storedIndex].trays[j].tray_info_idx ||
                     trayObj["tray_type"].as<String>() != ams_data[storedIndex].trays[j].tray_type ||
                     trayObj["tray_color"].as<String>() != ams_data[storedIndex].trays[j].tray_color ||
-                    (trayObj["setting_id"].as<String>() != "" && trayObj["setting_id"].as<String>() != ams_data[storedIndex].trays[j].setting_id) ||
                     trayObj["cali_idx"].as<String>() != ams_data[storedIndex].trays[j].cali_idx) {
                     hasChanges = true;
-
-                    if (autoSendToBambu && autoSetToBambuSpoolId > 0 && hasChanges)
-                    {
-                        autoSetSpool(autoSetToBambuSpoolId, ams_data[storedIndex].trays[j].id);
-                    }
-
                     break;
                 }
             }
         }
 
         // Prüfe die externe Spule
+        if (!hasChanges && doc["print"].containsKey("vt_tray")) {
             JsonObject vtTray = doc["print"]["vt_tray"];
-        if (doc["print"]["vt_tray"].is<JsonObject>()) {
+            bool foundExternal = false;
+            
             for (int i = 0; i < ams_count; i++) {
                 if (ams_data[i].ams_id == 255) {
-                    if (vtTray["tray_type"].as<String>() == "") ams_data[i].trays[0].setting_id = "";
+                    foundExternal = true;
-                    if (vtTray["setting_id"].isNull()) vtTray["setting_id"] = "";
                     if (vtTray["tray_info_idx"].as<String>() != ams_data[i].trays[0].tray_info_idx ||
                         vtTray["tray_type"].as<String>() != ams_data[i].trays[0].tray_type ||
                         vtTray["tray_color"].as<String>() != ams_data[i].trays[0].tray_color ||
-                        (vtTray["setting_id"].as<String>() != "" && vtTray["setting_id"].as<String>() != ams_data[i].trays[0].setting_id) ||
+                        vtTray["cali_idx"].as<String>() != ams_data[i].trays[0].cali_idx) {
-                        (vtTray["tray_type"].as<String>() != "" && vtTray["cali_idx"].as<String>() != ams_data[i].trays[0].cali_idx)) {
                         hasChanges = true;
-
-                        if (autoSendToBambu && autoSetToBambuSpoolId > 0 && hasChanges)
-                        {
-                            autoSetSpool(autoSetToBambuSpoolId, 254);
-                        }
                     }
                     break;
                 }
             }
+            if (!foundExternal) hasChanges = true;
         }
 
         if (!hasChanges) return;
 
-        updateAmsWsData(doc, amsArray, ams_count, vtTray);
+        // Fortfahren mit der bestehenden Verarbeitung, da Änderungen gefunden wurden
+        ams_count = amsArray.size();
+        
+        for (int i = 0; i < ams_count && i < 16; i++) {
+            JsonObject amsObj = amsArray[i];
+            JsonArray trayArray = amsObj["tray"].as<JsonArray>();
+
+            ams_data[i].ams_id = i; // Setze die AMS-ID
+            for (int j = 0; j < trayArray.size() && j < 4; j++) { // Annahme: Maximal 4 Trays pro AMS
+                JsonObject trayObj = trayArray[j];
+
+                ams_data[i].trays[j].id = trayObj["id"].as<uint8_t>();
+                ams_data[i].trays[j].tray_info_idx = trayObj["tray_info_idx"].as<String>();
+                ams_data[i].trays[j].tray_type = trayObj["tray_type"].as<String>();
+                ams_data[i].trays[j].tray_sub_brands = trayObj["tray_sub_brands"].as<String>();
+                ams_data[i].trays[j].tray_color = trayObj["tray_color"].as<String>();
+                ams_data[i].trays[j].nozzle_temp_min = trayObj["nozzle_temp_min"].as<int>();
+                ams_data[i].trays[j].nozzle_temp_max = trayObj["nozzle_temp_max"].as<int>();
+                ams_data[i].trays[j].setting_id = trayObj["setting_id"].as<String>();
+                ams_data[i].trays[j].cali_idx = trayObj["cali_idx"].as<String>();
+            }
         }
         
+        // Setze ams_count auf die Anzahl der normalen AMS
+        ams_count = amsArray.size();
+
+        // Wenn externe Spule vorhanden, füge sie hinzu
+        if (doc["print"].containsKey("vt_tray")) {
+            JsonObject vtTray = doc["print"]["vt_tray"];
+            int extIdx = ams_count;  // Index für externe Spule
+            ams_data[extIdx].ams_id = 255;  // Spezielle ID für externe Spule
+            ams_data[extIdx].trays[0].id = 254;  // Spezielle ID für externes Tray
+            ams_data[extIdx].trays[0].tray_info_idx = vtTray["tray_info_idx"].as<String>();
+            ams_data[extIdx].trays[0].tray_type = vtTray["tray_type"].as<String>();
+            ams_data[extIdx].trays[0].tray_sub_brands = vtTray["tray_sub_brands"].as<String>();
+            ams_data[extIdx].trays[0].tray_color = vtTray["tray_color"].as<String>();
+            ams_data[extIdx].trays[0].nozzle_temp_min = vtTray["nozzle_temp_min"].as<int>();
+            ams_data[extIdx].trays[0].nozzle_temp_max = vtTray["nozzle_temp_max"].as<int>();
+            ams_data[extIdx].trays[0].setting_id = vtTray["setting_id"].as<String>();
+            ams_data[extIdx].trays[0].cali_idx = vtTray["cali_idx"].as<String>();
+            ams_count++;  // Erhöhe ams_count für die externe Spule
+        }
+
+        // Sende die aktualisierten AMS-Daten
+        //sendAmsData(nullptr);
+
+        // Erstelle JSON für WebSocket-Clients
+        JsonDocument wsDoc;
+        JsonArray wsArray = wsDoc.to<JsonArray>();
+
+        for (int i = 0; i < ams_count; i++) {
+            JsonObject amsObj = wsArray.createNestedObject();
+            amsObj["ams_id"] = ams_data[i].ams_id;
+
+            JsonArray trays = amsObj.createNestedArray("tray");
+            int maxTrays = (ams_data[i].ams_id == 255) ? 1 : 4;
+            
+            for (int j = 0; j < maxTrays; j++) {
+                JsonObject trayObj = trays.createNestedObject();
+                trayObj["id"] = ams_data[i].trays[j].id;
+                trayObj["tray_info_idx"] = ams_data[i].trays[j].tray_info_idx;
+                trayObj["tray_type"] = ams_data[i].trays[j].tray_type;
+                trayObj["tray_sub_brands"] = ams_data[i].trays[j].tray_sub_brands;
+                trayObj["tray_color"] = ams_data[i].trays[j].tray_color;
+                trayObj["nozzle_temp_min"] = ams_data[i].trays[j].nozzle_temp_min;
+                trayObj["nozzle_temp_max"] = ams_data[i].trays[j].nozzle_temp_max;
+                trayObj["setting_id"] = ams_data[i].trays[j].setting_id;
+                trayObj["cali_idx"] = ams_data[i].trays[j].cali_idx;
+            }
+        }
+
+        serializeJson(wsArray, amsJsonData);
+        sendAmsData(nullptr);
+    }
     // Neue Bedingung für ams_filament_setting
-    if (doc["print"]["command"] == "ams_filament_setting") {
+    else if (doc["print"]["command"] == "ams_filament_setting") {
         int amsId = doc["print"]["ams_id"].as<int>();
         int trayId = doc["print"]["tray_id"].as<int>();
-        String settingId = (doc["print"]["setting_id"].is<String>()) ? doc["print"]["setting_id"].as<String>() : "";
+        String settingId = doc["print"]["setting_id"].as<String>();
         
         // Finde das entsprechende AMS und Tray
         for (int i = 0; i < ams_count; i++) {
             if (ams_data[i].ams_id == amsId) {
-                if (trayId == 254)
+                // Update setting_id im entsprechenden Tray
-                {
-                    // Suche AMS mit ID 255 (externe Spule)
-                    for (int j = 0; j < ams_count; j++) {
-                        if (ams_data[j].ams_id == 255) {
-                            ams_data[j].trays[0].setting_id = settingId;
-                            break;
-                        }
-                    }
-                }
-                else
-                {
                 ams_data[i].trays[trayId].setting_id = settingId;
+                
+                // Erstelle neues JSON für WebSocket-Clients
+                JsonDocument wsDoc;
+                JsonArray wsArray = wsDoc.to<JsonArray>();
+
+                for (int j = 0; j < ams_count; j++) {
+                    JsonObject amsObj = wsArray.createNestedObject();
+                    amsObj["ams_id"] = ams_data[j].ams_id;
+
+                    JsonArray trays = amsObj.createNestedArray("tray");
+                    int maxTrays = (ams_data[j].ams_id == 255) ? 1 : 4;
+                    
+                    for (int k = 0; k < maxTrays; k++) {
+                        JsonObject trayObj = trays.createNestedObject();
+                        trayObj["id"] = ams_data[j].trays[k].id;
+                        trayObj["tray_info_idx"] = ams_data[j].trays[k].tray_info_idx;
+                        trayObj["tray_type"] = ams_data[j].trays[k].tray_type;
+                        trayObj["tray_sub_brands"] = ams_data[j].trays[k].tray_sub_brands;
+                        trayObj["tray_color"] = ams_data[j].trays[k].tray_color;
+                        trayObj["nozzle_temp_min"] = ams_data[j].trays[k].nozzle_temp_min;
+                        trayObj["nozzle_temp_max"] = ams_data[j].trays[k].nozzle_temp_max;
+                        trayObj["setting_id"] = ams_data[j].trays[k].setting_id;
+                        trayObj["cali_idx"] = ams_data[j].trays[k].cali_idx;
+                    }
                 }
 
+                // Aktualisiere das globale amsJsonData
+                amsJsonData = "";
+                serializeJson(wsArray, amsJsonData);
+                
                 // Sende an WebSocket Clients
-                Serial.println("Filament setting updated");
                 sendAmsData(nullptr);
                 break;
             }
@@ -546,16 +461,15 @@ void mqtt_callback(char* topic, byte* payload, unsigned int length) {
 
 void reconnect() {
     // Loop until we're reconnected
-    uint8_t retries = 0;
     while (!client.connected()) {
-        Serial.println("Attempting MQTT re/connection...");
+        Serial.print("Attempting MQTT connection...");
         bambu_connected = false;
         oledShowTopRow();
 
         // Attempt to connect
         if (client.connect(bambu_serialnr, bambu_username, bambu_accesscode)) {
-            Serial.println("MQTT re/connected");
+            Serial.println("... re-connected");
-
+            // ... and resubscribe
             client.subscribe(report_topic.c_str());
             bambu_connected = true;
             oledShowTopRow();
@@ -565,23 +479,14 @@ void reconnect() {
             Serial.println(" try again in 5 seconds");
             bambu_connected = false;
             oledShowTopRow();
-            
+            // Wait 5 seconds before retrying
             yield();
             vTaskDelay(5000 / portTICK_PERIOD_MS);
-            if (retries > 5) {
-                Serial.println("Disable Bambu MQTT Task after 5 retries");
-                //vTaskSuspend(BambuMqttTask);
-                vTaskDelete(BambuMqttTask);
-                break;
-            }
-
-            retries++;
         }
     }
 }
 
 void mqtt_loop(void * parameter) {
-    Serial.println("Bambu MQTT Task gestartet");
     for(;;) {
         if (pauseBambuMqttTask) {
             vTaskDelay(10000);
@@ -595,7 +500,6 @@ void mqtt_loop(void * parameter) {
         }
         client.loop();
         yield();
-        esp_task_wdt_reset();
         vTaskDelay(100);
     }
 }
@@ -603,6 +507,7 @@ void mqtt_loop(void * parameter) {
 bool setupMqtt() {
     // Wenn Bambu Daten vorhanden
     bool success = loadBambuCredentials();
+    vTaskDelay(100 / portTICK_PERIOD_MS);
 
     if (!success) {
         Serial.println("Failed to load Bambu credentials");
@@ -635,7 +540,7 @@ bool setupMqtt() {
             xTaskCreatePinnedToCore(
                 mqtt_loop, /* Function to implement the task */
                 "BambuMqtt", /* Name of the task */
-                8192,  /* Stack size in words */
+                10000,  /* Stack size in words */
                 NULL,  /* Task input parameter */
                 mqttTaskPrio,  /* Priority of the task */
                 &BambuMqttTask,  /* Task handle. */
@@ -666,7 +571,6 @@ bool setupMqtt() {
 void bambu_restart() {
     if (BambuMqttTask) {
         vTaskDelete(BambuMqttTask);
-        delay(10);
     }
     setupMqtt();
 }

src/bambu.h

@@ -28,11 +28,9 @@ extern bool bambu_connected;
 
 extern int ams_count;
 extern AMSData ams_data[MAX_AMS];
-extern bool autoSendToBambu;
-extern int autoSetToBambuSpoolId;
 
 bool loadBambuCredentials();
-bool saveBambuCredentials(const String& bambu_ip, const String& bambu_serialnr, const String& bambu_accesscode, const bool autoSend, const String& autoSendTime);
+bool saveBambuCredentials(const String& bambu_ip, const String& bambu_serialnr, const String& bambu_accesscode);
 bool setupMqtt();
 void mqtt_loop(void * parameter);
 bool setBambuSpool(String payload);

src/commonFS.cpp

@@ -1,8 +1,7 @@
 #include "commonFS.h"
-#include <LittleFS.h>
 
 bool saveJsonValue(const char* filename, const JsonDocument& doc) {
-    File file = LittleFS.open(filename, "w");
+    File file = SPIFFS.open(filename, "w");
     if (!file) {
         Serial.print("Fehler beim Öffnen der Datei zum Schreiben: ");
         Serial.println(filename);
@@ -20,7 +19,7 @@ bool saveJsonValue(const char* filename, const JsonDocument& doc) {
 }
 
 bool loadJsonValue(const char* filename, JsonDocument& doc) {
-    File file = LittleFS.open(filename, "r");
+    File file = SPIFFS.open(filename, "r");
     if (!file) {
         Serial.print("Fehler beim Öffnen der Datei zum Lesen: ");
         Serial.println(filename);
@@ -36,12 +35,23 @@ bool loadJsonValue(const char* filename, JsonDocument& doc) {
     return true;
 }
 
-void initializeFileSystem() {
+bool initializeSPIFFS() {
-    if (!LittleFS.begin(true)) {
+    // Erster Versuch
-        Serial.println("LittleFS Mount Failed");
+    if (SPIFFS.begin(true)) {
-        return;
+        Serial.println("SPIFFS mounted successfully.");
+        return true;
     }
-    Serial.printf("LittleFS Total: %u bytes\n", LittleFS.totalBytes());
+    
-    Serial.printf("LittleFS Used: %u bytes\n", LittleFS.usedBytes());
+    // Formatierung versuchen
-    Serial.printf("LittleFS Free: %u bytes\n", LittleFS.totalBytes() - LittleFS.usedBytes());
+    Serial.println("Failed to mount SPIFFS. Formatting...");
+    SPIFFS.format();
+    
+    // Zweiter Versuch nach Formatierung
+    if (SPIFFS.begin(true)) {
+        Serial.println("SPIFFS formatted and mounted successfully.");
+        return true;
+    }
+    
+    Serial.println("SPIFFS initialization failed completely.");
+    return false;
 }

src/commonFS.h

@@ -2,11 +2,11 @@
 #define COMMONFS_H
 
 #include <Arduino.h>
+#include <SPIFFS.h>
 #include <ArduinoJson.h>
-#include <LittleFS.h>
 
 bool saveJsonValue(const char* filename, const JsonDocument& doc);
 bool loadJsonValue(const char* filename, JsonDocument& doc);
-void initializeFileSystem();
+bool initializeSPIFFS();
 
 #endif

src/config.cpp

@@ -40,10 +40,6 @@ const uint8_t webserverPort = 80;
 const char* apiUrl = "/api/v1";
 // ***** API
 
-// ***** Bambu Auto Set Spool
-uint8_t autoSetBambuAmsCounter = 60;
-// ***** Bambu Auto Set Spool
-
 // ***** Task Prios
 uint8_t rfidTaskCore = 1;
 uint8_t rfidTaskPrio = 1;

src/config.h

@@ -23,8 +23,6 @@ extern const uint8_t OLED_DATA_END;
 extern const char* apiUrl;
 extern const uint8_t webserverPort;
 
-extern uint8_t autoSetBambuAmsCounter;
-
 extern const unsigned char wifi_on[];
 extern const unsigned char wifi_off[];
 extern const unsigned char cloud_on[];

src/display.cpp

@@ -20,9 +20,9 @@ void setupDisplay() {
     // the library initializes this with an Adafruit splash screen.
     display.setTextColor(WHITE);
     display.display();
+    delay(1000); // Pause for 2 seconds
     oledShowTopRow();
-    oledShowMessage("FilaMan v" + String(VERSION));
+    delay(2000);
-    vTaskDelay(2000 / portTICK_PERIOD_MS);
 }
 
 void oledclearline() {
@@ -117,6 +117,7 @@ std::vector<String> splitTextIntoLines(String text, uint8_t textSize) {
         lines.push_back(currentLine);
     }
     
+    Serial.println(lines.size());
     return lines;
 }
 
@@ -139,9 +140,8 @@ void oledShowMultilineMessage(String message, uint8_t size) {
     int totalHeight = lines.size() * lineHeight;
     int startY = OLED_DATA_START + ((OLED_DATA_END - OLED_DATA_START - totalHeight) / 2);
     
-    uint8_t lineDistance = (lines.size() == 2) ? 5 : 0;
     for (size_t i = 0; i < lines.size(); i++) {
-        display.setCursor(oled_center_h(lines[i]), startY + (i * lineHeight) + (i == 1 ? lineDistance : 0));
+        display.setCursor(oled_center_h(lines[i]), startY + (i * lineHeight));
         display.print(lines[i]);
     }
     

src/main.cpp

@@ -1,4 +1,6 @@
 #include <Arduino.h>
+#include <DNSServer.h>
+#include <ESPmDNS.h>
 #include <Wire.h>
 #include <WiFi.h>
 
@@ -17,14 +19,8 @@
 void setup() {
   Serial.begin(115200);
 
-  uint64_t chipid;
-
-  chipid = ESP.getEfuseMac(); //The chip ID is essentially its MAC address(length: 6 bytes).
-  Serial.printf("ESP32 Chip ID = %04X", (uint16_t)(chipid >> 32)); //print High 2 bytes
-  Serial.printf("%08X\n", (uint32_t)chipid); //print Low 4bytes.
-
   // Initialize SPIFFS
-  initializeFileSystem();
+  initializeSPIFFS();
 
   // Start Display
   setupDisplay();
@@ -33,6 +29,7 @@ void setup() {
   initWiFi();
 
   // Webserver
+  Serial.println("Starte Webserver");
   setupWebserver(server);
 
   // Spoolman API
@@ -40,27 +37,22 @@ void setup() {
   initSpoolman();
 
   // Bambu MQTT
+  // bambu.cpp
   setupMqtt();
 
-  // NFC Reader
+  // mDNS
+  Serial.println("Starte MDNS");
+  if (!MDNS.begin("filaman")) {   // Set the hostname to "esp32.local"
+    Serial.println("Error setting up MDNS responder!");
+    while(1) {
+      delay(1000);
+    }
+  }
+  Serial.println("mDNS responder started");
+  
   startNfc();
 
-  uint8_t scaleCalibrated = start_scale();
+  start_scale();
-  if (scaleCalibrated == 3) {
-    oledShowMessage("Scale not calibrated!");
-    for (uint16_t i = 0; i < 50000; i++) {
-      yield();
-      vTaskDelay(pdMS_TO_TICKS(1));
-      esp_task_wdt_reset();
-    }
-  } else if (scaleCalibrated == 0) {
-    oledShowMessage("HX711 not found");
-    for (uint16_t i = 0; i < 50000; i++) {
-      yield();
-      vTaskDelay(pdMS_TO_TICKS(1));
-      esp_task_wdt_reset();
-    }
-  }
   
   // WDT initialisieren mit 10 Sekunden Timeout
   bool panic = true; // Wenn true, löst ein WDT-Timeout einen System-Panik aus
@@ -74,85 +66,42 @@ void setup() {
 }
 
 
-/**
- * Safe interval check that handles millis() overflow
- * @param currentTime Current millis() value
- * @param lastTime Last recorded time
- * @param interval Desired interval in milliseconds
- * @return True if interval has elapsed
- */
-bool intervalElapsed(unsigned long currentTime, unsigned long &lastTime, unsigned long interval) {
-  if (currentTime - lastTime >= interval || currentTime < lastTime) {
-    lastTime = currentTime;
-    return true;
-  }
-  return false;
-}
-
 unsigned long lastWeightReadTime = 0;
 const unsigned long weightReadInterval = 1000; // 1 second
 
-unsigned long lastAutoSetBambuAmsTime = 0;
+unsigned long lastAmsSendTime = 0;
-const unsigned long autoSetBambuAmsInterval = 1000; // 1 second
+const unsigned long amsSendInterval = 60000; // 1 minute
-uint8_t autoAmsCounter = 0;
 
 uint8_t weightSend = 0;
 int16_t lastWeight = 0;
-
+uint8_t wifiErrorCounter = 0;
-unsigned long lastWifiCheckTime = 0;
-const unsigned long wifiCheckInterval = 60000; // Überprüfe alle 60 Sekunden (60000 ms)
 
 // ##### PROGRAM START #####
 void loop() {
+  // Überprüfe den WLAN-Status
+  if (WiFi.status() != WL_CONNECTED) {
+    wifiErrorCounter++;
+    wifiOn = false;
+  } else {
+    wifiErrorCounter = 0;
+    wifiOn = true;
+  }
+  if (wifiErrorCounter > 20) ESP.restart();
+
   unsigned long currentMillis = millis();
 
-  // Überprüfe regelmäßig die WLAN-Verbindung
+  // Send AMS Data min every Minute
-  if (intervalElapsed(currentMillis, lastWifiCheckTime, wifiCheckInterval)) {
+  if (currentMillis - lastAmsSendTime >= amsSendInterval) {
-    checkWiFiConnection();
+    lastAmsSendTime = currentMillis;
-  }
+    sendAmsData(nullptr);
-
-  // Wenn Bambu auto set Spool aktiv
-  if (autoSendToBambu && autoSetToBambuSpoolId > 0) {
-    if (intervalElapsed(currentMillis, lastAutoSetBambuAmsTime, autoSetBambuAmsInterval)) 
-    {
-      if (hasReadRfidTag == 0)
-      {
-        lastAutoSetBambuAmsTime = currentMillis;
-        oledShowMessage("Auto Set         " + String(autoSetBambuAmsCounter - autoAmsCounter) + "s");
-        autoAmsCounter++;
-
-        if (autoAmsCounter >= autoSetBambuAmsCounter) 
-        {
-          autoSetToBambuSpoolId = 0;
-          autoAmsCounter = 0;
-          oledShowWeight(weight);
-        }
-      }
-      else
-      {
-        autoAmsCounter = 0;
-      }
-    }
-  }
-
-  // Wenn Waage nicht Kalibriert
-  if (scaleCalibrated == 3) 
-  {
-    oledShowMessage("Scale not calibrated!");
-    vTaskDelay(5000 / portTICK_PERIOD_MS);
-    yield();
-    esp_task_wdt_reset();
-    
-    return;
   }
 
   // Ausgabe der Waage auf Display
-  if (pauseMainTask == 0 && weight != lastWeight && hasReadRfidTag == 0 && (!autoSendToBambu || autoSetToBambuSpoolId == 0))
+  if (pauseMainTask == 0 && weight != lastWeight && hasReadRfidTag == 0)
   {
-    (weight < 2) ? ((weight < -2) ? oledShowMessage("!! -0") : oledShowWeight(0)) : oledShowWeight(weight);
+    (weight < 0) ? oledShowMessage("!! -1") : oledShowWeight(weight);
   }
 
-
   // Wenn Timer abgelaufen und nicht gerade ein RFID-Tag geschrieben wird
   if (currentMillis - lastWeightReadTime >= weightReadInterval && hasReadRfidTag < 3)
   {
@@ -196,12 +145,6 @@ void loop() {
       oledShowIcon("success");
       vTaskDelay(2000 / portTICK_PERIOD_MS);
       weightSend = 1;
-      autoSetToBambuSpoolId = spoolId.toInt();
-
-      if (octoEnabled) 
-      {
-        updateSpoolOcto(autoSetToBambuSpoolId);
-      }
     }
     else
     {

src/nfc.cpp

@@ -44,6 +44,8 @@ void payloadToJson(uint8_t *data) {
       DeserializationError error = deserializeJson(doc, jsonString);
   
       if (!error) {
+        const char* version = doc["version"];
+        const char* protocol = doc["protocol"];
         const char* color_hex = doc["color_hex"];
         const char* type = doc["type"];
         int min_temp = doc["min_temp"];
@@ -53,6 +55,8 @@ void payloadToJson(uint8_t *data) {
         Serial.println();
         Serial.println("-----------------");
         Serial.println("JSON-Parsed Data:");
+        Serial.println(version);
+        Serial.println(protocol);
         Serial.println(color_hex);
         Serial.println(type);
         Serial.println(min_temp);
@@ -89,16 +93,8 @@ bool formatNdefTag() {
     return success;
   }
 
-uint16_t readTagSize()
-{
-  uint8_t buffer[4];
-  memset(buffer, 0, 4);
-  nfc.ntag2xx_ReadPage(3, buffer);
-  return buffer[2]*8;
-}
-
 uint8_t ntag2xx_WriteNDEF(const char *payload) {
-  uint16_t tagSize = readTagSize();
+  uint8_t tagSize = 240; // 144 bytes is maximum for NTAG213
   Serial.print("Tag Size: ");Serial.println(tagSize);
 
   uint8_t pageBuffer[4] = {0, 0, 0, 0};
@@ -140,8 +136,6 @@ uint8_t ntag2xx_WriteNDEF(const char *payload) {
   if (combinedData == NULL) 
   {
     Serial.println("Fehler: Nicht genug Speicher vorhanden.");
-    oledShowMessage("Tag too small");
-    vTaskDelay(2000 / portTICK_PERIOD_MS);
     return 0;
   }
 
@@ -244,12 +238,10 @@ void writeJsonToTag(void *parameter) {
 
   hasReadRfidTag = 3;
   vTaskSuspend(RfidReaderTask);
-  vTaskDelay(50 / portTICK_PERIOD_MS);
+  vTaskDelay(500 / portTICK_PERIOD_MS);
-
   //pauseBambuMqttTask = true;
   // aktualisieren der Website wenn sich der Status ändert
   sendNfcData(nullptr);
-  vTaskDelay(100 / portTICK_PERIOD_MS);
   oledShowMessage("Waiting for NFC-Tag");
 
   // Wait 10sec for tag
@@ -339,7 +331,7 @@ void startWriteJsonToTag(const char* payload) {
     xTaskCreate(
         writeJsonToTag,        // Task-Funktion
         "WriteJsonToTagTask",       // Task-Name
-        5115,                        // Stackgröße in Bytes
+        4096,                        // Stackgröße in Bytes
         (void*)payloadCopy,         // Parameter
         rfidWriteTaskPrio,           // Priorität
         NULL                         // Task-Handle (nicht benötigt)
@@ -375,19 +367,21 @@ void scanRfidTask(void * parameter) {
 
         if (uidLength == 7)
         {
-          uint16_t tagSize = readTagSize();
+          uint8_t data[256];
-          if(tagSize > 0)
-          {
-            // Create a buffer depending on the size of the tag
-            uint8_t* data = (uint8_t*)malloc(tagSize);
-            memset(data, 0, tagSize);
 
           // We probably have an NTAG2xx card (though it could be Ultralight as well)
           Serial.println("Seems to be an NTAG2xx tag (7 byte UID)");
           
-            uint8_t numPages = readTagSize()/4;
+          for (uint8_t i = 0; i < 45; i++) {
-            for (uint8_t i = 4; i < 4+numPages; i++) {
+            /*
-              if (!nfc.ntag2xx_ReadPage(i, data+(i-4) * 4))
+            if (i < uidLength) {
+              uidString += String(uid[i], HEX);
+              if (i < uidLength - 1) {
+                  uidString += ":"; // Optional: Trennzeichen hinzufügen
+              }
+            }
+            */
+            if (!nfc.mifareclassic_ReadDataBlock(i, data + (i - 4) * 4)) 
             {
               break; // Stop if reading fails
             }
@@ -413,13 +407,6 @@ void scanRfidTask(void * parameter) {
             hasReadRfidTag = 1;
           }
          
-            free(data);
-          }
-          else
-          {
-            oledShowMessage("NFC-Tag read error");
-            hasReadRfidTag = 2;
-          }
         }
         else
         {
@@ -433,7 +420,7 @@ void scanRfidTask(void * parameter) {
         //uidString = "";
         nfcJsonData = "";
         Serial.println("Tag entfernt");
-        if (!autoSendToBambu) oledShowWeight(weight);
+        oledShowWeight(0);
       }
 
       // aktualisieren der Website wenn sich der Status ändert
@@ -469,7 +456,7 @@ void startNfc() {
     BaseType_t result = xTaskCreatePinnedToCore(
       scanRfidTask, /* Function to implement the task */
       "RfidReader", /* Name of the task */
-      5115,  /* Stack size in words */
+      10000,  /* Stack size in words */
       NULL,  /* Task input parameter */
       rfidTaskPrio,  /* Priority of the task */
       &RfidReaderTask,  /* Task handle. */

src/ota.cpp

@@ -1,243 +1,77 @@
 #include <Arduino.h>
-#include <website.h>
+#include "ota.h"
-#include <commonFS.h>
+#include <Update.h>
+#include <SPIFFS.h>
+#include "commonFS.h"
+#include "bambu.h"
+#include "scale.h"
+#include "nfc.h"
 
-// Globale Variablen für Config Backups hinzufügen
+static bool tasksAreStopped = false;
-String bambuCredentialsBackup;
-String spoolmanUrlBackup;
 
-// Globale Variable für den Update-Typ
+void stopAllTasks() {
-static int currentUpdateCommand = 0;
+    Serial.println("Stopping RFID Reader");
-
+    if (RfidReaderTask) vTaskSuspend(RfidReaderTask);
-// Globale Update-Variablen
+    Serial.println("Stopping Bambu");
-static size_t updateTotalSize = 0;
+    if (BambuMqttTask) vTaskSuspend(BambuMqttTask);
-static size_t updateWritten = 0;
+    Serial.println("Stopping Scale");
-static bool isSpiffsUpdate = false;
+    if (ScaleTask) vTaskSuspend(ScaleTask);
-
+    vTaskDelay(100 / portTICK_PERIOD_MS);
-/**
+    Serial.println("All tasks stopped");
- * Compares two version strings and determines if version1 is less than version2
- * 
- * @param version1 First version string (format: x.y.z)
- * @param version2 Second version string (format: x.y.z)
- * @return true if version1 is less than version2
- */
-bool isVersionLessThan(const String& version1, const String& version2) {
-    int major1 = 0, minor1 = 0, patch1 = 0;
-    int major2 = 0, minor2 = 0, patch2 = 0;
-    
-    // Parse version1
-    sscanf(version1.c_str(), "%d.%d.%d", &major1, &minor1, &patch1);
-    
-    // Parse version2
-    sscanf(version2.c_str(), "%d.%d.%d", &major2, &minor2, &patch2);
-    
-    // Compare major version
-    if (major1 < major2) return true;
-    if (major1 > major2) return false;
-    
-    // Major versions equal, compare minor
-    if (minor1 < minor2) return true;
-    if (minor1 > minor2) return false;
-    
-    // Minor versions equal, compare patch
-    return patch1 < patch2;
 }
 
-void backupJsonConfigs() {
+void handleOTAUpload(AsyncWebServerRequest *request, String filename, size_t index, uint8_t *data, size_t len, bool final) {
-    // Bambu Credentials backup
-    if (LittleFS.exists("/bambu_credentials.json")) {
-        File file = LittleFS.open("/bambu_credentials.json", "r");
-        if (file) {
-            bambuCredentialsBackup = file.readString();
-            file.close();
-            Serial.println("Bambu credentials backed up");
-        }
-    }
-
-    // Spoolman URL backup
-    if (LittleFS.exists("/spoolman_url.json")) {
-        File file = LittleFS.open("/spoolman_url.json", "r");
-        if (file) {
-            spoolmanUrlBackup = file.readString();
-            file.close();
-            Serial.println("Spoolman URL backed up");
-        }
-    }
-}
-
-void restoreJsonConfigs() {
-    // Restore Bambu credentials
-    if (bambuCredentialsBackup.length() > 0) {
-        File file = LittleFS.open("/bambu_credentials.json", "w");
-        if (file) {
-            file.print(bambuCredentialsBackup);
-            file.close();
-            Serial.println("Bambu credentials restored");
-        }
-        bambuCredentialsBackup = ""; // Clear backup
-    }
-
-    // Restore Spoolman URL
-    if (spoolmanUrlBackup.length() > 0) {
-        File file = LittleFS.open("/spoolman_url.json", "w");
-        if (file) {
-            file.print(spoolmanUrlBackup);
-            file.close();
-            Serial.println("Spoolman URL restored");
-        }
-        spoolmanUrlBackup = ""; // Clear backup
-    }
-}
-
-void espRestart() {
-    yield();
-    vTaskDelay(5000 / portTICK_PERIOD_MS);
-
-    ESP.restart();
-}
-
-
-void sendUpdateProgress(int progress, const char* status = nullptr, const char* message = nullptr) {
-    static int lastSentProgress = -1;
-    
-    // Verhindere zu häufige Updates
-    if (progress == lastSentProgress && !status && !message) {
-        return;
-    }
-    
-    String progressMsg = "{\"type\":\"updateProgress\",\"progress\":" + String(progress);
-    if (status) {
-        progressMsg += ",\"status\":\"" + String(status) + "\"";
-    }
-    if (message) {
-        progressMsg += ",\"message\":\"" + String(message) + "\"";
-    }
-    progressMsg += "}";
-    
-    if (progress >= 100) {
-        // Sende die Nachricht nur einmal für den Abschluss
-        ws.textAll("{\"type\":\"updateProgress\",\"progress\":100,\"status\":\"success\",\"message\":\"Update successful! Restarting device...\"}");
-        delay(50);
-    }
-
-    // Sende die Nachricht mehrmals mit Verzögerung für wichtige Updates
-    if (status || abs(progress - lastSentProgress) >= 10 || progress == 100) {
-        for (int i = 0; i < 2; i++) {
-            ws.textAll(progressMsg);
-            delay(100);  // Längerer Delay zwischen Nachrichten
-        }
-    } else {
-        ws.textAll(progressMsg);
-        delay(50);
-    }
-    
-    lastSentProgress = progress;
-}
-
-void handleUpdate(AsyncWebServer &server) {
-    AsyncCallbackWebHandler* updateHandler = new AsyncCallbackWebHandler();
-    updateHandler->setUri("/update");
-    updateHandler->setMethod(HTTP_POST);
-    
-    // Check if current version is less than defined TOOLVERSION before proceeding with update
-    if (isVersionLessThan(VERSION, TOOLDVERSION)) {
-        updateHandler->onRequest([](AsyncWebServerRequest *request) {
-            request->send(400, "application/json", 
-                "{\"success\":false,\"message\":\"Your current version is too old. Please perform a full upgrade.\"}");
-        });
-        server.addHandler(updateHandler);
-        return;
-    }
-
-    updateHandler->onUpload([](AsyncWebServerRequest *request, String filename,
-                             size_t index, uint8_t *data, size_t len, bool final) {
     if (!index) {
-            updateTotalSize = request->contentLength();
+        bool isFullImage = filename.endsWith("full.bin");
-            updateWritten = 0;
+        Serial.printf("Update Start: %s (type: %s)\n", filename.c_str(), isFullImage ? "full" : "OTA");
-            isSpiffsUpdate = (filename.indexOf("website") > -1);
         
-            if (isSpiffsUpdate) {
+        if (request->contentLength() == 0) {
-                // Backup vor dem Update
+            request->send(400, "application/json", "{\"status\":\"error\",\"message\":\"Invalid file size\"}");
-                sendUpdateProgress(0, "backup", "Backing up configurations...");
-                delay(200);
-                backupJsonConfigs();
-                delay(200);
-                
-                const esp_partition_t *partition = esp_partition_find_first(ESP_PARTITION_TYPE_DATA, ESP_PARTITION_SUBTYPE_DATA_SPIFFS, NULL);
-                if (!partition || !Update.begin(partition->size, U_SPIFFS)) {
-                    request->send(400, "application/json", "{\"success\":false,\"message\":\"Update initialization failed\"}");
             return;
         }
-                sendUpdateProgress(5, "starting", "Starting SPIFFS update...");
+
-                delay(200);
+        if (!tasksAreStopped && (RfidReaderTask || BambuMqttTask || ScaleTask)) {
+            stopAllTasks();
+            tasksAreStopped = true;
+        }
+
+        bool success;
+        if (isFullImage) {
+            // Full image update ohne Magic Byte Check, aber mit U_FLASH
+            success = Update.begin(UPDATE_SIZE_UNKNOWN, U_FLASH);
         } else {
-                if (!Update.begin(updateTotalSize)) {
+            // Normales OTA update mit Magic Byte Check
-                    request->send(400, "application/json", "{\"success\":false,\"message\":\"Update initialization failed\"}");
+            if (data[0] != 0xE9) {
+                Serial.printf("Wrong magic byte: 0x%02X (expected 0xE9)\n", data[0]);
+                request->send(400, "application/json", "{\"status\":\"error\",\"message\":\"Invalid firmware format\"}");
                 return;
             }
-                sendUpdateProgress(0, "starting", "Starting firmware update...");
+            success = Update.begin(request->contentLength());
-                delay(200);
+        }
+
+        if (!success) {
+            Update.printError(Serial);
+            request->send(400, "application/json", "{\"status\":\"error\",\"message\":\"Update start failed\"}");
+            return;
         }
     }
 
-        if (len) {
     if (Update.write(data, len) != len) {
-                request->send(400, "application/json", "{\"success\":false,\"message\":\"Write failed\"}");
+        Update.printError(Serial);
+        request->send(400, "application/json", "{\"status\":\"error\",\"message\":\"Write failed\"}");
         return;
     }
 
-            updateWritten += len;
-            int currentProgress;
-            
-            // Berechne den Fortschritt basierend auf dem Update-Typ
-            if (isSpiffsUpdate) {
-                // SPIFFS: 5-75% für Upload
-                currentProgress = 6 + (updateWritten * 100) / updateTotalSize;
-            } else {
-                // Firmware: 0-100% für Upload
-                currentProgress = 1 + (updateWritten * 100) / updateTotalSize;
-            }
-            
-            static int lastProgress = -1;
-            if (currentProgress != lastProgress && (currentProgress % 10 == 0 || final)) {
-                sendUpdateProgress(currentProgress, "uploading");
-                oledShowMessage("Update: " + String(currentProgress) + "%");
-                delay(50);
-                lastProgress = currentProgress;
-            }
-        }
-
     if (final) {
-            if (Update.end(true)) {
+        if (!Update.end(true)) {
-                if (isSpiffsUpdate) {
+            Update.printError(Serial);
-                    restoreJsonConfigs();
+            request->send(400, "application/json", "{\"status\":\"error\",\"message\":\"Update failed\"}");
-                }
-            } else {
-                request->send(400, "application/json", "{\"success\":false,\"message\":\"Update finalization failed\"}");
-            }
-        }
-    });
-
-    updateHandler->onRequest([](AsyncWebServerRequest *request) {
-        if (Update.hasError()) {
-            request->send(400, "application/json", "{\"success\":false,\"message\":\"Update failed\"}");
             return;
         }
-
+        Serial.println("Update successful, restarting...");
-        // Erste 100% Nachricht
+        request->send(200, "application/json", "{\"status\":\"success\",\"message\":\"Update successful! Device will restart...\",\"restart\":true}");
-        ws.textAll("{\"type\":\"updateProgress\",\"progress\":100,\"status\":\"success\",\"message\":\"Update successful! Restarting device...\"}");
+        delay(500);
-        vTaskDelay(2000 / portTICK_PERIOD_MS);
+        ESP.restart();
-        
-        AsyncWebServerResponse *response = request->beginResponse(200, "application/json", 
-            "{\"success\":true,\"message\":\"Update successful! Restarting device...\"}");
-        response->addHeader("Connection", "close");
-        request->send(response);
-        
-        // Zweite 100% Nachricht zur Sicherheit
-        ws.textAll("{\"type\":\"updateProgress\",\"progress\":100,\"status\":\"success\",\"message\":\"Update successful! Restarting device...\"}");
-        
-        espRestart();
-    });
-
-    server.addHandler(updateHandler);
     }
+}
+

src/ota.h

@@ -1,9 +1,14 @@
 #ifndef OTA_H
 #define OTA_H
 
-#include <ArduinoOTA.h>
 #include <ESPAsyncWebServer.h>
 
-void handleUpdate(AsyncWebServer &server);
+// Update size unknown constant, falls nicht bereits definiert
+#ifndef UPDATE_SIZE_UNKNOWN
+#define UPDATE_SIZE_UNKNOWN 0xFFFFFFFF
+#endif
+
+void stopAllTasks();
+void handleOTAUpload(AsyncWebServerRequest *request, String filename, size_t index, uint8_t *data, size_t len, bool final);
 
 #endif

src/scale.cpp

@@ -3,9 +3,9 @@
 #include <ArduinoJson.h>
 #include "config.h"
 #include "HX711.h"
+#include <EEPROM.h>
 #include "display.h"
 #include "esp_task_wdt.h"
-#include <Preferences.h>
 
 HX711 scale;
 
@@ -16,11 +16,6 @@ int16_t weight = 0;
 uint8_t weigthCouterToApi = 0;
 uint8_t scale_tare_counter = 0;
 uint8_t pauseMainTask = 0;
-uint8_t scaleCalibrated = 1;
-
-Preferences preferences;
-const char* NVS_NAMESPACE = "scale";
-const char* NVS_KEY_CALIBRATION = "cal_value";
 
 // ##### Funktionen für Waage #####
 uint8_t tareScale() {
@@ -47,28 +42,26 @@ void scale_loop(void * parameter) {
       weight = round(scale.get_units());
     }
     
-    vTaskDelay(pdMS_TO_TICKS(100));
+    vTaskDelay(pdMS_TO_TICKS(100)); // Verzögerung, um die CPU nicht zu überlasten
   }
 }
 
-uint8_t start_scale() {
+void start_scale() {
   Serial.println("Prüfe Calibration Value");
-  long calibrationValue;
+  long calibrationValue; // calibration value (see example file "Calibration.ino")
+  //calibrationValue = 696.0; // uncomment this if you want to set the calibration value in the sketch
 
-  // NVS lesen
+  EEPROM.begin(512);
-  preferences.begin(NVS_NAMESPACE, true); // true = readonly
+  EEPROM.get(calVal_eepromAdress, calibrationValue); // uncomment this if you want to fetch the calibration value from eeprom
-  calibrationValue = preferences.getLong(NVS_KEY_CALIBRATION, defaultScaleCalibrationValue);
+
-  preferences.end();
+  //calibrationValue = EEPROM.read(calVal_eepromAdress);
 
   Serial.print("Read Scale Calibration Value ");
   Serial.println(calibrationValue);
 
   scale.begin(LOADCELL_DOUT_PIN, LOADCELL_SCK_PIN);
 
-  if (isnan(calibrationValue) || calibrationValue < 1) {
+  if (isnan(calibrationValue) || calibrationValue < 1) calibrationValue = defaultScaleCalibrationValue;
-    calibrationValue = defaultScaleCalibrationValue;
-    scaleCalibrated = 0;
-  }
 
   oledShowMessage("Scale Tare Please remove all");
   for (uint16_t i = 0; i < 2000; i++) {
@@ -90,7 +83,7 @@ uint8_t start_scale() {
   BaseType_t result = xTaskCreatePinnedToCore(
     scale_loop, /* Function to implement the task */
     "ScaleLoop", /* Name of the task */
-    2048,  /* Stack size in words */
+    10000,  /* Stack size in words */
     NULL,  /* Task input parameter */
     scaleTaskPrio,  /* Priority of the task */
     &ScaleTask,  /* Task handle. */
@@ -101,8 +94,6 @@ uint8_t start_scale() {
   } else {
       Serial.println("ScaleLoop-Task erfolgreich erstellt");
   }
-
-  return (scaleCalibrated == 1) ? 1 : 3;
 }
 
 uint8_t calibrate_scale() {
@@ -110,7 +101,6 @@ uint8_t calibrate_scale() {
 
   //vTaskSuspend(RfidReaderTask);
   vTaskDelete(RfidReaderTask);
-  vTaskDelete(ScaleTask);
   pauseBambuMqttTask = true;
   pauseMainTask = 1;
 
@@ -147,19 +137,18 @@ uint8_t calibrate_scale() {
     {
       Serial.print("New calibration value has been set to: ");
       Serial.println(newCalibrationValue);
+      Serial.print("Save this value to EEPROM adress ");
+      Serial.println(calVal_eepromAdress);
 
-      // Speichern mit NVS
+      //EEPROM.put(calVal_eepromAdress, newCalibrationValue);
-      preferences.begin(NVS_NAMESPACE, false); // false = readwrite
+      EEPROM.put(calVal_eepromAdress, newCalibrationValue);
-      preferences.putLong(NVS_KEY_CALIBRATION, newCalibrationValue);
+      EEPROM.commit();
-      preferences.end();
 
-      // Verifizieren
+      EEPROM.get(calVal_eepromAdress, newCalibrationValue);
-      preferences.begin(NVS_NAMESPACE, true);
+      //newCalibrationValue = EEPROM.read(calVal_eepromAdress);
-      long verifyValue = preferences.getLong(NVS_KEY_CALIBRATION, 0);
-      preferences.end();
 
-      Serial.print("Verified stored value: ");
+      Serial.print("Read Value ");
-      Serial.println(verifyValue);
+      Serial.println(newCalibrationValue);
 
       Serial.println("End calibration, revome weight");
 
@@ -178,6 +167,8 @@ uint8_t calibrate_scale() {
         vTaskDelay(pdMS_TO_TICKS(1));
         esp_task_wdt_reset();
       }
+
+      //ESP.restart();
     }
     else
     {
@@ -211,7 +202,8 @@ uint8_t calibrate_scale() {
 
   oledShowMessage("Scale Ready");
 
-  Serial.println("restart Scale Task");
+  
+  Serial.println("starte Scale Task");
   start_scale();
 
   pauseBambuMqttTask = false;

src/scale.h

@@ -5,7 +5,7 @@
 #include "HX711.h"
 
 
-uint8_t start_scale();
+void start_scale();
 uint8_t calibrate_scale();
 uint8_t tareScale();
 
@@ -14,7 +14,6 @@ extern int16_t weight;
 extern uint8_t weigthCouterToApi;
 extern uint8_t scale_tare_counter;
 extern uint8_t pauseMainTask;
-extern uint8_t scaleCalibrated;
 
 extern TaskHandle_t ScaleTask;
 

src/website.cpp

@@ -7,16 +7,10 @@
 #include "nfc.h"
 #include "scale.h"
 #include "esp_task_wdt.h"
-#include <Update.h>
-#include "display.h"
 #include "ota.h"
 
-#ifndef VERSION
-  #define VERSION "1.1.0"
-#endif
-
 // Cache-Control Header definieren
-#define CACHE_CONTROL "max-age=604800" // Cache für 1 Woche
+#define CACHE_CONTROL "max-age=31536000" // Cache für 1 Jahr
 
 AsyncWebServer server(webserverPort);
 AsyncWebSocket ws("/ws");
@@ -24,7 +18,6 @@ AsyncWebSocket ws("/ws");
 uint8_t lastSuccess = 0;
 uint8_t lastHasReadRfidTag = 0;
 
-
 void onWsEvent(AsyncWebSocket *server, AsyncWebSocketClient *client, AwsEventType type, void *arg, uint8_t *data, size_t len) {
     if (type == WS_EVT_CONNECT) {
         Serial.println("Neuer Client verbunden!");
@@ -35,10 +28,6 @@ void onWsEvent(AsyncWebSocket *server, AsyncWebSocketClient *client, AwsEventTyp
         sendWriteResult(client, 3);
     } else if (type == WS_EVT_DISCONNECT) {
         Serial.println("Client getrennt.");
-    } else if (type == WS_EVT_ERROR) {
-        Serial.printf("WebSocket Client #%u error(%u): %s\n", client->id(), *((uint16_t*)arg), (char*)data);
-    } else if (type == WS_EVT_PONG) {
-        Serial.printf("WebSocket Client #%u pong\n", client->id());
     } else if (type == WS_EVT_DATA) {
         String message = String((char*)data);
         JsonDocument doc;
@@ -55,7 +44,7 @@ void onWsEvent(AsyncWebSocket *server, AsyncWebSocketClient *client, AwsEventTyp
         }
 
         else if (doc["type"] == "writeNfcTag") {
-            if (doc["payload"].is<JsonObject>()) {
+            if (doc.containsKey("payload")) {
                 // Versuche NFC-Daten zu schreiben
                 String payloadString;
                 serializeJson(doc["payload"], payloadString);
@@ -95,15 +84,6 @@ void onWsEvent(AsyncWebSocket *server, AsyncWebSocketClient *client, AwsEventTyp
             setBambuSpool(doc["payload"]);
         }
 
-        else if (doc["type"] == "setSpoolmanSettings") {
-            Serial.println(doc["payload"].as<String>());
-            if (updateSpoolBambuData(doc["payload"].as<String>())) {
-                ws.textAll("{\"type\":\"setSpoolmanSettings\",\"payload\":\"success\"}");
-            } else {
-                ws.textAll("{\"type\":\"setSpoolmanSettings\",\"payload\":\"error\"}");
-            }
-        }
-
         else {
             Serial.println("Unbekannter WebSocket-Typ: " + doc["type"].as<String>());
         }
@@ -113,12 +93,12 @@ void onWsEvent(AsyncWebSocket *server, AsyncWebSocketClient *client, AwsEventTyp
 // Funktion zum Laden und Ersetzen des Headers in einer HTML-Datei
 String loadHtmlWithHeader(const char* filename) {
     Serial.println("Lade HTML-Datei: " + String(filename));
-    if (!LittleFS.exists(filename)) {
+    if (!SPIFFS.exists(filename)) {
         Serial.println("Fehler: Datei nicht gefunden!");
         return "Fehler: Datei nicht gefunden!";
     }
 
-    File file = LittleFS.open(filename, "r");
+    File file = SPIFFS.open(filename, "r");
     String html = file.readString();
     file.close();
 
@@ -176,17 +156,6 @@ void sendAmsData(AsyncWebSocketClient *client) {
 }
 
 void setupWebserver(AsyncWebServer &server) {
-    // Deaktiviere alle Debug-Ausgaben
-    Serial.setDebugOutput(false);
-    
-    // WebSocket-Optimierungen
-    ws.onEvent(onWsEvent);
-    ws.enable(true);
-
-    // Konfiguriere Server für große Uploads
-    server.onRequestBody([](AsyncWebServerRequest *request, uint8_t *data, size_t len, size_t index, size_t total){});
-    server.onFileUpload([](AsyncWebServerRequest *request, const String& filename, size_t index, uint8_t *data, size_t len, bool final){});
-
     // Lade die Spoolman-URL beim Booten
     spoolmanUrl = loadSpoolmanUrl();
     Serial.print("Geladene Spoolman-URL: ");
@@ -195,7 +164,7 @@ void setupWebserver(AsyncWebServer &server) {
     // Route für about
     server.on("/about", HTTP_GET, [](AsyncWebServerRequest *request){
         Serial.println("Anfrage für /about erhalten");
-        AsyncWebServerResponse *response = request->beginResponse(LittleFS, "/index.html.gz", "text/html");
+        AsyncWebServerResponse *response = request->beginResponse(SPIFFS, "/index.html.gz", "text/html");
         response->addHeader("Content-Encoding", "gzip");
         response->addHeader("Cache-Control", CACHE_CONTROL);
         request->send(response);
@@ -204,7 +173,7 @@ void setupWebserver(AsyncWebServer &server) {
     // Route für Waage
     server.on("/waage", HTTP_GET, [](AsyncWebServerRequest *request){
         Serial.println("Anfrage für /waage erhalten");
-        AsyncWebServerResponse *response = request->beginResponse(LittleFS, "/waage.html.gz", "text/html");
+        AsyncWebServerResponse *response = request->beginResponse(SPIFFS, "/waage.html.gz", "text/html");
         response->addHeader("Content-Encoding", "gzip");
         response->addHeader("Cache-Control", CACHE_CONTROL);
         request->send(response);
@@ -213,13 +182,24 @@ void setupWebserver(AsyncWebServer &server) {
     // Route für RFID
     server.on("/", HTTP_GET, [](AsyncWebServerRequest *request){
         Serial.println("Anfrage für /rfid erhalten");
-        AsyncWebServerResponse *response = request->beginResponse(LittleFS, "/rfid.html.gz", "text/html");
+        AsyncWebServerResponse *response = request->beginResponse(SPIFFS, "/rfid.html.gz", "text/html");
         response->addHeader("Content-Encoding", "gzip");
         response->addHeader("Cache-Control", CACHE_CONTROL);
         request->send(response);
         Serial.println("RFID-Seite gesendet");
     });
 
+    /*
+    // Neue API-Route für das Abrufen der Spool-Daten
+    server.on("/api/spools", HTTP_GET, [](AsyncWebServerRequest *request){
+        Serial.println("API-Aufruf: /api/spools");
+        JsonDocument spoolsData = fetchSpoolsForWebsite();
+        String response;
+        serializeJson(spoolsData, response);
+        request->send(200, "application/json", response);
+    });
+    */
+
     server.on("/api/url", HTTP_GET, [](AsyncWebServerRequest *request){
         Serial.println("API-Aufruf: /api/url");
         String jsonResponse = "{\"spoolman_url\": \"" + String(spoolmanUrl) + "\"}";
@@ -229,7 +209,7 @@ void setupWebserver(AsyncWebServer &server) {
     // Route für WiFi
     server.on("/wifi", HTTP_GET, [](AsyncWebServerRequest *request){
         Serial.println("Anfrage für /wifi erhalten");
-        AsyncWebServerResponse *response = request->beginResponse(LittleFS, "/wifi.html.gz", "text/html");
+        AsyncWebServerResponse *response = request->beginResponse(SPIFFS, "/wifi.html.gz", "text/html");
         response->addHeader("Content-Encoding", "gzip");
         response->addHeader("Cache-Control", CACHE_CONTROL);
         request->send(response);
@@ -239,18 +219,13 @@ void setupWebserver(AsyncWebServer &server) {
     server.on("/spoolman", HTTP_GET, [](AsyncWebServerRequest *request){
         Serial.println("Anfrage für /spoolman erhalten");
         String html = loadHtmlWithHeader("/spoolman.html");
-        html.replace("{{spoolmanUrl}}", (spoolmanUrl != "") ? spoolmanUrl : "");
+        html.replace("{{spoolmanUrl}}", spoolmanUrl);
-        html.replace("{{spoolmanOctoEnabled}}", octoEnabled ? "checked" : "");
-        html.replace("{{spoolmanOctoUrl}}", (octoUrl != "") ? octoUrl : "");
-        html.replace("{{spoolmanOctoToken}}", (octoToken != "") ? octoToken : "");
 
         JsonDocument doc;
-        if (loadJsonValue("/bambu_credentials.json", doc) && doc["bambu_ip"].is<String>()) 
+        if (loadJsonValue("/bambu_credentials.json", doc) && doc.containsKey("bambu_ip")) {
-        {
             String bambuIp = doc["bambu_ip"].as<String>();
             String bambuSerial = doc["bambu_serialnr"].as<String>();
             String bambuCode = doc["bambu_accesscode"].as<String>();
-            autoSendToBambu = doc["autoSendToBambu"].as<bool>();
             bambuIp.trim();
             bambuSerial.trim();
             bambuCode.trim();
@@ -258,16 +233,6 @@ void setupWebserver(AsyncWebServer &server) {
             html.replace("{{bambuIp}}", bambuIp ? bambuIp : "");            
             html.replace("{{bambuSerial}}", bambuSerial ? bambuSerial : "");
             html.replace("{{bambuCode}}", bambuCode ? bambuCode : "");
-            html.replace("{{autoSendToBambu}}", autoSendToBambu ? "checked" : "");
-            html.replace("{{autoSendTime}}", String(autoSetBambuAmsCounter));
-        }
-        else
-        {
-            html.replace("{{bambuIp}}", "");
-            html.replace("{{bambuSerial}}", "");
-            html.replace("{{bambuCode}}", "");
-            html.replace("{{autoSendToBambu}}", "");
-            html.replace("{{autoSendTime}}", String(autoSetBambuAmsCounter));
         }   
 
         request->send(200, "text/html", html);
@@ -280,21 +245,10 @@ void setupWebserver(AsyncWebServer &server) {
             return;
         }
 
-        if (request->getParam("octoEnabled")->value() == "true" && (!request->hasParam("octoUrl") || !request->hasParam("octoToken"))) {
-            request->send(400, "application/json", "{\"success\": false, \"error\": \"Missing OctoPrint URL or Token parameter\"}");
-            return;
-        }
-
         String url = request->getParam("url")->value();
-        bool octoEnabled = (request->getParam("octoEnabled")->value() == "true") ? true : false;
-        String octoUrl = request->getParam("octoUrl")->value();
-        String octoToken = (request->getParam("octoToken")->value() != "") ? request->getParam("octoToken")->value() : "";
-
         url.trim();
-        octoUrl.trim();
-        octoToken.trim();
         
-        bool healthy = saveSpoolmanUrl(url, octoEnabled, octoUrl, octoToken);
+        bool healthy = saveSpoolmanUrl(url);
         String jsonResponse = "{\"healthy\": " + String(healthy ? "true" : "false") + "}";
 
         request->send(200, "application/json", jsonResponse);
@@ -310,20 +264,16 @@ void setupWebserver(AsyncWebServer &server) {
         String bambu_ip = request->getParam("bambu_ip")->value();
         String bambu_serialnr = request->getParam("bambu_serialnr")->value();
         String bambu_accesscode = request->getParam("bambu_accesscode")->value();
-        bool autoSend = (request->getParam("autoSend")->value() == "true") ? true : false;
-        String autoSendTime = request->getParam("autoSendTime")->value();
-        
         bambu_ip.trim();
         bambu_serialnr.trim();
         bambu_accesscode.trim();
-        autoSendTime.trim();
 
         if (bambu_ip.length() == 0 || bambu_serialnr.length() == 0 || bambu_accesscode.length() == 0) {
             request->send(400, "application/json", "{\"success\": false, \"error\": \"Empty parameter\"}");
             return;
         }
 
-        bool success = saveBambuCredentials(bambu_ip, bambu_serialnr, bambu_accesscode, autoSend, autoSendTime);
+        bool success = saveBambuCredentials(bambu_ip, bambu_serialnr, bambu_accesscode);
 
         request->send(200, "application/json", "{\"healthy\": " + String(success ? "true" : "false") + "}");
     });
@@ -336,7 +286,7 @@ void setupWebserver(AsyncWebServer &server) {
     // Route für das Laden der CSS-Datei
     server.on("/style.css", HTTP_GET, [](AsyncWebServerRequest *request){
         Serial.println("Lade style.css");
-        AsyncWebServerResponse *response = request->beginResponse(LittleFS, "/style.css.gz", "text/css");
+        AsyncWebServerResponse *response = request->beginResponse(SPIFFS, "/style.css.gz", "text/css");
         response->addHeader("Content-Encoding", "gzip");
         response->addHeader("Cache-Control", CACHE_CONTROL);
         request->send(response);
@@ -345,7 +295,7 @@ void setupWebserver(AsyncWebServer &server) {
 
     // Route für das Logo
     server.on("/logo.png", HTTP_GET, [](AsyncWebServerRequest *request){
-        AsyncWebServerResponse *response = request->beginResponse(LittleFS, "/logo.png.gz", "image/png");
+        AsyncWebServerResponse *response = request->beginResponse(SPIFFS, "/logo.png.gz", "image/png");
         response->addHeader("Content-Encoding", "gzip");
         response->addHeader("Cache-Control", CACHE_CONTROL);
         request->send(response);
@@ -354,7 +304,7 @@ void setupWebserver(AsyncWebServer &server) {
 
     // Route für Favicon
     server.on("/favicon.ico", HTTP_GET, [](AsyncWebServerRequest *request){
-        AsyncWebServerResponse *response = request->beginResponse(LittleFS, "/favicon.ico", "image/x-icon");
+        AsyncWebServerResponse *response = request->beginResponse(SPIFFS, "/favicon.ico", "image/x-icon");
         response->addHeader("Cache-Control", CACHE_CONTROL);
         request->send(response);
         Serial.println("favicon.ico gesendet");
@@ -362,26 +312,17 @@ void setupWebserver(AsyncWebServer &server) {
 
     // Route für spool_in.png
     server.on("/spool_in.png", HTTP_GET, [](AsyncWebServerRequest *request){
-        AsyncWebServerResponse *response = request->beginResponse(LittleFS, "/spool_in.png.gz", "image/png");
+        AsyncWebServerResponse *response = request->beginResponse(SPIFFS, "/spool_in.png.gz", "image/png");
         response->addHeader("Content-Encoding", "gzip");
         response->addHeader("Cache-Control", CACHE_CONTROL);
         request->send(response);
         Serial.println("spool_in.png gesendet");
     });
 
-    // Route für set_spoolman.png
-    server.on("/set_spoolman.png", HTTP_GET, [](AsyncWebServerRequest *request){
-        AsyncWebServerResponse *response = request->beginResponse(LittleFS, "/set_spoolman.png.gz", "image/png");
-        response->addHeader("Content-Encoding", "gzip");
-        response->addHeader("Cache-Control", CACHE_CONTROL);
-        request->send(response);
-        Serial.println("set_spoolman.png gesendet");
-    });
-
     // Route für JavaScript Dateien
     server.on("/spoolman.js", HTTP_GET, [](AsyncWebServerRequest *request){
         Serial.println("Anfrage für /spoolman.js erhalten");
-        AsyncWebServerResponse *response = request->beginResponse(LittleFS, "/spoolman.js.gz", "text/javascript");
+        AsyncWebServerResponse *response = request->beginResponse(SPIFFS, "/spoolman.js.gz", "text/javascript");
         response->addHeader("Content-Encoding", "gzip");
         response->addHeader("Cache-Control", CACHE_CONTROL);
         request->send(response);
@@ -390,29 +331,37 @@ void setupWebserver(AsyncWebServer &server) {
 
     server.on("/rfid.js", HTTP_GET, [](AsyncWebServerRequest *request){
         Serial.println("Anfrage für /rfid.js erhalten");
-        AsyncWebServerResponse *response = request->beginResponse(LittleFS,"/rfid.js.gz", "text/javascript");
+        AsyncWebServerResponse *response = request->beginResponse(SPIFFS,"/rfid.js.gz", "text/javascript");
         response->addHeader("Content-Encoding", "gzip");
         response->addHeader("Cache-Control", CACHE_CONTROL);
         request->send(response);
         Serial.println("RFID.js gesendet");
     });
 
-    // Vereinfachter Update-Handler
+    // Route for Firmware Update
     server.on("/upgrade", HTTP_GET, [](AsyncWebServerRequest *request) {
-        AsyncWebServerResponse *response = request->beginResponse(LittleFS, "/upgrade.html.gz", "text/html");
+        // During OTA, reduce memory usage
+        ws.enable(false);  // Temporarily disable WebSocket
+        ws.cleanupClients();
+        
+        Serial.println("Request for /upgrade received");
+        AsyncWebServerResponse *response = request->beginResponse(SPIFFS, "/upgrade.html.gz", "text/html");
         response->addHeader("Content-Encoding", "gzip");
-        response->addHeader("Cache-Control", "no-store");
+        response->addHeader("Cache-Control", CACHE_CONTROL);
         request->send(response);
     });
 
-    // Update-Handler registrieren
+    server.on("/update", HTTP_POST, 
-    handleUpdate(server);
+        [](AsyncWebServerRequest *request) {
-
+            // The response will be sent from handleOTAUpload when the upload is complete
-    server.on("/api/version", HTTP_GET, [](AsyncWebServerRequest *request){
+        },
-        String fm_version = VERSION;
+        [](AsyncWebServerRequest *request, const String& filename, size_t index, uint8_t *data, size_t len, bool final) {
-        String jsonResponse = "{\"version\": \""+ fm_version +"\"}";
+            // Free memory before handling update
-        request->send(200, "application/json", jsonResponse);
+            ws.enable(false);
-    });
+            ws.cleanupClients();
+            handleOTAUpload(request, filename, index, data, len, final);
+        }
+    );
 
     // Fehlerbehandlung für nicht gefundene Seiten
     server.onNotFound([](AsyncWebServerRequest *request){

src/website.h

@@ -6,8 +6,8 @@
 #include "commonFS.h"
 #include "api.h"
 #include <ArduinoJson.h>
-#include <Update.h>
+#include <ESPAsyncWebServer.h>
-#include <AsyncTCP.h>
+#include <AsyncWebSocket.h>
 #include "bambu.h"
 #include "nfc.h"
 #include "scale.h"
@@ -17,12 +17,7 @@ extern String spoolmanUrl;
 extern AsyncWebServer server;
 extern AsyncWebSocket ws;
 
-// Server-Initialisierung und Handler
-void initWebServer();
-void handleBody(AsyncWebServerRequest *request, uint8_t *data, size_t len, size_t index, size_t total);
 void setupWebserver(AsyncWebServer &server);
-
-// WebSocket-Funktionen
 void sendAmsData(AsyncWebSocketClient *client);
 void sendNfcData(AsyncWebSocketClient *client);
 void foundNfcTag(AsyncWebSocketClient *client, uint8_t success);

src/wlan.cpp

@@ -3,69 +3,29 @@
 #include <WiFi.h>
 #include <esp_wifi.h>
 #include <WiFiManager.h>
-#include <DNSServer.h>
-#include <ESPmDNS.h>
 #include "display.h"
 #include "config.h"
 
 WiFiManager wm;
 bool wm_nonblocking = false;
-uint8_t wifiErrorCounter = 0;
-
-void wifiSettings() {
-    // Optimierte WiFi-Einstellungen
-    WiFi.mode(WIFI_STA); // explicitly set mode, esp defaults to STA+AP
-    WiFi.setSleep(false); // disable sleep mode
-    WiFi.setHostname("FilaMan");
-    esp_wifi_set_ps(WIFI_PS_NONE);
-    
-    // Maximale Sendeleistung
-    WiFi.setTxPower(WIFI_POWER_19_5dBm); // Set maximum transmit power
-  
-    // Optimiere TCP/IP Stack
-    esp_wifi_set_protocol(WIFI_IF_STA, WIFI_PROTOCOL_11B | WIFI_PROTOCOL_11G | WIFI_PROTOCOL_11N);
-    
-    // Aktiviere WiFi-Roaming für bessere Stabilität
-    esp_wifi_set_rssi_threshold(-80);
-}
-
-void startMDNS() {
-  if (!MDNS.begin("filaman")) {
-    Serial.println("Error setting up MDNS responder!");
-    while(1) {
-      vTaskDelay(1000 / portTICK_PERIOD_MS);
-    }
-  }
-  Serial.println("mDNS responder started");
-}
-
-void configModeCallback (WiFiManager *myWiFiManager) {
-  Serial.println("Entered config mode");
-  oledShowTopRow();
-  oledShowMessage("WiFi Config Mode");
-}
 
 void initWiFi() {
-  // load Wifi settings
+    WiFi.mode(WIFI_STA); // explicitly set mode, esp defaults to STA+AP
-  wifiSettings();
   
-  wm.setAPCallback(configModeCallback);
+    //esp_wifi_set_max_tx_power(72); // Setze maximale Sendeleistung auf 20dBm
-
-  wm.setSaveConfigCallback([]() {
-    Serial.println("Configurations updated");
-    ESP.restart();
-  });
   
     if(wm_nonblocking) wm.setConfigPortalBlocking(false);
-  //wm.setConfigPortalTimeout(320); // Portal nach 5min schließen
+    wm.setConfigPortalTimeout(320); // Portal nach 5min schließen
-  wm.setWiFiAutoReconnect(true);
-  wm.setConnectTimeout(5);
   
     oledShowTopRow();
     oledShowMessage("WiFi Setup");
     
-  //bool res = wm.autoConnect("FilaMan"); // anonymous ap
+    bool res;
-  if(!wm.autoConnect("FilaMan")) {
+    // res = wm.autoConnect(); // auto generated AP name from chipid
+    res = wm.autoConnect("FilaMan"); // anonymous ap
+    // res = wm.autoConnect("spoolman","password"); // password protected ap
+  
+    if(!res) {
       Serial.println("Failed to connect or hit timeout");
       // ESP.restart();
       oledShowTopRow();
@@ -81,49 +41,5 @@ void initWiFi() {
   
       oledShowTopRow();
       display.display();
-
-    vTaskDelay(500 / portTICK_PERIOD_MS);
-
-    // mDNS
-    startMDNS();
-  }
-}
-
-void checkWiFiConnection() {
-  if (WiFi.status() != WL_CONNECTED) 
-  {
-    Serial.println("WiFi connection lost. Reconnecting...");
-    wifiOn = false;
-    oledShowTopRow();
-    oledShowMessage("WiFi reconnecting");
-    WiFi.reconnect(); // Versuche, die Verbindung wiederherzustellen
-    vTaskDelay(5000 / portTICK_PERIOD_MS); // Warte 5 Sekunden, bevor erneut geprüft wird
-    if (WiFi.status() != WL_CONNECTED) 
-    {
-      Serial.println("Failed to reconnect. Restarting WiFi...");
-      WiFi.disconnect();
-      Serial.println("WiFi disconnected.");
-      vTaskDelay(1000 / portTICK_PERIOD_MS);
-      wifiErrorCounter++;
-
-      //wifiSettings();
-      WiFi.reconnect();
-      Serial.println("WiFi reconnecting...");
-      WiFi.waitForConnectResult();
-    } 
-    else 
-    {
-      Serial.println("WiFi reconnected.");
-      wifiErrorCounter = 0;
-      wifiOn = true;
-      oledShowTopRow();
-      startMDNS();
-    }
-  }
-
-  if (wifiErrorCounter >= 5) 
-  {
-    Serial.println("Too many WiFi errors. Restarting...");
-    ESP.restart();
     }
   }

src/wlan.h

@@ -4,6 +4,5 @@
 #include <Arduino.h>
 
 void initWiFi();
-void checkWiFiConnection();
 
 #endif