diff --git a/.github/workflows/gitea-release.yml b/.github/workflows/providers/gitea-release.yml
similarity index 100%
rename from .github/workflows/gitea-release.yml
rename to .github/workflows/providers/gitea-release.yml
diff --git a/.github/workflows/github-release.yml b/.github/workflows/providers/github-release.yml
similarity index 100%
rename from .github/workflows/github-release.yml
rename to .github/workflows/providers/github-release.yml
diff --git a/.github/workflows/release.yml b/.github/workflows/release.yml
index b7fe787..6a0775a 100644
--- a/.github/workflows/release.yml
+++ b/.github/workflows/release.yml
@@ -56,201 +56,15 @@ jobs:
   github-release:
     needs: [route, verify-provider]
     if: needs.route.outputs.provider == 'github'
-    runs-on: ubuntu-latest
-    permissions:
-      contents: write
-    steps:
-    - uses: actions/checkout@v4
-    - name: Set up Python
-      uses: actions/setup-python@v4
-      with:
-        python-version: '3.x'
-    - name: Install PlatformIO
-      run: |
-        python -m pip install --upgrade pip
-        pip install --upgrade platformio esptool
-    - name: Install xxd
-      run: |
-        sudo apt-get update
-        sudo apt-get install xxd
-    - name: Check for Data changes
-      id: check_data
-      run: |
-        git fetch --unshallow || true
-        CHANGED_FILES=$(git diff --name-only HEAD^..HEAD)
-        if echo "$CHANGED_FILES" | grep -q "^data/"; then
-          echo "DATA_CHANGED=true" >> $GITHUB_OUTPUT
-        else
-          echo "DATA_CHANGED=false" >> $GITHUB_OUTPUT
-        fi
-    - name: Check for SPIFFS changes
-      id: check_spiffs
-      run: |
-        git fetch --unshallow || true
-        CHANGED_FILES=$(git diff --name-only HEAD^..HEAD)
-        if echo "$CHANGED_FILES" | grep -q "^data/\|^html/"; then
-          echo "SPIFFS_CHANGED=true" >> $GITHUB_OUTPUT
-        else
-          echo "SPIFFS_CHANGED=false" >> $GITHUB_OUTPUT
-        fi
-    - name: Build Firmware
-      run: |
-        VERSION=$(grep '^version = ' platformio.ini | cut -d'"' -f2)
-        echo "Building firmware and SPIFFS..."
-        pio run -e esp32dev
-        pio run -t buildfs
-        cp .pio/build/esp32dev/firmware.bin .pio/build/esp32dev/filaman_${VERSION}.bin
-        cp .pio/build/esp32dev/spiffs.bin .pio/build/esp32dev/webpage_${VERSION}.bin
-        (cd .pio/build/esp32dev && esptool.py --chip esp32 merge_bin --fill-flash-size 4MB --flash_mode dio --flash_freq 40m --flash_size 4MB -o filaman_full_${VERSION}.bin 0x1000 bootloader.bin 0x8000 partitions.bin 0x10000 firmware.bin 0x390000 spiffs.bin)
-        echo "File sizes:"
-        (cd .pio/build/esp32dev && ls -lh *.bin)
-    - name: Get version from platformio.ini
-      id: get_version
-      run: |
-        VERSION=$(grep '^version = ' platformio.ini | cut -d'"' -f2)
-        echo "VERSION=$VERSION" >> $GITHUB_OUTPUT
-    - name: Read CHANGELOG.md
-      id: changelog
-      run: |
-        VERSION=${{ steps.get_version.outputs.VERSION }}
-        CHANGELOG=$(awk "/## \[$VERSION\]/{p=1;print;next} /## \[/{p=0} p" CHANGELOG.md)
-        echo "CHANGES<<EOF" >> $GITHUB_OUTPUT
-        echo "$CHANGELOG" >> $GITHUB_OUTPUT
-        echo "EOF" >> $GITHUB_OUTPUT
-    - name: Create GitHub Release
-      env:
-        GH_TOKEN: ${{ secrets.GITHUB_TOKEN }}
-      run: |
-        VERSION=${{ steps.get_version.outputs.VERSION }}
-        cd .pio/build/esp32dev
-        FILES_TO_UPLOAD=""
-        if [ -f "filaman_${VERSION}.bin" ]; then
-          FILES_TO_UPLOAD="$FILES_TO_UPLOAD filaman_${VERSION}.bin"
-        fi
-        if [ -f "webpage_${VERSION}.bin" ]; then
-          FILES_TO_UPLOAD="$FILES_TO_UPLOAD webpage_${VERSION}.bin"
-        fi
-        if [ -f "filaman_full_${VERSION}.bin" ]; then
-          FILES_TO_UPLOAD="$FILES_TO_UPLOAD filaman_full_${VERSION}.bin"
-        fi
-        if [ -n "$FILES_TO_UPLOAD" ]; then
-          if [ "${{ needs.route.outputs.provider }}" = "github" ]; then
-            gh release create "v${VERSION}" --title "Release ${VERSION}" --notes "${{ steps.changelog.outputs.CHANGES }}" $FILES_TO_UPLOAD
-          elif [ "${{ needs.route.outputs.provider }}" = "gitea" ]; then
-            API_URL="${{ needs.route.outputs.gitea_server_url }}/api/v1"
-            REPO="${{ needs.route.outputs.gitea_repository }}"
-            RESPONSE=$(curl -k -s -X POST -H "Authorization: token ${TOKEN}" -H "Content-Type: application/json" -d "{\"tag_name\":\"v${VERSION}\",\"name\":\"Release ${VERSION}\",\"body\":\"${{ steps.changelog.outputs.CHANGES }}\"}" "${API_URL}/repos/${REPO}/releases")
-            RELEASE_ID=$(echo "$RESPONSE" | grep -o '"id":[0-9]*' | cut -d':' -f2 | head -n1)
-            if [ -n "$RELEASE_ID" ]; then
-              echo "Release created with ID: $RELEASE_ID"
-              for file in $FILES_TO_UPLOAD; do
-                echo "Uploading $file..."
-                curl -k -s -X POST -H "Authorization: token ${TOKEN}" -H "Content-Type: application/octet-stream" --data-binary "@.pio/build/esp32dev/$file" "${API_URL}/repos/${REPO}/releases/${RELEASE_ID}/assets?name=$file"
-              done
-            else
-              echo "Failed to create release. Response:"
-              echo "$RESPONSE"
-              exit 1
-            fi
-          else
-            echo "Error: Unknown provider"
-            exit 1
-          fi
-        else
-          echo "Error: No files found to upload"
-          exit 1
+    uses: ./.github/workflows/providers/github-release.yml
 
   gitea-release:
     needs: [route, verify-provider]
     if: needs.route.outputs.provider == 'gitea'
-    runs-on: ubuntu-latest
-    steps:
-    - uses: actions/checkout@v4
-    - name: Set up Python
-      uses: actions/setup-python@v4
-      with:
-        python-version: '3.x'
-    - name: Install PlatformIO
-      run: |
-        python -m pip install --upgrade pip
-        pip install --upgrade platformio esptool
-    - name: Install xxd
-      run: |
-        sudo apt-get update
-        sudo apt-get install xxd
-    - name: Check for SPIFFS changes
-      id: check_spiffs
-      run: |
-        git fetch --unshallow || true
-        CHANGED_FILES=$(git diff --name-only HEAD^..HEAD)
-        if echo "$CHANGED_FILES" | grep -q "^data/\|^html/"; then
-          echo "SPIFFS_CHANGED=true" >> $GITHUB_OUTPUT
-        else
-          echo "SPIFFS_CHANGED=false" >> $GITHUB_OUTPUT
-        fi
-    - name: Check for Data changes
-      id: check_data
-      run: |
-        git fetch --unshallow || true
-        CHANGED_FILES=$(git diff --name-only HEAD^..HEAD)
-        if echo "$CHANGED_FILES" | grep -q "^data/"; then
-          echo "DATA_CHANGED=true" >> $GITHUB_OUTPUT
-        else
-          echo "DATA_CHANGED=false" >> $GITHUB_OUTPUT
-        fi
-    - name: Get version from platformio.ini
-      id: get_version
-      run: |
-        VERSION=$(grep '^version = ' platformio.ini | cut -d'"' -f2)
-        echo "VERSION=$VERSION" >> $GITHUB_OUTPUT
-    - name: Build Firmware
-      run: |
-        VERSION=${{ steps.get_version.outputs.VERSION }}
-        echo "Building firmware and SPIFFS..."
-        pio run -e esp32dev
-        pio run -t buildfs
-        cp .pio/build/esp32dev/firmware.bin .pio/build/esp32dev/filaman_${VERSION}.bin
-        cp .pio/build/esp32dev/spiffs.bin .pio.build/esp32dev/webpage_${VERSION}.bin
-        (cd .pio/build/esp32dev && esptool.py --chip esp32 merge_bin --fill-flash-size 4MB --flash_mode dio --flash_freq 40m --flash_size 4MB -o filaman_full_${VERSION}.bin 0x1000 bootloader.bin 0x8000 partitions.bin 0x10000 firmware.bin 0x390000 spiffs.bin)
-        echo "File sizes:"
-        (cd .pio/build/esp32dev && ls -lh *.bin)
-    - name: Prepare binaries
-      run: |
-        VERSION=${{ steps.get_version.outputs.VERSION }}
-        if [[ "${{ steps.check_spiffs.outputs.SPIFFS_CHANGED }}" == "true" ]]; then
-          echo "Creating full binary..."
-          cd .pio/build/esp32dev && esptool.py --chip esp32 merge_bin --fill-flash-size 4MB --flash_mode dio --flash_freq 40m --flash_size 4MB -o filaman_full_${VERSION}.bin 0x0000 bootloader.bin 0x8000 partitions.bin 0x10000 firmware.bin 0x390000 spiffs.bin
-        fi
-        echo "File sizes:"
-        cd .pio/build/esp32dev && ls -lh *.bin
-    - name: Read CHANGELOG.md
-      id: changelog
-      run: |
-        VERSION=${{ steps.get_version.outputs.VERSION }}
-        CHANGELOG=$(awk "/## \[$VERSION\]/{p=1;print;next} /## \[/{p=0} p" CHANGELOG.md)
-        echo "CHANGES<<EOF" >> $GITHUB_OUTPUT
-        echo "$CHANGELOG" >> $GITHUB_OUTPUT
-        echo "EOF" >> $GITHUB_OUTPUT
-    - name: Create Release
-      run: |
-        API_URL="${{ needs.route.outputs.gitea_server_url }}/api/v1"
-        REPO="${{ needs.route.outputs.gitea_repository }}"
-        VERSION=${{ steps.get_version.outputs.VERSION }}
-        RESPONSE=$(curl -k -s -X POST -H "Authorization: token ${TOKEN}" -H "Content-Type: application/json" -d "{\"tag_name\":\"v${VERSION}\",\"name\":\"Release ${VERSION}\",\"body\":\"${{ steps.changelog.outputs.CHANGES }}\"}" "${API_URL}/repos/${REPO}/releases")
-        RELEASE_ID=$(echo "$RESPONSE" | grep -o '"id":[0-9]*' | cut -d':' -f2 | head -n1)
-        if [ -n "$RELEASE_ID" ]; then
-          echo "Release created with ID: $RELEASE_ID"
-          for file in filaman_${VERSION}.bin filaman_full_${VERSION}.bin; do
-            if [ -f ".pio/build/esp32dev/$file" ]; then
-              echo "Uploading $file..."
-              curl -k -s -X POST -H "Authorization: token ${TOKEN}" -H "Content-Type: application/octet-stream" --data-binary "@.pio/build/esp32dev/$file" "${API_URL}/repos/${REPO}/releases/${RELEASE_ID}/assets?name=$file"
-            fi
-          done
-          if [ -f ".pio/build/esp32dev/webpage_${VERSION}.bin" ]; then
-            echo "Uploading webpage binary..."
-            curl -k -s -X POST -H "Authorization: token ${TOKEN}" -H "Content-Type: application/octet-stream" --data-binary "@.pio/build/esp32dev/webpage_${VERSION}.bin" "${API_URL}/repos/${REPO}/releases/${RELEASE_ID}/assets?name=webpage_${VERSION}.bin"
-          fi
-        else
-          echo "Failed to create release. Response:"
-          echo "$RESPONSE"
-          exit 1
\ No newline at end of file
+    uses: ./.github/workflows/providers/gitea-release.yml
+    with:
+      gitea_ref_name: ${{ needs.route.outputs.gitea_ref_name }}
+      gitea_server_url: ${{ needs.route.outputs.gitea_server_url }}
+      gitea_repository: ${{ needs.route.outputs.gitea_repository }}
+    secrets:
+      GITEA_TOKEN: ${{ secrets.GITEA_TOKEN }}
\ No newline at end of file